In this episode, Martin M1MRB / W9ICQ is joined by Leslie Butterfield G0CIB, Matthew Nassau M0NJX, Andy Mace 2E0IBF and Edmund Spicer M0MNG to discuss the latest Amateur / Ham Radio news. Colin M6BOY rounds up the news in brief, and this episodes feature is an interview with Dan Romanchik KB6NU regarding one day licencing courses.

• Realtime Band Conditions Website
• Australian Radio Ham Celebrates 105 years
• ARRL Lodges Glow Light Complaint
• Global Wind Pattern Indicator
• Retirement of RSGB General Manager
• No 60m Operation Possible in VK
• Amateur Radio Club Train School Pupils
• RSGB Contest Committee Changes

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

In this episode, Martin M1MRB / W9ICQ is joined by Leslie Butterfield G0CIB, Matthew Nassau M0NJX, Andy Mace 2E0IBF and Edmund Spicer M0MNG to discuss the latest Amateur / Ham Radio news. Colin M6BOY rounds up the news in brief, and this episodes feature is an interview with Dan Romanchik KB6NU regarding one day licencing courses.

• Realtime Band Conditions Website
• Australian Radio Ham Celebrates 105 years
• ARRL Lodges Glow Light Complaint
• Global Wind Pattern Indicator
• Retirement of RSGB General Manager
• No 60m Operation Possible in VK
• Amateur Radio Club Train School Pupils
• RSGB Contest Committee Changes

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

This Saturday me and my friend Stan UA3LMR (also RD2A) tried to work as pedestrian mobile (/PM) for the first time. We took my FT-817nd (running 5 W output power) and his AlexLoop Walkham antenna, and walked to the park near Moscow river.

Despite cold and windy weather of minus 16C, we had luck to make 11 QSOs with 6 DXCC countries (UA, UA9, G, F, I, OE) during an hour and a half. We used SSB QRP frequency on the 20-meter band (14285 kHz), hf-pack frequency on the 17-meter-band (18157.5 kHz), and one very popular among ex-USSR HAMs frequency for mobile and portable operations on the 40-meter-band, i.e. 7175 kHz.

Peter Dabizha, R2ABT, is a special contributor to AmateurRadio.com and writes from Moscow, Russia. Contact him [email protected].

If, like me you have an rtl dongle, there is another ‘thing’ you can do with them that I bet you never knew. Ok you did but I’ll bet all of you didn’t know. Its called OpenWebRX

You can also arm yourself with one of those old netbooks you’ve got loafing about in the corner and put it to use into the bargain.

To tell the truth I’d not heard about it until Daniel, 2E0DNX mentioned something in passing as I was driving him back from the club night last Monday. I can’t remember what started it but we got onto the subject of putting receivers on the web a la WebSDR and the well known Hack Green SDR. This time, as we are both cheapskates, it was around the use of the cheapo dongles.

So, after downloading a copy of Lubuntu (A lightweight ubuntu distro) I installed it onto an old netbook. I thought I followed the instructions on the website and but I hadn’t and after a false start with some rubbish spelling had a receiver running on the local host. I did get some pretty speedy support from the developer though who helped to narrow down my incompetence.

Getting it on line is a little more complicated and needs a bit of fettling. In order to get it listed on the site it needs a web presence. To get that you can pay for it and host it or you can be a cheapskate and use a service like N0-IP.  Guess which route I went? They provide a web address that you can use and some really handy instructions for linux installations, if, like me, its not a natural environment to work in but you can largely follow instructions.

After all instructions followed correctly (there are no spelling mistakes in your config file ) then the last thing to do is make sure your router lets the traffic through (port forwarding). This can be a pain if you’re on BT like me and can lead to no end of frustration that was eventually fixed with a new, non BT router. I’ve got my head round this and will now look to set up a more permanent installation, perhaps with a RPi2 if its got the right mojo.

All in all you’ve got to hand it to people who set out these environments as they are becoming a great way of distributing amateur radio to a wider audience. Thanks Andras, HA7ILM and well done!

Alex Hill, G7KSE, is a regular contributor to AmateurRadio.com and writes from Cumbria, UK. Contact him at [email protected].

Ok all you JT-65 op's out there I have some questions about my setup here at VE3WDM using the new release of WSJT-X ver 1.6.0. Here is what I am using in my setup- Elecraft k3 in DATA A mode, Signalink USB, Windows 7 and finally as I said WSJT-65 ver 1.6.0. Tigertronics has a great web page for setting up the sound card for Windows 7. I followed all the step and all seemed to go well until I noticed one setting keeps reverting back to a default setting. Once I go to the step "Setting the windows software playback levels" you are instructed to set WSTJ's sound level to 50% which I did. I kept this window open but notice once the WSJT program came out of transmit the WSJT volume reset to 100% and stays there? To get the setting back to 50% you have to manually reset the volume but once again it resets to 100% after

Reset sound setting?

transmitting. The other issue is my waterfall and really at this point Im really not sure if it's a issue or lack of knowledge of this mode. I have seen on many Youtube videos of a nice blue waterfall with yellow and red JT-65 signals. My waterfall has two very large "signals" on the left and right of the waterfall. The first picture (PIC-1) is with the signalink RX at zero so there is no decodes (that makes sense) but what are the "things to the left and right on the waterfall?

PIC-1

As I turned the volume setting on the Signalink to 9 o'clock I was able to see decodes but the mystery signals were still present on the left and right to the waterfall. This can be seen in PIC-2 but then just an hour later with all settings the same what waterfall looks like PIC-3!

PIC-3

PIC-2

So I'm not really sure what is going on with the receive RX and why the sound setting is getting reset from 50% to 100% after each transmission. Any input would be a great help to getting this mode up and running.

Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

I recently had the opportunity to try out a new ISO-TIP 7700 soldering iron. This is a rechargeable soldering iron without a lot of extra features but it is plenty capable for small soldering tasks. Here’s a few specs from the ISO-TIP web site:

The post ISO-TIP 7700 Soldering Iron Review appeared first on The KØNR Radio Site.

Bob Witte, KØNR, is a regular contributor to AmateurRadio.com and writes from Colorado, USA. Contact him at [email protected].

Amateur Radio Weekly is curated by Cale Mooth K4HCK. Sign up free to receive ham radio's most relevant news, projects, technology and events by e-mail each week at http://www.hamweekly.com.