AmateurRadio.com

International Ham Radio News & Opinion

Posts Tagged ‘Elecraft’

A day at the beach…….with HF……it doesn’t get any better!!

June 21st, 2013 |

Author: Mike VE9KK

Busy making contacts

The idea was floated earlier this week about going to the beach on Thursday. The weather looked great I had Thursday and Friday off so the decision was made! There is a nice spot that Julie and I go to all the time called Port Dover on lake Erie. This town is famous for it's Friday the 13th motorcycle gathering. Thousands of bikes head to Port Dover for a massive get together. On most weekends the beach is packed so going during the week we were not expecting huge crowds and hard to find parking. Turned out the crowds were small and I was able to park right at the beach with only a 10 pace walk to the car to get anything we needed. The wheels started to spin in my head on Wednesday evening about making this an HF/beach day. I have the Elecraft KX3 and it's all charged up this time, but I also have my extra battery I purchased. Julie thought it was a great idea as long as HF did not take over the day. So with moderation in mind I packed up the KX3 along with the extra battery. The antenna was going to be my mobile whip antenna with coax out to my rig. The Alexloop would have been nice but not knowing how crowed the beach was I left it at home.

back on the beach

I set up the rig, antenna and the lawn chair just beside Julies car....oh as a side note we had to bring both our cars as Julies relatives are in from England for a few more weeks. Our cars would not fit us and the beach gear........... I drifted a bit back to radio. The antenna was on the back of my car and with the pressing of two buttons on the KX3 the HF adventure began.
I was calling CQ at the 20m QRP watering hole and I first had N0FKC come back to me Piether was just outside Minneapolis I gave him a 559 report but once I gave it back to him the conditions had drastically changed. He was in at the noise floor and I must had been the same to him. He was in the process of sending me 73's. So that QSO did not last long at all.

View from the patio

I then put my call out again and KA3LOC came back to me with a 599 signal. We were able to spend more time in a QSO. Eric was in Kansas and also gave me a 599 report. He was running 5 watts compared to my 3 watts. We said 73's and it was time then for me to pack things in and go back to reading and relaxing. Then it was off to the local watering hole for the famous Lake Erie perch dinner on the patio that looks out over the beach. I was nice I had about a total of 2 hours on the radio and some great beach time.

Strangeness

June 19th, 2013 |

Author: Larry W2LJ

While the rest of the blogosphere and Amateur Radio world seems to be having a spit-feckled nutty about Heathkit zombies, I decided to get on the air tonight (only after replacing the towel rack in the XYL’s bathroom, mind you).

On 40 Meters, I had a pleasant, but rather taxing QSO with Bruce W1CVE from Providence, RI. Summertime conditions were the rule for 40 Meters with lots of band noise, QRM, QRN and QSB. Despite it all, Bruce and I had a pleasant chat. He was 579 here and I received a 559 in return – not terrible.

On 20 Meters, I had a brief QSO with EW1DJ in Belarus. Alex was 599 here, and I received an honest report of 579 in return (not the automatic 599 DX report that you usually get). For this one instance, the haul from NJ to Belarus was far easier than the haul from NJ to RI. Go figure.

A word about last night’s post regarding the tuner and amp for the KX3. In no way did I mean to disparage anyone who has already ordered, or is considering ordering these pieces for their KX3s. If the KX3 is your only radio and you have the funds to afford these, then I am heel clicking, somersault tumbling, high fiving happy for you! I was commenting on my own situation and was not attempting to cast sour grapes upon the Amateur Radio landscape.

73 de Larry W2LJ
QRP – When you care to send the very least!

I don’t think so

June 18th, 2013 |

Author: Larry W2LJ

In my e-mail box was a special announcement from Elecraft. Today they announced they were taking orders for the KXPA100 amplifier for the KX3, and the KXAT100, the auto tuner for the amp.

The amp is $700 and the tuner is another $300.

At this point, I don’t think these are in the cards for me, for a couple of reasons.

1) Price – I just don’t have an extra thousand bucks laying around. Of course, I could always part ways with something, like my K3, but I’m not too crazy with that idea. I bought it soon after my Mom passed, so it holds a lot of sentimental value.

2) Practicality – I like the idea of having two rigs. My K3 and my KX3 are mutual backups. If something were to happen to one, I still have the other. If I were to sell the K3 in order purchase the KXPA100 and the KXAT100, I would no longer have a backup. I also like having a main station rig and a dedicated portable rig.

3) Personal – I need to be happy with what I have and not always be on the lookout for “more”. I am very fortunate to have what I already own, and while it may be less than some, it’s still a lot more than even others. I need to enjoy what I have and get off the “consumer hamster wheel” of always wanting more.

72 de Larry W2LJ
QRP – When you care to send the very least!

20m from the car….and snagged nothing!

June 15th, 2013 |

Author: Mike VE9KK

My portable mobile by the river.

It was another great day here and I wanted to get all the house chores done and get on to some radio stuff! I wanted to get out and about with my KX3 so today I decided to operate from the car with my 20m whip antenna. Not sure how charged up the KX3 battery was I took along with me my new external battery just in case a low battery issue came about. The All Asia contest is on so the bands could be busy with DX and I wanted to be there to make some contacts. I found a nice place in town along the river were I was able to stay in the car as the bugs are very bad at this time of year. The bands were alive with DX, the first station that was booming in was JH4UYB from Japan then came RN3F from Russia, OH2BV from Finland, LY6A from Lithuania and finally UP2L who was 17 years old by the way from Kazakhstan. All GREAT DX but none of which could hear my 5 watts from the portable setup. I then moved on to just

A view down the river

calling CQ at the 20m watering hole. I did get a response from W5ESE from Texas but conditions changed very fast and he was still trying to pull out my call form the mud. The 2 hours went by very fast without really one confirmed contact! It was now time to pack up and head for home and try to make some contacts on the Elecraft K3 this evening.
On a side note.......last night I did make contact with a new DXCC 7Z1HL from Saudi Arabia!

Cosmetic K2 Upgrade

June 10th, 2013 |

Author: Sverre LA3ZA

My Elecraft K2 which is now more than 11 years old (serial #2198) has served me well, even earning me QRP DXCC (100 countries with 5 Watts) some years ago. It is still cosmetically in mint condition, except for that single item which sticks out like a sore thumb: The tuning knob.

This became very clear to me a couple of months ago when LA8OKA’s and my K2 were displayed side by side at our stand at Oslo Maker Faire. His is less than two years old, serial #7224, and they were similar except for the scratches in the faceplate of my tuning knob. If I am allowed to generalize from my knob only, it seems as if the faceplate had poor quality paint and has been replaced by a better quality version over the years.

Anyway I ordered a new one and paid the price which at present is $30.37 plus shipping. The difference is really striking and I feel like I have a new K2 now, well worth the price! The K2 now serves as my second rig, and I think it has many years of good service still to come.

June 9th, 2013 |

Author: Mike VE9KK

My contest screen

Ham radio is very diverse and has something that seems to click with each radio operator. One of my "clicks" is contesting and I also add to it the flavor of QRP (another one of my clicks). I enjoy using my PC in conjunction with ham radio and when it comes to contesting a PC is almost a must have. The program I use for contesting is N1MM logger. It 's a great program and works very well, has great support and I'm not sure of any contests that it does not support. Over time I have added some programs to my contest repertoire. I found that controlling N1MM got me used to using my mouse and that is the way to go when it comes to contesting. I then came across N4PY's rig control program. It's another way to incorporate my mouse to allow me control of my K3 during contests. This program is very well supported and the times I have emailed questions and got a reply within 1/2 hour!! This program will allow you to control most if not all functions of your radio with the click of a mouse. In a contest this is great because you are not going from mouse (N1MM logger) and back to the radio. For me it's more of a smooth type of operation using the mouse. Hold on....my contest hangup gets weirder.....I have a keyboard tray that supports my keyboard,
Begali Contour key and why not VFO control as well!!! Now comes the Flexcontrol VFO knob. This is a USB device that allows you to tune your rig (and more) from where you ask.....well the keyboard tray of VSP manager to the mix. This great little program (that is free to hams) allows all the programs to live happily with each other.

FlexControl knob

coarse! N4PY's programs allows you to interface the Flexcontrol with your rig through his program. I did say the Flexcontrol did more than just tune, it has 4 memory buttons that can be programed through N4PY's program to preform often used radio functions. Also the VFO knob can go from fine tune to three other tuning choices by just clicking the knob! To do this the radio, Flexcontrol knob and N1MM all have to be happy coexisting with each other. To do this I added
You all know how it is when you have had a nice dinner and there is still room for a nice desert......well my nice dinner on my keyboard tray was the Flexcontrol knob, Begali Contour key and the mouse....there is still room for one more item! I added the K1EL USBwinkey which I assembled myself. The N1MM contest program is able to incorporate the Winkeyer in it's program, so when I program the CW messages into the winkeyer they will be used by N1MM when I mouse click on the N1MM macro button. This is great because the Winkeyer is very easy to program and you can save various keying programs into individual files. This way I will have a file for each CW contest and just a mouse click to program N1MM for each CW contest. If all files are stored on my PC and the Winkeyer is set up via the PC and CW is set through N1MM logger then why the heck does the Winkeyer have to be on the tray!!! Well Winkeyer has a nice variable pot control that can vary the CW on the fly. This way for op's who are sending slower or faster CW you can be varied by a simple turn of the Winkeyer knob.

Keyboard tray setup

Finally there are those out there that subscribe to the KISS theory.....Keep it simple stupid......and this is true when you introduce other factors with ham radio. As for me trying and sometime failing is well worth it when in time all comes together and works well.

The Blue solution

May 30th, 2013 |

Author: Mike VE9KK

The last time I was out and about with my KX3 my re-chargeable internal batteries let me down.........actually it was user error as I failed to charge them the evening before. Planing is everything they say so the spur of the moment thought of taking my KX3 to the field did not work out so well for me! The weather forecast has been known to change from rain to sunshine on any given day. To me that is translated as a non KX3 day thats transformed to a perfect KX3 outing day. To avoid my radio let down I went online and ordered a 12 volt portable 9800Ah Li-ion rechargeable battery pack. It has a wall wart for charging and seems to be a nice little unit. Larry W2LJ has the same pack and it seems to be working well for him. This

My Blue solution

way next time when the internal KX3 batteries TRY to let me down......I will plug in the "Blue solution" As a side note Elecraft offers (which I purchased) an internal battery charger called the KXBC3. This way you can load the KX3 with rechargeable batteries and just plug the KX3 into your power supply and have the KX3 charge the batteries on it's internal timer. Unfortunately this unit does not (as of yet.... but I'm hoping) have the ability to trickle charge the internal batteries. This way it's always ready to go! That is the only downfall to the KXBC3 I have found.