AmateurRadio.com

I participated in the QRP-ARCI Summer Homebrew Sprint for only a very little this afternoon.  But thankfully, quality is not defined by quantity, so the QSOs, while few in number were great in fun.

I began by operating on 20 Meters.  The Buddistick was set up with two 11 inch arms, the coil and the super long whip atop the Jeep on the magmount.  With my coil tapped in the normal 20 Meter spot that I am accustomed to, the Autek analyser displayed an SWR of 1.4:1.  I hit the ATU button anyway, for a very short “Brrrrp” and got a 1:1 match.

While on 20 Meters, as I was calling “CQ QRP” for a bit, and much to my surprise I was answered by Fred G4HOM out of Birmingham, England.  He was much louder than the stateside stations that I was working; so I immediately thought “tower and beam”. Nope!  Fred was using his K2 at 10 Watts to a simple wire – propagation, being what it was, favored a QSO between Lake George and Birmingham.  Signal reports were good both ways.

Shortly thereafter, I switched to 40 Meters by undoing the tap from the coil to take advantage of the entire Buddistick coil, and I added two more 11 inch arms.  After a bit of a scare that I won’t go into here (due to my own stupidity), the KX3 had matched the Buddistick to 1.4:1 on 40 Meters. I had several QSOs down around 7.030 MHz, including one with my very good friend Bob, W3BBO.  This was our first QSO while I have been at Lake George.  He had a good 579 signal and gave me a good report as well.

The Buddistick on the magmount, using the vehicle as a ground plane is great combination.  Thanks to W3BBO for getting me to try that.  It works so well that I may just forego using the EFHW wires unless I am on the hiking trail later this week.

Oh, I don’t remember if I mentioned this; but I decided to leave the Lead Acid battery home.  I am going strictly with the Lithium Ion this week.  It held up very well this afternoon.  I never dropped from 5 Watts output throughout the couple of hours of operating time this afternoon, including a few prolonged “CQ QRP” sessions.  I think “The Little Blue Guy” will be quite adequate for my needs.

72 de Larry W2LJ
QRP – When you care to send the very least!

Well, this afternoon and tonight. It starts at 4:00 PM Eastern and lasts until 8:00 PM. And this will be the first big test of the KX3 in the portable environment.

We are up here at the Lake (George); and what a difference location makes. When we got here, I called my friend who is staying at our house and is dog sitting for us. He told me that back in South Plainfield, it was 102F (39C). Up here at the lake, it was a beautiful 78F (26C).

So the plan for today will be to operate from right near the cabin. I think I will go with the Buddistick attached to the magmount using the Jeep as the ground plane. That arrangement has worked well in the past. I will probably stick to 20 and 40 Meters; but may also give 15 Meters a try. According to the latest solar-terrestrial chart, 15 Meters should be in good condition today.

I brought the Autek antenna analyzer along to help quicken the process of setting up the Buddisitck. Thinking about it, I probably could have left it home. Using the Buddistick on the magmount is actually quite easy to set up. All I really have to do is set up the “standard” configuration, set the tap on the coil for loudest receive noise and let the KX3’s auto tuner handle the rest. The analyzer comes in real handy when setting the BStick up in the field and for dealing with finding the best length for the counterpoise wire.

So hopefully, i will hear some of you on the bands later today. Please give a listen for ol’ W2LJ.

72 de Larry W2LJ
QRP – When you care to send the very least!

Wowsers!

Both 20 Meter foxes worked within the first 10 minutes of the hunt.  That doesn’t occur very often, but when it does it’s gratifying.  The K3 (and the KX3) really makes it easy with those dual VFO knobs.  Hit split, listen on VFO A, dial up the transmit frequency with the VFO B knob and got to town.  No more hitting the A/B button and trying to deal with tuning two separate VFOs with one knob.  Probably a minor thing when you consider it, but oh so convenient!

The Maxpedition padded pouch arrived today and it is perfect!  Fits the KX3 just fine and will protect it from anything else that’s in the knapsack.  Not that there’s really that much in there, but I still worry about something jouncing around and doing damage.  I had the K1 in a “Tupperware” container all those years and it stayed looking mint.  I am sure this padded pouch will do the same for the KX3.

KX3
Antenna wire
Small SLA battery (and small gel cel charger – going to charge off the grid this year)
Lithium Ion battery
Paddles
Earbuds
Autek antenna analyzer (to make setting up the Buddistick easier).
Pad and misc supplies
Wrist rocket

Still, that’s enough to carry along when we go to Lake George later this summer – and for the Flight of the Bumblebees and the Skeeter Hunt as well.

The SLA battery is being taken as a back up only.  If the Lithium Ion performs admirably and gives me a decent amount of radio time between charges, the SLA will stay home in the future.  That would certainly lighten things up.

72 de Larry W2LJ
QRP – When you care to send the very least!

‘Twas one of those days at work where I felt like I was beaten with a pool cue, run over by a bus and then dragged in by the cat.

Read all about it and apply for your FOBB number here:

http://www.ARSqrp.blogspot.com

Thanks to Rich Fisher KI6SN and the Adventure Radio Society for keeping this fun Summertime QRP tradition going!

72 de Larry W2LJ
QRP – When you care to send the very least!

but definitely not quite as bad as yesterday.  The high for today was only around 94F – about 5 degrees cooler than yesterday.

Looks like we might get some thunderstorms tonight – I’ve got some chicken, potatoes and corn-on-th-cob on the grill.  Hope it waits until AFTER dinner is cooked!

Tonight’s plan is to start working on the K3.  I’m really torn between using the KX3 and having some operating fun and the build of the new radio.  Another determining factor is that I am beginning to pack away the KX3 in preparation for vacation soon.  I need to finalize the logistics of my new Lowepro “portable ops” pack.  I’ll try and shoot some photos or perhaps a video once I get the final configuration down.

Radio, key, battery and accessories aren’t the problem.  The problem is figuring out which antennas to bring along.  This year the Buddistick and the magmount will ride along in the Jeep. But for hiking purposes, I think I will end up taking only the EFHW wires that I have pre-cut.  They take the least amount of space and are quick to set up – AND, they are proven, I have gotten decent results with them before, including some European DX last year.

72 de Larry W2LJ
QRP – When you care to send the very least!

Years ago, that was the title of a song by Buster Poindexter.  That title is very apropos for this coming weekend.  Just to give you a little of our flavor – here it is 10:20 PM and it’s still 82F (28C) outside.  When I got to my car to come home from work, the Jeep’s thermometer read 101F (38C). I thought to myself, “Yeah, that’s because the car was sitting in the sun, it will cool down as I move and I’ll get the real reading in a few minutes”.  Ten minutes later, the temperature did indeed drop, all the way down to 100F. One degree!

This weekend is going to be brutal as this is supposed to last right through Monday. It’s a good thing we had the air conditioning fixed last week. At least we’ll be able to sleep in relative comfort. No matter how bad it gets, though, in my mind this is better than 6 inches of snow and 22F outside.  I’ll deal with this any day of the week!

Two cool (pardon the pun) events took place tonight.  First, yours truly, one of the most inept people on the face of the Earth when it comes to figuring out COM ports and such stuff, managed to download the KX3 utility from Elecraft. Not only that; but I got it to work!  I downloaded from the Elecraft server and then uploaded into my KX3, the latest version of firmware. And I discovered that using the KX3 utility, that you can enter a start up banner. So now, when I turn the rig on, where the secondary VFO display normally is, you see “W2LJ’s KX3” for a few seconds before that changes over to the normal VFO display.

Second cool event:

I completed the K3 inventory. Everything was there! Well, just about everything – I am missing three #6 split ring washers.  But I can pick those up (or an equivalent) at a local hardware store. None of the screws were missing.  In fact, there was OVER the amount needed and that does NOT include the extras that can be found in the Elecraft spare hardware bag. The picture above does not do the situation any justice.  When I opened up that big cardboard box, it was jam packed with bags, envelopes, static bags and other things.  By the time I was done, the entire table was covered with Elecraft goodies – you couldn’t even see the table cloth.

I am hoping to start the build tomorrow night after all Saturday’s chores are done.  I am also hoping for a chance to run over to the park on Sunday with the KX3 a battery and some wire,  If I get the opportunity, I will post myself on QRPSPOTS and maybe we’ll run into each other on the air!

By the way, we’re up to 75 Skeeter numbers given out for the NJQRP Skeeter Hunt to be held on Sunday, August 12th,  I’ll be handing out numbers right up to the day before; but don’t be part of the last minute rush! Get yours today by sending an email to [email protected] 

And no, to answer all of you out there who are concerned about FOBB – I have not heard anything new. I have no inside information; and in fact, there may be more of you out there who have better info than I do!

72 de Larry W2J
QRP – When you care to send the very least!