Last night saw another running of the winter Stew Perry Topband Challenge.





This contest is unique in that the usual density of activity on the eastern side of the continent does not necessarily provide an advantage ... contest scores are determined by the distances worked and each QSO will have a different point score, depending on its distance. The exchange is a simple one ... grid locators only ... and from these, the point score for each contact is calculated. From my way of thinking, and many others that I have discussed this with, the 'SP' is one of the fairest contests there is, putting everyone, no matter where they are located, on an even footing.

Today's Sun (courtesy: http://sdo.gsfc.nasa.gov/)

Unfortunately, mother nature, in combination with ol-Sol, conspired once again to provide some serious geomagnetic disturbance and conditions were anything but memorable ... the 'K'-index jumped to a stormy '5' right at sunset. I seem to be saying this a lot of late, but the sad fact is that sun has been extremely active and punishingly geoeffective as it winds its way down from a rather unnoteworthy peak. To add more mystery to this already quirky cycle, its downslide would make any 'normal', highly-active cycle, stand proud ... the strong slide down does not seem to match the wimpy low-level peak, observed a few years ago.

From here, operating in the 100-watt category, it was a struggle to work the normally easy single-hop stations, with no signs of the central states for several hours after sunset. Several east coast stations were worked towards midnight for the nice 12-point per QSO scores, but truth be told, almost all contacts were a struggle with many stations needing several repeats just to get the call or grid.


My half-sloper antenna and radial system is located right on the edge of the ocean, looking to the east, and its already low takeoff angle is enhanced with ~ 6db of sea (horizon) gain, making it a poor antenna for anything within the first-hop region ... after that it really seems to comes to life.

At 12:15 a.m., I pulled the plug, ending up with just 97 QSO's and 555 claimed points, way down from normal. Other claimed scores can be viewed on the 3830Scores.com website.

My best DX is usually JA but this time was KH6. The SP is always fun, but better conditions would have really made it a blast ... hopefully next year!
Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

In this episode, Martin M1MRB / W9ICQ is joined by Colin M6BOY to discuss the latest Amateur / Ham Radio news  and this episodes feature is 2016 Amateur / Ham Radio Elmer Kit.

• German Request More 5 MHz power
• Amateur Radio Kids Day 2016
• Irish Spectrum Strategy Consultation
• German Medium Wave AM Switch-off

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

In this episode, Martin M1MRB / W9ICQ is joined by Colin M6BOY to discuss the latest Amateur / Ham Radio news  and this episodes feature is 2016 Amateur / Ham Radio Elmer Kit.

• German Request More 5 MHz power
• Amateur Radio Kids Day 2016
• Irish Spectrum Strategy Consultation
• German Medium Wave AM Switch-off

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

Win4kSuite up and running

I have decided to change up my rig control software to Win4K3 suite I downloaded the trial version and was very impressed. I would had done it sooner but my PC was not up to the grade to properly run Win4K3 software and to be honest it was long over due for a PC upgrade. The PC was upgraded and if your interested that can be viewed here.  I decided to purchase the Win4k3 software (50.00) and change from my long time N4PY's Pegasus Plus rig control program. Carls Pegasus Plus program is very good and the support that Carl offers is excellent but I found the Win4k3 software was more catered to my Elecraft rigs. Once installed you have full rig control including the Elecraft P3, KPA500 amp and KAT500 tuner and the Sub receiver if you have these installed. (I did have the sub but sold it and I look back on that with regret)  I have the K3, P3 and KX3. The software installation has very good documentation and there are videos as well. Im the type of person who picks up much more from videos than written instructions. With the Win4K3 suite I was able to have PC control of all my K3 functions that some other software programs did not offer, such functions as spot, test, equalizer setup, terminal program, cw decode, Auto tuner and APF just to name a few. I also have the Elecraft P3 and with my PC upgrade I added a VGA capture board and since my P3 already had the SVGA board installed I N1MM contest software and Log40M. (More about Log40M in another post…. great software)

P3 on the monitor

was able to add point and click with my mouse to my P3 and this is great during contests. The SVGA board also allows me to view my P3 on a second monitor and mine being a 22" LCD monitor the P3 looks great on it. This software also has the availability to set up virtual ports. Now in the past just hearing "setting up virtual ports" made me nervous I really never had to much luck setting them up and getting them to work! With Win4K3 suite VA2SFQ makes it almost plug and play with both very detailed easy to follow steps and software that makes it painless…..and best of all IT WORKS!! The 3rd party software I set up to "play" with Win4K3 so far are If you have either the Elecraft k3 or KX3 (I have not setup my KX3 rig with the Win4k3 yet) and you are looking at PC controlled software then consider downloading Tom's trial version and give it a go!


Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

Amateur Radio Weekly is curated by Cale Mooth K4HCK. Sign up free to receive ham radio's most relevant news, projects, technology and events by e-mail each week at http://www.hamweekly.com.

Merry Christmas!


Not wishing to contend with an evening of dire XYL style Christmas TV (Strictly Come Dancing, Call the Midwife and Downton Abbey) I escaped into the shack and decided to repair my Vectronics VC300DLP Antenna Tuner. I got this ATU second hand last year and while it has been serviceable it had become temperamental of late. The units rotary inductor switch had become stiff and suddenly I was unable to match the OCFD on some bands so it had clearly broken.

I had a 12-position switch (rated at 5A) and knob, originally sourced for an abandoned project and hoped it would be suitable. The existing switch knob on the ATU wasn't an original, I'd assumed it had replaced one lost or broken. When I removed the cover it was clear that the whole switch had already been changed at sometime.


I also noticed a prominent burn mark inside the inductor coil, caused by a clear break in the insulation of the wire which was resting on the grounded bottom plate.


I know the previous owner of the ATU has a 300W RM BLA-350 linear amplifier, whereas I only normally operate around 30W maximum at my QTH, so not sure how much of this arcing I had caused but it needed sorting! A little over half an hour with the soldering iron and I had replaced the switch and slipped some heat shrink over the broken insulation and re-soldered the wire, lifting it off the ground plate.


The ATU seems to work well, now fitted with a new knob (just missing a cap at the moment) the switch turns nicely. I also cleaned up the SO-239 connectors on the back as they were tarnished and oxidised. I used a small bit of contact cleaner on some cotton buds to clean up the threads and the centre pins, removing a surprising amount of crud. The patch and antenna leads now screws on much better.


With the Mother--in-law staying with us over the festive period I suspect I may be in the shack quite a bit, I have plenty of jobs and half finished projects to keep me busy!
Andrew Garratt, MØNRD, is a regular contributor to AmateurRadio.com and writes from East Midlands, England. Contact him at [email protected].

Merry Christmas!


Not wishing to contend with an evening of dire XYL style Christmas TV (Strictly Come Dancing, Call the Midwife and Downton Abbey) I escaped into the shack and decided to repair my Vectronics VC300DLP Antenna Tuner. I got this ATU second hand last year and while it has been serviceable it had become temperamental of late. The units rotary inductor switch had become stiff and suddenly I was unable to match the OCFD on some bands so it had clearly broken.

I had a 12-position switch (rated at 5A) and knob, originally sourced for an abandoned project and hoped it would be suitable. The existing switch knob on the ATU wasn't an original, I'd assumed it had replaced one lost or broken. When I removed the cover it was clear that the whole switch had already been changed at sometime.


I also noticed a prominent burn mark inside the inductor coil, caused by a clear break in the insulation of the wire which was resting on the grounded bottom plate.


I know the previous owner of the ATU has a 300W RM BLA-350 linear amplifier, whereas I only normally operate around 30W maximum at my QTH, so not sure how much of this arcing I had caused but it needed sorting! A little over half an hour with the soldering iron and I had replaced the switch and slipped some heat shrink over the broken insulation and re-soldered the wire, lifting it off the ground plate.


The ATU seems to work well, now fitted with a new knob (just missing a cap at the moment) the switch turns nicely. I also cleaned up the SO-239 connectors on the back as they were tarnished and oxidised. I used a small bit of contact cleaner on some cotton buds to clean up the threads and the centre pins, removing a surprising amount of crud. The patch and antenna leads now screws on much better.


With the Mother--in-law staying with us over the festive period I suspect I may be in the shack quite a bit, I have plenty of jobs and half finished projects to keep me busy!
Andrew Garratt, MØNRD, is a regular contributor to AmateurRadio.com and writes from East Midlands, England. Contact him at [email protected].