AmateurRadio.com

I had some spare time today  and was able to get on the radio! Over the past month or so it has been lots of work and no time to play radio. Today while on 20m CW  I was able to snag HA7GN from Hungary, IQ0PG from Italy I was given special report number of UN90ARI1.  According to their site this qualifies me for there ARI 90 years award. The last contact of the day was IO0MDC again from Italy and this call was in celebration of 20 years for the Mediterraneo DX club. I was thrilled with
these short contacts and I really was only on for about 20 min's. On a side note.........I have posted in the past that I am the proud owner of an Elecraft K-pod. This thing works great and is a great asset to the shack. It has 8 programmable push buttons, at my age I loose track of what is on what button! I came up with an idea of adding some magnetic strips with the naming of each of the buttons. Since they are magnetic I can remove them when the button macro has been changed or rearrange them if need be.

I had some spare time today  and was able to get on the radio! Over the past month or so it has been lots of work and no time to play radio. Today while on 20m CW  I was able to snag HA7GN from Hungary, IQ0PG from Italy I was given special report number of UN90ARI1.  According to their site this qualifies me for there ARI 90 years award. The last contact of the day was IO0MDC again from Italy and this call was in celebration of 20 years for the Mediterraneo DX club. I was thrilled with
these short contacts and I really was only on for about 20 min's. On a side note.........I have posted in the past that I am the proud owner of an Elecraft K-pod. This thing works great and is a great asset to the shack. It has 8 programmable push buttons, at my age I loose track of what is on what button! I came up with an idea of adding some magnetic strips with the naming of each of the buttons. Since they are magnetic I can remove them when the button macro has been changed or rearrange them if need be.

When I first opened the box I noticed it was packed very well and as I held the K-Pod for the first time I noticed it had some weight to it. The K-Pod is built very solid and would not move around on the radio desk as you used it. There is a tilt stand that places the K-Pod at a very nice operating angle, this stand can be removed if you would rather have the K-Pod sit flat on your desk. The VFO is very smooth and the user is able to adjust the drag if need be but I was very happy with the VFO right out of the box. There are 8 buttons on the K-Pod that can be programmed with macros, each button has a tap and hold function you therefore have 16 macros. Macros are a great way to have a one button push (or hold) to control a commonly used button on the K3. Also Macros can be used to preform a multi task function. For example I have programmed a CW Split macro that puts the K3 in CW mode, sets VFO A and B to the same frequency, moves VFO B up 2 kHz, sets the filter to 400 Hz, clear both the RIT and XIT and locks VFO A on frequency. All this is done with the push of one button. The instruction manual gives you many Macros to choose from. You can program your own and try them out using the K3 utility program on your PC. On Elecraft's website you can download free of charge their programers reference to learn more about macros and programming them.
There is a rocker switch that will allow you to smoothly switch from VFO A (LED D1 lights up) to B (LED D2 lights up) and then to RIT/RXT (LED D3 lights up) adjustments. The manual says that LED4 is user programable and you can actually control the on/off function of D1, D2 and D3 as well.
On the top of the K-Pod there are 4 connection ports:

1.  Auxiliary outputs that the manual says can be used for an external antenna switch, amplifier and so on.
2. DATA connector is used to connect an RJ12 cable (supplied) to the K3. 
3. USB connector (USB cable is supplied) is used to interface the K-Pod with your PC for firmware updates and for what Elecraft calls "future" PC control. 
4. Power connector (cable supplies) can be used to supply the needed DC to the K-Pod and I say "can be used" because via a simple mod
   (parts supplied) to the K3 and K3S  you can power the K-Pod via the DATA cable.
   

When I first opened the box I noticed it was packed very well and as I held the K-Pod for the first time I noticed it had some weight to it. The K-Pod is built very solid and would not move around on the radio desk as you used it. There is a tilt stand that places the K-Pod at a very nice operating angle, this stand can be removed if you would rather have the K-Pod sit flat on your desk. The VFO is very smooth and the user is able to adjust the drag if need be but I was very happy with the VFO right out of the box. There are 8 buttons on the K-Pod that can be programmed with macros, each button has a tap and hold function you therefore have 16 macros. Macros are a great way to have a one button push (or hold) to control a commonly used button on the K3. Also Macros can be used to preform a multi task function. For example I have programmed a CW Split macro that puts the K3 in CW mode, sets VFO A and B to the same frequency, moves VFO B up 2 kHz, sets the filter to 400 Hz, clear both the RIT and XIT and locks VFO A on frequency. All this is done with the push of one button. The instruction manual gives you many Macros to choose from. You can program your own and try them out using the K3 utility program on your PC. On Elecraft's website you can download free of charge their programers reference to learn more about macros and programming them.
There is a rocker switch that will allow you to smoothly switch from VFO A (LED D1 lights up) to B (LED D2 lights up) and then to RIT/RXT (LED D3 lights up) adjustments. The manual says that LED4 is user programable and you can actually control the on/off function of D1, D2 and D3 as well.
On the top of the K-Pod there are 4 connection ports:

1.  Auxiliary outputs that the manual says can be used for an external antenna switch, amplifier and so on.
2. DATA connector is used to connect an RJ12 cable (supplied) to the K3. 
3. USB connector (USB cable is supplied) is used to interface the K-Pod with your PC for firmware updates and for what Elecraft calls "future" PC control. 
4. Power connector (cable supplies) can be used to supply the needed DC to the K-Pod and I say "can be used" because via a simple mod
   (parts supplied) to the K3 and K3S  you can power the K-Pod via the DATA cable.
   

It was a nice surprise that my wife purchased the Elecraft K-Pod for me for Christmas. I did get it a bit early as she wanted to make sure it was here in time and no delivery issues arose due to the busy season. The K-Pod is a nice addition to my Elecraft lineup. It's an external VFO that can control both VFO A-B and RIT  via a selector switch . It also has buttons 8 (the "F" buttons) that you can program macros into. There is actually 16 macros that can be programed as each button can hold 2 macro commands (tap or 2 sec hold) The macros can be programmed using the Elecraft utility program on your PC.

It was a nice surprise that my wife purchased the Elecraft K-Pod for me for Christmas. I did get it a bit early as she wanted to make sure it was here in time and no delivery issues arose due to the busy season. The K-Pod is a nice addition to my Elecraft lineup. It's an external VFO that can control both VFO A-B and RIT  via a selector switch . It also has buttons 8 (the "F" buttons) that you can program macros into. There is actually 16 macros that can be programed as each button can hold 2 macro commands (tap or 2 sec hold) The macros can be programmed using the Elecraft utility program on your PC.

Hunting for that one contact

In Canada it's the Thanksgiving long weekend and I thought I would add Friday as a vacation day to make it an extra long weekend. The weather has been great all week very summer like and far from fall like. I decided to take advantage of this fine weather and get outdoors with ham radio! This time it was going to be our local park with my car, so instead of the Endfed antenna My plan was to warm  up the mono band HF whips. Apon arrival in the park I check with the website "band conditions" and it was showing all green on 30m. I thought "what the heck" I setup and the band was dead! I checked with band conditions again and low and behold the band was now deep on the red. It was off to the standby band.......20m. Going up and down the band I did find it quite but with the hurricane riding up the Eastern U.S. , it's Friday and lots are working and then the band conditions not idea the slow band made sence. I came across a station calling CQ at 14.041 followed by "up". Hmmm I thought....dxpedition or rare call. I engaged the dual watch on the KX3 and I listened for a bit and found there was no pile up in fact there was no one calling him! The call was AN400M that to me seemed like a special event station but at this point I was not sure from where? I set my KX3 for the common split of 2K and threw my call at 5 watts out there. He came right back to me with the standard 599 to which I replied the same adding TU and 73.  From there I was just spinning the VFO around 20m and really did not find much. I did come across 2 other stations signing AN400G and AN400I and that convinced me I contacted a special event station. I tried calling these other station but was not able to make the contact. It was then time to pack it up as there was a Blue Jays game to watch at 1pm today. While at the local watering hole waiting for the Blue Jays game to start I went on   QRZ.COM to find out it was a special event station out of Spain. They were offering a silver, gold and platinum awards but I was not able to get on their website it was not loading so I was not able to get anymore info.