AmateurRadio.com

After last week’s plea for antenna ideas for my antenna restricted condo, I received a good number of comments both on and off blog. Thanks for those… great food for thought. That is why I enjoy our QRP community. We don’t hesitate to share ideas with one another.

This morning as I took my daily walk around the lake, I met our condo association president. He graciously is allowing me to sink a pipe that will serve as a base to set up my Jackite poles in the backyard. I will be able to pop a cap on the top and keep the dirt and water out and just slide my fiberglass poles into the mount and be on the air in no time. YAHOO… that is a pretty good solution for now.

C Pole Antenna by W0VLZ

But being the antenna tweak that I am, I continue to look for the best alternatives I can find. I’ve started to put together the parts for the C Pole antenna that Niel W0VLZ pointed out to me. He has a fine site with lots of good QRP info too.

So, do you have another idea that can top that one? Or maybe you have a thought for what kind of vertical setup I might use with the new mount?

I’m standing by for my next project assignment.

72,

Kelly K4UPG

We purchased our condo before I got back into ham radio. Like most in Orlando, we have antenna restrictions. I can put up portable or temporary antennas but cannot mount anything to the building permanently. I’d love to be able to get on the air without all the hassles of dragging gear to the porch, setting up an antenna and then tearing it all down again. It takes so much time to setup and tear down that it turns a few minutes of operating into a long process.

Here’s the layout I have to work with at the QTH…

The front yard view… I am next door down from the blue car

Preferred antenna site is the backyard

The buildings run north and south and these photos are shot facing due north. My condo is ground floor, second from the south end of the building. Yes, that is a big electrical transformer box and a major underground feeder line runs to it from the north.

I’ve used my Buddistick with some success but it doesn’t like being so close to the buildings and the swr is higher than when it is out in the open. I also have run a doublet inverted vee fed with twinlead but the north south orientation is not very favorable from my Florida QTH and sends most of my rf into the two buildings. My W3EDP works fairly well as an inverted L with my 20′ Jackite pole and I’ve used end fed halfwaves as slopers and inverted vees but again the directivity is not favorably oriented. I have a 3 foot magnetic loop propped against the wall but it is not working as well as I’d like yet. (i.e. the outdoor antennas work LOTS better so far)

Thought I’d ask ya’ll for some input.

Any outrageous ideas or thoughts for  me? Send me a comment and let me know.

Thanks in advance for your thoughts.

Many work responsibilities have kept me off the air more than I’d like lately.

But we did manage to break away for a few days with family in Tennessee over Memorial Day. It was great to have an opportunity to get together with Chuck, AF4O the Hillybilly Bear and fellow Polar Bear QRP group member. We had an opportunity to work a bit of QRP portable in the Chickasaw State Forest in West Tennessee. It is a very natural and beautiful location and Chuck took me to his special spot in a very old and interesting cemetary set deep in the very tall hickory tree forest. Wow! I believe the latest date on the grave markers was 1927 and there were many from the early and mid 1800′s. It is a lovely and isolated spot.

K4UPG running a 30m EFHW sloper from the edge of the forest cemetary

Chuck said to bring along a screen shelter and I sure was glad I did! This was also a great spot for deer flies, hornets and other interesting biting bugs!

He had a nice setup and was running a random wire on 20m which he launched by throwing an antique glass insulator from an old telephone pole over a tree branch. He has a better arm than I do… think that heavy insulator would have broken my arm!

Back at the in-laws home in Jackson, I had some time to operate deck portable and was ably assisted by my niece Chloe. Conditions were horrible, but it was fun to be outside and hearing some sweet dits and dahs for a bit.

Now I am gearing up for the next outing of the Central Florida QRP group. The weather is HOT and the summer thunderstorms are back, but life and radio must go on… cu on the air!

72,

K4UPG

AF40 downs a Mountain Dew and doesn't miss a character of CW

Chloe gives me advice on copying cw through the QRN

A fitting end to this season of PBMME … Saturday the weather was finally decent here in Orlando and with 80F temperature and lots of sun, I certainly earned my red neck for the season! I set up my portable station near the tall pine trees in our neighborhood park on Lake Fredrica. A few curious neighbors came by to find out what the crazy guy with the wires in the tree was doing!

I am really liking the latest antenna launching combo shown in the photo below. I have been using a slingshot taped to a shelf bracket and equipped with a spincast reel, but have been considering other alternatives. The monofilament fishing line is prone to wind knots and tangles and does not always slip through the branches as well as I’d like. I found an old post by Russ Carpenter, AA7QU, a co-founder of Adventure Radio Society, which described using an archery reel and super slick braided line. Sure is nice to learn from those that have gone before! The bright yellow line is very easy to see though very thin, 3x stronger than monofilament and flies through both air and branches with ease! KEEPER!  Think I will do away with the spincast reel and save it for the grandkids!

Antenna Launching options

Here's my site for the event

Great trees for antenna wire hanging!

If you look closely, you can see the 30m half wave going up to the tree on the left. Nearly vertical for 46 feet and is spooled on a Coleman Camping clothes line and used with a 3 ft counterpoise.

To the right is my 20ft Jackite pole and a W3EDP 84 ft antenna with a 17 ft parallel feed with 3/16 inch PET pipe spacers about every 2.5 ft. it tunes 80-15m with my BLT+ tuner.

The Polar Bear QRP Group is a great bunch of guys… (no yl’s or xyl’s that I’ve heard yet) and our monthly outings are something I look forward to each month. The Yahoo Group is a good source of information and laughs as we swap stories and share our adventures. If you like QRP and portable operation, this is the group to join.