AmateurRadio.com

I’ve worked contests before.  Typically if I hear a contest taking place on the bands I’ll tune around and answer a few CQ’s to give points away.  However, I’ve never been serious enough about it to spend several hours working a specific contest and do most of it while running a specific frequency.  Most contests (excluding Field Day) I generally use the search and pounce method of scanning up and down the bands listening for contest stations calling CQ, then pounce and answer their CQ. 

I’ve had the Colorado QSO Party on my calendar for a few weeks now and coordinated the time with my wife so I could work the contest.  From the beginning I decided I wanted to try my hand at contest operations and I would log my contacts in a suitable logging software and submit my log.  I really had no expectations of just what the outcome would be.  My goal was to have fun and represent my state of Colorado as proudly as possible on the amateur bands.

The Colorado QSO party was scheduled to start at 6 AM (local) and run for 16 hours until 10 PM (local).  The work week prior had been difficult and I decided I wouldn’t get started too early of a start.  I had my priorities in the right order and made sure to switch on the coffee pot before the HF rig.  With coffee in hand, I turned on the computer and the HF rig just a little after 8:30 and positioned myself on 14.280 and began calling CQ contest. 

The Q’s began flying into the log book and I probably had logged 30 or so within what seemed like no time at all.  I quickly recharged my coffee cup and logged another 30 or so before lunch.  I took a short break for lunch and then things slowed down.  20m had been hot in the mid-morning hours, but all that changed after lunch.

The best laid plans, well…are not always exactly what you want them to be.  We’re trying to get new windows installed on the ground level portion of our house this year.  The salesman was dropping by for the contract signing and this took a little longer than planned.  After about 90 minutes the changes were incorporated (gotta keep the wife happy) and I was back on the air.  But I would have another 2.5 hours off the air as we agreed to attend a neighborhood BBQ (gotta keep the wife and neighbors happy).  I got back home and got back on the air for the last 90 minutes of the QSO Party. 

The final 90 minutes was slow and I switched between the 40 and 20m band and managed to work an additional 10 QSO’s.  All-in-all it was a lot of fun.  I worked a total of 138 QSO’s for a total of 8004 points. 

My setup for the Colorado QSO party consisted of my Yaesu FT-950 (I really love this rig), a Heil Pro-Set headset with the HC-4 mic and for true hands free operation, I dusted off my Heil footswitch.  I also logged using N1MM software for the first time.  I had searched for logging software which would work for the Colorado QSO party.  This did the job and I look forward to using it again for other contest logging. 

In closing, I’m not sure where my numbers will rank in the totals.  I know others who participated scored much higher.  I didn’t begin it to win it, I did it to have fun and mission accomplished.  I do look forward to the next contest and of course next year for the Colorado QSO party.  Radio Sport is fun, exciting and ham radio.

Until next time…

73 de KD0BIK/AE

A Marconi style straight key homebrewed by Rich, WB9LPU (copyright Richard Meiss, used with permission)

After my last post on my visit to Signal Hill I have been contacted Richard Meiss, WB9LPU, who constructed a straight key in the tradition of the keys made by the Marconi company, to celebrate the centenary in 2001 of Marconi’s reception of the first transatlantic signal. Rich has a written an account of the construction of the key, which is mounted on a piece of Newfoundland soapstone and it can be accessed below by clicking on ‘WB9LPU Marconi Style Key’; it is well worth reading.

WB9LPU Marconi Style Key

Rich manufactures many keys, paddles and bugs and his craftsmanship is outstanding.  There will be more posted on Rich’s work on the blog in the near future, but to whet your appetite here is a video of one of his homebrew bugs.

Please note Rich’s materials (photograph and PDF document) are included here with permission and do not fall under the Creative Commons license that I use on this blog.

Welcome to Signal Hill

Back in June I attended a conference at Memorial University at St John’s Newfoundland.  The morning of my last day in the city a colleague and myself went to visit the historic site of Signal Hill, where Marconi received the first transatlantic radio signal after they were transmitted from Poldhu Cornwall, England, in December 1901.

The day we visited the Hill was thick with fog, which had enveloped St John’s for the five days I had been there.  Still it was good to visit such an important site for radio even if you could not even see the sea which was at the foot of the hill.  The Cabot Tower at the top of the hill is not the actual building where Marconi received the signals, that was then adjacent Fever Hospital which was destroyed by fire in 1920, however the Cabot Tower is the focus of the commemoration of the event and it has an exhibit, a shop and a radio station, VO1AA, run by the Society of Newfoundland Radio Amateurs. The shop is at the entrance level and then there is a floor for the exhibit, you can also gain access to the roof – which probably has fine views in good weather but the fog was thick the day we visited. Unfortunately, there was nobody manning the station so I did not get chance to operate from there.  Still, there was plenty on display although the modern equipment looked like it was locked away. The photographs below show some of what was on display.

The name ‘Signal Hill’ does not come from Marconi’s work, but due to the fact it was a viewing post for incoming ships.  Once the merchant line was identified a flag associated with that company was raised so the stevedores and other dockworkers for the respective company could get ready for the ship’s arrival in the port of St John’s. There is a photograph of rolled up and neatly stored set of flags, which I presume were the company identifier flags, in the gallery below.

Click to view slideshow.

In the shop I bought a copy of “Marconi’s Miracle” by D. R Tarrant.  This is a short (101 pages) but concise account of the reception of the first transatlantic signals, including the build up and subsequent controversy of Marconi’s work.  The controversy being that Marconi was effectively and quickly forced to cease his work in Newfoundland as the Anglo-American Telegraph Company enforced their exclusive rights to  telegraphy systems in Newfoundland.  They obviously felt concerned the new wireless system would take business from their cable system.

Just further down the Hill from Cabot Tower is a visitors centre that has more information about not only Marconi but the military significance of the Hill and the trading in the region.  That is worth a visit too.

So, if you find yourself in or near St John’s I strongly recommend you visit Cabot Tower and if you are an amateur radio operator it is a ‘do not miss’ just for its important significance.

Following the success of the Wouxun radios, we have a new Chinese handheld transceiver that has many hams excited – the Baofeng UV-3R. The UV-3R is a dual band (UHF/VHF) 2W “micro” transceiver manufactured by Vero Global Telecom and sold by Baofeng. While the Baofeng brand is the most popular, the radio is also sold as the Comtex UV-3R, the Magiksu UV-3R, and the Zastone ZT-UV3R. (Baofeng also sells the UV-100 and UV-200 models that share common internals with the UV-3R, but have some cosmetic differences. Also, on ebay.com you can find speaker mics for these models that are unavailable for the UV-3R.) One reason the UV-3R is so popular is its relatively low price – less than $50 via ebay and slightly more from the US suppliers. At this price and small form factor, it makes a great back-up radio to keep in a truck glove box or a laptop bag.

Cosmetically, the UV-3R is very similar to the Yaesu VX-3R.

The dimensions are the same, but the UV-3R is missing a few buttons on the front panel and the functions of the duplicate buttons are not the same as the VX-3R.  The UV-3R, in the fine tradition of Chinese radios, adds an LED flashlight. The radio also is available in red, yellow, blue, and camouflage in addition to the standard black. When holding both the Yaesu and Baofeng in my hand, it is easy to see and feel the superior quality of the Japanese radio.

A quick review of the technical specifications reveals that this radio is dramatically different from the VX-3R. The UV-3R is a 2M/440 MHz transceiver and FM broadcast receiver. An abbreviated list of its features/functions/specs is below. (A full list can be found here.) The radio is built by levering the power of the RDA1846 by RDA Microelectronics. This single transceiver chip provides most of the radio functionality – essentially making it a SDR.

Functions and Features
– 50 CTCSS, 104 CDCSS
– Time-out Timer (Off/30/60/90/120/150/180 secs)
– Shift Frequency
– VOX (Off/1-9 Levels)
– Call Tone (1750 KHz)
– Squelch Set (1-9 Levels)
– Electronic Volume Adjusting (8 Levels)
– Keypad Lock
– Backlight (On/Off/Key)
– Tail Tone Elimination
– Battery Save
– Restore to Factory Default
– PC Programming
– FM Radio Channel Storage

Technical Specification – General
Frequency Range | 136-174/400-470 MHz
Channel Capacity | 99
Channel Spacing | 5/6.25/12.5/25 KHz
Operated Voltage | 3.8V
Standard Battery | 1500 mAh
Battery Life | 10 hours
Dimensions | 1.9″ x 3.2″ X .9″ (Approximate)
Weight | 140g

Technical Specification – Transmitter
RF Power Output | 2W

Early adopters were “treated” to a version that appeared to be rushed to market – the units only had twelve menu options, the s-meter was worthless, and it came in a rather plain box. The subsequent version added six more menu options, improved the signal meter, and now comes in a more polished box.

The menu options are:

In addition to the cost and size, hams give the UV-3R favorable reports for both transmitted and received audio. On July 20, 2011, the UV-3R became Type 90 accepted by the FCC. The FCC documents can be found here.

The UV-3R is easy to use in spite of a somewhat confusing manual. ZL2GVA mitigated that short-coming by releasing an easy to use cheat-sheet.  While most folks find it easy to program the memories from the radio itself, the UV-3R can be programmed from a computer using a USB cable and software from Baofeng. In addition to the factory software, the UV-3R is also supported by the CHIRP cross radio programming application. (CHRIP may not program all features for all radios; it is intended to allow hams to transfer memories from one device to another with little effort.)

In addition to the USB programming cable, the radio has several accessories. It comes with the manual, charger, a charger adaptor (if needed), a charging stand, wrist strap, an UHF antenna, a VHF antenna, an ear bud/mic combo, and a belt clip. The shorter antenna (with a red ring) is for UHF. The longer antenna is for VHF. The UV-3R requires an antenna with a SMA-M connector. The antennas perform well, but many folks have wished for a dual band antenna. The Nagoya NA-701 and Nagoya NA-666 both seem to be popular choices. The antenna connector is fairly close to the LED, so some trimming may have to be done to get a good fit.

Car chargers, cases, and the USB programming cable are available as options or sometimes included as a bundle with the radio. The battery is a common NP-60 (FUJI compatible), so picking up an extra one is easy to do. Also, with a slight modification to account for the belt clip mount, the AA battery pack (FBA-37) for the Yaesu VX-3R can be used to run the UV-3R. For me, the car charger and the AA battery pack are the must have accessories for the UV-3R in its role as a backup radio.

The radio is not without some minor problems and quirks. For example, one oddity is that it uses the less common negative tip for the power plug. As for the problems, hams have reported issues with fit and finish – specifically plugs/sockets that result in loose connections. If pushing the plug with all your might doesn’t work, then try backing it out a little. Also, hams have found spurious emissions on harmonic frequencies.  There was a lot of debate about the severity of this issue on the UV-3R Yahoo group – bench vs. real world, letter vs. spirit of the FCC regulations, Type 90 Acceptance impact, etc. Whatever the severity of the emissions, it did not prevent the UV-3R from meeting the requirements of the FCC. Another common complaint was with the loud receive volume. Even at the lowest setting, the radio is quite loud. For that reason, I don’t like using it where it will bother others.

One of the advantages of an inexpensive radio is that you don’t risk much when trying to modify it. Disassembly mostly involves removing screws, but you will have to unsolder the antenna connector. Two mods seem to be the most common as they address some of the issues mentioned above. The first adds a capacitor to reduce spurious emissions on the harmonics.  The second also involves adding a capacitor to reduce the loud receive volume issue.  More frivolous mods include turning the LCD blue – but then you can have a blue radio with a blue screen.

For me, this little radio has provided a great learning experience as well as a good value for my money. It may not be the best radio ever, but the price, size, and overall good performance make it a good choice for backup radio or even one for a new ham to get on the air. It also has been interesting to see:

• the debates that sprung up around the severity of the spurious emissions,
• the wisdom (or not) of using a dual band antenna,
• the variety of applications from simple transceiver to APRS and tracking satellites

Credit goes to a lot of the guys on the UV-3R Yahoo group  – I don’t have the knowledge, tools, or time to do a lot of the research/testing/playing that they have done. I highly recommend the Yahoo group – although it has now reached a point where a lot of the same questions are being asked.

Editor’s note: I personally follow Brick’s blog and find it very worthwhile. While not all content is Amateur Radio related, I encourage you to check it out. -Matt W1MST

Brick O’Lore wrote this guest post and blogs regularly about a variety of topics at http://www.brickolore.com. Contact him at [email protected].

After only 78 views on the website yesterday, I figured I should step up my game. One aspect of Ham Radio that I started to look at was Digital Amateur TV. The analog version, while still around, I’m sure is fun, but digital seems more my speed, being a Ham and a Geek. So here are a few things to kind of wet the appetite for Amateur Television. One is a simple link to a website in the Netherlands, with all kinds of information on digital amateur television. It’s in English, so don’t worry about busting out your Dutch to English dictionaries or Google Translate. There is also a nice site from a group in Ohio with some great info. I saw the link for this a while ago in QST, I think.

The other is just the guys from Ham Nation talking about Amateur Television. Now I haven’t seen this episode yet, but it’s one that I really should sit down and watch. So, here ya go.

73.

Rich also writes a Tech blog and posts stories every Tuesday and Thursday on Q103, The Rock of Albany’s website, as well as Amateur Radio stories every Monday thru Friday on AmiZed Studios and hosts a podcast called The Kim & Rich Show with his fiance’ Kim Dunne.

Congratulations to:

Jim, AF5S
Frank, NF8M
Francisc, YO4PX
Larry, KI6ZQY
Jim, KK4DJX

They’re the five winners of our Nifty Accessories giveaway!

Thanks to everyone for participating and stay tuned for our next contest.