AmateurRadio.com

was in the mail when I got home from work – an envelope from the ARRL.  I had recently updated my LOTW log and sent in an application for a bunch of DXCC entities that I had worked.  That application put  me over the 150 DXCC entities worked mark, so the League sent me a little “DXCC 150” sticker for my basic certificate.  I am surmising that you can get an endorsement stickers for multiples of 50 DXCC entities worked, ie 150, 200, 250, 300 and finally 320 and then Honor Roll, I guess.

This submission brought me up to 151 confirmed.  I actually have 3 or 4 more in the log with stations that do not use LOTW, so I will have to get their confirmations the old fashioned way.

In addition to those 3 or 4 I just mentioned, you can add another, as I worked SX5KL in the Dodecanese Islands for another new DXCC entity worked.  I actually worked him twice (yes, I know I’m a hog) once QRO and then about 90 minutes later QRP.  The first time, he was about a 579 here – 90 minutes later, he was blasting through at 599+ and the pileup wasn’t very fierce.  So I took the chance and got through the second time with 5 Watts and thanked him for listening to my QRP signal.

On an entirely different note, I’d like to take this opportunity to extend my best wishes for a very safe journey to all of you out there who are traveling toward FDIM and Hamvention.  I hope the weather is great for you and that you all have a great time.  I wish that I could be with you guys at FDIM, and finally meet face to face with so many of you that I have come to consider to be good friends.

To paraphrase W.C. Fields – “All things considered, I’d rather be in Dayton”.

72 de Larry W2LJ
QRP – When you care to send the very least!

A ham with a parrot on his shoulder walk into a bar.

Barkeeper asks “where did you get that?”

“Dayton” says the parrot.

Do you want a treat?  Some “eye candy”?  Some really beautiful workmanship and craftsmanship?  Do you want to see what really excellent home brewing looks like?

http://aa7ee.wordpress.com/2013/05/11/the-na5n-desert-ratt-2-regen/

All I can say is “Wow, I wish I could build stuff that looks this good!”

72 de Larry W2LJ
QRP – When you care to send the very least!

Well, actually, as seen on eBay.  These are a few things I’ve seen on eBay that made me look twice (OK, maybe more than twice) :

Readers, check out the Cyclone 40 in this release:

A new kit from the Four State QRP Group and David Cripe (NM0S)

NM0S’s Cylcone 40M QRP transceiver. Look for it at Four Days in May!

Arising from Dave’s entry in QRP ARCI’s 72 Part Challenge Design Contest in 2010, the Cyclone 40 is an enhanced version of the original design. The transceiver designed for the design contest had 72 total parts, performed well, and won honorable mention. This improved version has less than 100 components and even better performance! The kit features all through hole parts and easy assembly. The receiver is a superhet design with very good sensitivity and selectivity, and tunes the entire 125 kHZ CW segment of the 40M Band – and does so at a comfortable tuning rate. A frequency readout is included so you know where you are at all times.

This is a complete kit, including the enclosure. A high quality board package includes the pc board, front and back panels, the sides, and top and bottom all of which make up the enclosure. The control and jack labels are silk screened in white letters and vividly contrast with the black solder mask, and the holes for the connectors and controls are pre-drilled. The ends are “dovetailed” together making a very rugged, easy to build, and attractive enclosure.

Features and Specifications

General

• Enclosure: A very nice predrilled and silkscreened enclosure is included. It’s easy to assemble and looks great.
• Ergonomics: Smooth solid tuning, a quiet receiver with QSK and well behaved AGC. Nicely laid out front and rear panels.
• VFO: The VFO is a simple PTO design, is very stable, and also quite easy to build
• Sidetone: Included!
• AGC: Audio derived, fast and smooth.
• Frequency Range: 7.000 – 7.125 typical.
• Tuning Speed: 10kHz/knob turn typical.
• Stability: 300 HZ the first 5 min after power up, less than 10 HZ/hour after that.
• QSK: Fantastic QSK! Full Break in, excellent muting, really fast!
• All Through Hole Parts There are NO SMT parts in this kit, and only three easy to wind toroids.
• Dimensions: 4.4 x 3.6 x 1.9″
• Power Connector: 2.5×5.5mm coaxial, center positive. Should be fused at 1A, fast blow at PS
• Antenna connector: BNC

Receiver

• Configuration: Superheterodyne, 11 MHZ IF, 4 Crystal IF Filter.
• Sensitivity: MDS (Minimum Discernable Signal) -125, Typical, below the normal 40M band noise level.
• Selectivity: Four crystal, 500 HZ IF filter
• IMD3: 90 dB typical, better than most commercial gear!
• IP3: +10 dBm typical – another very good number
• Frequency Readout: 3 or 4 digit CW, 1 kHz or 100 Hz resolution (user selectable), developed by Adrian Hill, KCØYOI.
• Band Edge Marker: A band edge marker is heard at 7.001 MHZ
• Headphone Jack: 1/8″ stereo, standard earbud/Walkman® headphone compatible
• DC Current consumption: 30 ma typical at 13.6 VDC.

Transmitter

• Configuration: Stable, Wide Range VFO (PTO design), Efficient Class E Final.
• Spectral Purity: All harmonics and spurs less than 50dB below the carrier.
• Output Power: approximately 4W into 50 ohms
• DC Current consumption: 500ma typical at 13.6 VDC Will operate down to 9v DC.
• Key Jack: 1/8″ stereo, grounded shell, switching the tip keys TX. Contacts accessible for an internal add-on keyer

Kits should be available at QRP ARCI’s Four Days in May conference at Dayton, and will be for sale on the Four State QRP Group’s web site approximately May 20th. The final price hasn’t been determined yet but should be less than $100 plus shipping.

Today is a day I thought I’d never see – my 60th birthday.

Even on such a special occasion you can’t keep me away from the radio and computer!