AmateurRadio.com

From John Harper AE5X’s blog I have discovered that Ten Tec will be re-branding the Chinese HB-1A QRP CW transceiver. The Ten Tec versions aren’t exactly the same – they will be selling two versions, one covering 40 and 30 metres and one covering 30 and 20 metres whereas the original covers 40, 30 and 20. This may have something to do with meeting FCC spurious emissions specifications.

As it happens, my HB-1A is on eBay at this very moment. Not that there is anything wrong with it, just that it doesn’t do anything that my FT-817 can’t do and I’ve spent quite a lot on new radios recently so it seems right to dispose of some of the ones that aren’t being used.

But its performance wasn’t exactly spectacular. It’s a bit sad to see the company that made and discontinued the Argonaut 516 HF QRP rig and matching 526 6’n’2 metre rig offering such a basic radio as its only QRP product.

I’d love a Ten Tec 516 / 526 pair, so if anyone has one in mint condition that they’d like to sell or trade for an Elecraft K3/100 drop me an email.

Computers and radio really don’t mix. I was trying to connect the FT-817 to the shack computer. I plugged the USB cables into the back of the PC, then as I lifted the cables vertical to feed them behind the shelf unit I heard the noise level on 2 metres come up quite clearly. I could probably reduce the noise using clip-on ferrites but any more noise than I already have is unwelcome. I think I might give up the computer altogether and go back to paper logging!

I also proved today that it isn’t possible to work satellites with indoor antennas. Yesterday I tried receiving AO-51 with the 3/4 wave vertical I made, but I got a readable signal for only a few seconds. Today I tried the 6 element Yagi I made a few weeks ago which received signals off the Moon when used outdoors. Pointing it at the satellite from inside the shack I again heard only a few seconds of signal from the satellite. I think there is just too much attenuation at 70cm to use indoor antennas, so satellite operation is out of the question.

I could probably combine the 6-element 70cm and the Moxon 2m antenna to make a portable hand held antenna for satellite use. But whilst it would be an interesting challenge to make a satellite contact using the FT-817 and a hand held antenna out of doors I had really hoped to be able to do it from inside the shack.

I’m not sure that I’ve shared this on the blog, but I’ve long known that the reason that my “troublesome” 930 burns up PA drivers is a low-frequency oscillation.  This mechanism was also mentioned by Leeson in his comprehensive list of 930 upgrades and repairs.  At first, I thought that the 28-volt power supply’s filter capacitors might be the culprit—insufficient ripple-suppression.  After all, the oscillation sounds like it has a 60-Hz component (I’ve never tried to measure this because I’m concerned about blowing up more transistors).  I finally completed the capacitor replacement last night, realigned the power supply voltage and PA bias levels…and the oscillation is still there, just as I increase the drive past the point where I get 50 watts out.

There is a good Helge Granberg article in the September/October 1980 issue of RF Design titled “Good RF Construction Practices and Techniques.”  I would like to get a copy of the original article because Motorola, in their infinite wisdom, reprinted the article as AR164 but neglected to include the list of references.  Granberg devotes an entire section of the article to instabilities, a full of half of that section to low-frequency instabilities.  This is the area I will focus on first:

Causes for the low frequency instability are usually inadequate collector DC feed bypassing or an extremely poor ground in that area.  Two or three RF chokes together with various values of bypass capacitors from 1000 pF to several uF may be required in the DC line to stabilize the circuit.  (See examples in Reference 1.)

Ah, Reference 1, where (who) art thou?

If I ever get to the bottom of this problem, there should be a useful body of work and notes to prevent this from happening repeatedly to others.

I received a response from the web host support desk about the problem that is causing the WebProp update scripts to fail to access the WWV solar data. The reply was:

There is nothing we can do to fix this it’s a configuration error on their end with their dns. This is occurring because of invalid dnssec configurations at noaa.gov. We will not bypass the dnssec configurations implemented within .gov. The only way to have this corrected is by the dns administrators at noaa.gov signing their zones.

20-May-2010 15:26:00.099 validating @0x827fff000: swpc.noaa.gov SOA: got insecure response; parent indicates it should be secure
20-May-2010 15:26:00.116 validating @0x80284f000: swpc.noaa.gov SOA: got insecure response; parent indicates it should be secure
20-May-2010 15:26:00.159 validating @0xadb055000: swpc.noaa.gov SOA: got insecure response; parent indicates it should be secure
20-May-2010 15:26:00.204 validating @0xad9af8000: www.swpc.noaa.gov A: bad cache hit (www.swpc.noaa.gov/DS)

This is way over my head, but I think they are saying this is due to a problem at NOAA’s end not mine.

I will give it a couple more days, but if the problem doesn’t go away then I will have to remove WebProp. I know this will be a pain for those who have included it in their websites but there is nothing I can do about it.

The WebProp HF propagation indicator has not been updated since midday today. Since that time the update script has failed with an error saying that it is unable to resolve the host www.swpc.noaa.gov where the WWV solar weather reports come from. Since it can’t get the data, it can’t update WebProp.

I have opened a support ticket with the web host which has replied that there is a “problem with the server DNS.” Hopefully the problem will be resolved shortly.

I have been listening when time permits to see whether I can hear – and perhaps even work through – amateur satellites with my attic antennas. Today I caught a couple of passes of Amsat Oscar 7 operating in Mode B.

Oscar 7 is the first and only satellite I have ever worked through. It was launched in 1974 and I used it during the summer of 1975 when I was home from university. In those days I used Oscar 7’s Mode A (2m up, 10m down) running 50W from an Icom IC201 with an amplifier to a 5 element Jaybeam and receiving using some kind of wire antenna and a Yaesu FRG-7 receiver.

Oscar 7 is more than 35 years old and the fact that it can be used in 2010 is interesting. The satellite failed in 1981 after all the batteries failed short-circuit and that was the last anyone expected to hear of it. But in 2002 its beacon signal was heard once again after one of the batteries went open-circuit allowing the full power from the satellite’s solar panels to be used to run the transponders. Jan King, W3GEY, who built Oscar 7 in his garage all those years ago, wrote about his feelings on hearing his ‘baby’ again – it was clearly an emotional experience.

The satellite now comes on when it is in sunlight and goes off when it is in eclipse. It is pot luck which of its modes it uses when it comes on, but it mostly appears to be Mode B, the downlink of which can be heard on 145.950MHz USB plus or minus 20kHz. You can receive it quite well using a good 2m vertical – in fact I hear it better on my Slim Jim than I do on the SuperMoxon due to the fact that the latter is very narrow band and tuned to the low end of the 2m band.

You would hear the Mode A downlink on 29.450MHz plus or minus 50KHz. (Both transponders are linear and can support multiple contacts at the same time within the bandwidth, unlike an FM repeater.)

I am finding it difficult to find out which of the many amateur satellites now in orbit are usable for communication and when they are actually available. Many of the websites giving information about how to use satellites are well out of date and give details of satellites that are no longer operational. To add to the confusion some sites use names like “Hamsat” or “Echo” while others use the Oscar designation. So you may find the links below useful if you would like to try listening for Oscar 7.

N2YO has an excellent site for all satellite enthusiasts which provides real time Oscar 7 satellite tracking and allows you to generate predictions for future passes. It’s worth logging in to the site so it can remember your location co-ordinates. You should also tick the box “Check to show ALL passes (visible and not visible)” – confusingly this refers to when the satellite is visible to the naked eye, not when it is above the radio horizon.

The Oscar Satellite Status Page lets people enter reports of satellites heard so you can see which ones are operational and get an idea of which mode Oscar 7 is operating in at the moment. Finally Planet Emily has a lot of information about Oscar 7 including a log where people can record contacts made through this antique piece of space hardware.

It’s a couple of days since the end of the 2010 Dayton Hamvention. Cheryl and I would like to send out a special thank you to everyone who stopped by our booth while we were there. We met a lot of interesting folks and had a great many thought provoking conversations. It was our first time so we didn’t know we’d be out in the sticks, so to speak, but we still had a lot of traffic and a lot of fun.

Now that I’m home and most of the work that piled up on me while I was away has been tackled, I got the podcast we recorded before the event finished and here it is.  There’s no Dayton content this time around. That will come next time. The drawing for the Alinco radio and the other Linux in the Ham Shack swag will happen on Friday and we’ll announce all the winners in the next show and on the Web site so stay tuned for that. In the meantime, enjoy some interesting feedback from listeners and some insight into Richard’s latest mobile rig install. Keep the feedback coming, visit our Printfection and Cafe Press stores and pick up an item or two, and get ready for next year in Dayton. Linux in the Ham Shack will be back.

73 de The LHS Guys