AmateurRadio.com

Iphone meets truck

To begin this is a post that has NOTHING to do with ham radio!  Getting that out of the way here we go……. It was a normal day at work and things seemed to be going just fine. We had our job given to use and it was not an outside job. That was great considering it was -20C and with the windchill -30C or more. So being indoors was a bonus, the idea was to pickup some coffee and head to our location. Once at our work site and in a nice warm building I noticed my Iphone was not clipped to my inside pocket! The first thing that came to mind was I left it at the coffee shop where I had it out checking email. Going back out to our truck my partner greeted me with an apology and showed me my Iphone…….it had been run over by our truck!!! It seems my 650.00 Iphone fell out of my pocket lined itself up perfectly with the trucks real

Otterbox defender case

tandem wheels and was run over! The phone was in a carry case called the  Otterbox Defender (don't work for the place or do they throw any money my way) When buying the case I was told it protects the phone in almost all situations.  This sure was a test and when I was given the phone it sure did look like it failed BUT I am thrilled to say the phone once removed from the Otterbox was in perfect shape and I mean not even a scratch. For those of you out there who have a smart phone ( not just Iphone) it sure is worth investing in a case (like the Otterbox) to save your investment from a potential disaster.
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

Its finally arrived. My Lionel J-38 Morse key from the world war 2 era.

I found the key on Ebay at a fairly reasonable price but because the auction ended in the middle of the night I decided to set a stupidly high bidding amount so I cold hopefully win the auction.

In the end I really didn’t need to bother the price never increased at the end of the auction so I won the key for $61 and $42 for shipping. So not cheap, but the condition of the key really did warrant the price.

It had been stuck in customs for 3 weeks in the UK until I got the bill from UK Customs asking for yet more money due to a calculation error on the VAT oh and this letter will cost you £8. So another £20.41 was spent unlocking the key from the customs.

Anyway. Its here now.  After a very long and quite awful day of work I decided to break out the Brasso and have a go at cleaning the key. I did learn 1 thing about stripping these things down, and that is to keep the left / right parts of the key separate. That proved really useful advice and everything went back exactly in the same place with no fuss.

These keys are lovely to use. Thus far I haven’t plugged it into a radio (that happens this weekend) but just getting the gap spacing, feel and tension right really makes this key a true pleasure to get your hands on.

The first portable outing with this key will be with my newly constructed FOXX3 transceiver. I’m really looking forward to sitting outside and using the key to talk to the world. Albeit slowly and quite quietly. But that’s some of the joy or going out portable.

I did make a small video of the before and after the cleaning processes, I think you will agree the key looks a lot better.

Dan Trudgian, MØTGN, is a regular contributor to AmateurRadio.com and writes from Wiltshire, England. He's a radio nut, IT guru, general good guy and an all round good egg. Contact him him here.

The fire crackers have been lit and the red envelopes handed out: Welcome to the year of the horse. Listen up for some extra activity from east Asia where we all celebrate the beginning of a new lunar year. Gongxi Facai to all of you.

73 de Hans

Hans "Fong" van den Boogert, BX2ABT, is a regular contributor to AmateurRadio.com and writes from Taiwan. Contact him at [email protected].

Hey, folks. It’s time for another episode of your favorite podcast about Linux and ham radio! In this episode, your fine feathered co-hosts kind of get their act together, report on news of interest, the new version of Shackbox and a bunch of other open source-y and ham radio-y topics. Hope you’re all having a great start to 2014, and we look forward to seeing you at Hamvention this year. Don’t forget about our Indiegogo campaign and our Raspberry Pi contest, ending soon!

73 de The LHS Guys

Russ Woodman, K5TUX, co-hosts the Linux in the Ham Shack podcast which is available for download in both MP3 and OGG audio format. Contact him at [email protected].

The annual Freeze Your Butt Off contest, which is sponsored by the Arizona ScQRPions is this Saturday.  QRPers are very familiar with this Wintertime outdoor QRP operating event.  The lower the temperature at your operating position, the higher your multiplier, and hence, the higher your score. Your reward for braving the outdoors during the coldness and enduring the misery.

For the last three weeks in New Jersey, I think it has gone above the freezing mark of 32F (0C), maybe once. We have been in the deep freeze for a while now. So what’s the forecast for FYBO day?  Rain and 45F (7C).  Compared to the last three weeks, it’s going to feel like Springtime!  Of course, there’s no multiplier given for enduring wet, sloppy conditions.  So if it’s pouring, I guess I’ll give it a go from indoors, and save my KX3 from making like a duck.

I guess I should keep my mouth shut and not complain, but couldn’t the thaw come the day AFTER the FYBO Sprint?  I’m just a giver of points, but it would be nice to have the bigger multiplier so I could at least halfway compete with the Big Boys!  😉

I took the plunge and ordered the Begali Simplex Mono tonight with the palladium base, and the gold contacts (30 Euros extra).  I did not get the key engraved with my callsign. I was tempted, but I wanted to keep the price down as much as I could.  I figured that going with the gold contacts was the better option for more reliable keying.  Function over form, I guess. I am really excited now and am looking forward to finally having a Begali key.  This is something I have wanted for a long time, but could never bring myself to actually purchase until now.

72 de Larry W2LJ
QRP- When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

So far this week I have learnt that aligning parts in Google Sketchup isn’t as easy as it is in something like Solidworks. Still for a freebie programme I’m not going to complain.

Progress on the rotator project is slow, mainly because of the usual lack of time. But at least the idea is cemented in my head and now its just a case of doing the mechanical design and then hooking everything up. Below is a rough draft of the proposed Az / El arrangement for the clankies amongst us. I’ll complete the design either myself in a huge amount of hours or, more likely ask one of the CAD jockeys at work to fix it in a matter of seconds.

With this arrangement it should not be complex to either fabricate, buy or 3D print parts to suit. The latter is a preference as then the model can then be used by anyone to get parts made either as laser cut solids or 3D prints.

The main parts will be 2 off nema 17 steppers, gears from actobotics (This may need to be adjusted to slow the steppers down sufficiently) and that nice radio artisan / K3NG chaps code with Anthony, M0UPU’s board.

Onwards and upwards

Alex Hill, G7KSE, is a regular contributor to AmateurRadio.com and writes from Cumbria, UK. Contact him at [email protected].