AmateurRadio.com

Contact Info:

• Contact Russ at [email protected] or [email protected].
• Listen to the live stream every other Tuesday at 8:00pm Central time. Check the LHS web site for dates.
• Leave us a voice mail at 1-909-LHS-SHOW (547-7469), or record an introduction to the podcast.
• Sign up for the LHS mailing list.
• LHS merchandise is available at the Merch link on Web site. Check out the Badgerwear or buy one of the other LHS-branded items at PrintFection or CafePress. Thanks!
• Thanks to Dave from Gamma Leonis for the theme music.

Music:

Russ Woodman, K5TUX, co-hosts the Linux in the Ham Shack podcast which is available for download in both MP3 and OGG audio format. Contact him at [email protected].

On my vacation I took the opportunity to activate several SOTA (Summits on the Air) summits. This post deals with four that I activated in the W1 call area this past week. The references below are the SOTA references and the points are what each summit is rated. The points are on a scale of 10


W1/HA-009 Mount Monadnock (4 pts) June 6, 2013, New Hampshire

This is a tough 4 pointer. With over 2,000 feet of prominence I under estimated the mountain and made a few mistakes as well. First I counted on my grandson to carry the Buddi-stick, he forgot it and I didn't double check. Thankfully I had an EFHW with me, but only a 13 foot pole to run it from. There are no trees on the summit. Accordingly I think my signal suffered a little. It was very windy and cool on the summit and relatively crowded, which ultimately shortened our stay. I used an FT-817 on this activation because the original plan was for my two grandsons, KF5GYD and KF5GYE to operate some SSB, however conditions were marginal for CW, so we weren't able to execute that part of the plan.

The trail up is one granite rock after another. I had envisioned a wide, sodden trail to the summit, but that is not the case, lots of scrambling up granite slopes on a trail that goes straight up. For those familiar with the mountain, we took the White Dot Trail up, the more direct, and the White Cross Trail down. Coming down is tough because its like descending on a path of uneven steps and no real opportunity to enjoy the downhill slope and some relatively steep pitches down granite slabs. Two hours up and 1.5hrs down. I was able to make 7 QSO's from here (it only takes 4 QSO's to qualify for the points). I did work G4ELZ and S58AL to spice up the day.


W1/AM-381 Mount Agamenticus (1 pt) June 7, 2013, Maine

The morning dawned with steady rain and the forecast called for more. Not a good day for a hike. We decided to travel to the southern coast of Maine. A quick check of the SOTA database revealed a drive-up one pointer, Mt. Agamenticus. Easy, right. Wrong. My grandsons and I set up, after the ceremonial climb up the last few feet, on a picnic table in the blowing rain and zero visibility. Let's get four quick QSO's and get out of here. What I didn't know was that the A-index was 34 and the K was 4. Over an hour later I made the fourth QSO, way too much work for one point. This day was our 38th anniversary and Boogies 11th birthday.



W1/GM-003 Equinox Mountain (8 pts) June 8, 2013 Vermont

Equinox Mountain is near the town of Manchester, VT. It is an 8 Pointer, with a road to the top. I decided to make the most of my remaining time in the region and a drive up would save some time and give me a shot at getting another summit in. There is a toll road to the top and there is actually a functioning monastery on the mountain. Again visibility was near zero on the summit and misting rain. I first set- up with the vertical and had some success but it was noisy as conditions still weren't very good, so I was able to get some height on the EFHW, lashing my telescopic pole to the balcony of the visitor center on the summit, and made a few more QSO's finishing with 10. I started with the FT-817, but finished with my MTR which I discovered has a better receiver in noisy conditions.  No real DX from here, NS7P from Oregon was my most distant contact.



W1/GM-032 Mount Snow (6 pts) June 8, 2013 Vermont

Mount Snow is a ski mountain with a lift most of the way up the mountain leaving a relative short but steep hike to the summit. The question was whether I could get the QSO's I needed in the time I had. We arrived at the mountain at 3:00 and the lift closed at 4:00. We summited at 3:25, set up the vertical with one grandson holding the trekking pole mounted vertical, the other holding my battery and me with the MTR, micro key and log and we were on the air by 3:30. DJ5AV was the first in the log and CT1BQH followed a couple of minutes later. By 3:40 I had 6 QSO's in the log. A quick tear down and back to the lift by 3:55. Made it. This one was the most satisfying, six points I didn't think I would get.





Mike Crownover, AD5A, is a regular contributor to AmateurRadio.com and writes from Texas, USA. Contact him at [email protected].

One day my call will be in the confirmation box

I had some time to flip the switch on the K3 this evening and the bands at first did not seem to be in great shape. As I tuned around I came across a station that was S2 and up to S6, the station was 9K2MU from Kuwait! He was operating split and it did not seem to be to much action trying to contact him. He was calling CQ and listening I threw my call out there and the propagation gods were not smiling on me as my call was not heard. He did come back to some other stations as time went on but I still threw my call out there. Then he was spotted on a cluster and all hell broke loose! The action went from casual to bumper to bumper. By that time is was tea time for me....which I am sipping as I write this post. Even though I did not contact Kuwait it was very cool to hear him in there and have the opportunity  to make the contact.
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

My Elecraft K2 which is now more than 11 years old (serial #2198) has served me well, even earning me QRP DXCC (100 countries with 5 Watts) some years ago. It is still cosmetically in mint condition, except for that single item which sticks out like a sore thumb: The tuning knob.

This became very clear to me a couple of months ago when LA8OKA’s and my K2 were displayed side by side at our stand at Oslo Maker Faire. His is less than two years old, serial #7224, and they were similar except for the scratches in the faceplate of my tuning knob. If I am allowed to generalize from my knob only, it seems as if the faceplate had poor quality paint and has been replaced by a better quality version over the years.

Anyway I ordered a new one and paid the price which at present is $30.37 plus shipping. The difference is really striking and I feel like I have a new K2 now, well worth the price! The K2 now serves as my second rig, and I think it has many years of good service still to come.

Related posts:

• Elecraft K2 do’s and don’ts
• Five LEDs in buttons for the Elecraft K2
• My Elecraft K2 Modifications

Sverre Holm, LA3ZA, is a regular contributor to AmateurRadio.com and writes from Norway. Contact him at [email protected].

If you have used a Yaesu FT-817 on SSB you’ll have probably been annoyed by the lack of a TUNE button to generate a steady carrier for antenna tuning. You usually have to press the MODE button a few times to select FM or PKT, use PTT to send a carrier, then change mode back to USB or LSB. It isn’t one of life’s greater annoyances, but it’s a nuisance all the same, especially if you use an antenna like the AlexLoop which needs retuning every time you change frequency.

A couple of weeks ago I received a letter from one of my blog readers, John G4HUK, enclosing a Quick-Tune Dongle that he makes for the Yaesu FT-817, FT-857 and FT-897 rigs. It’s a neat little gadget that plugs into the ACC port on the back of the radio. What it does is let you generate a tuning signal in SSB mode by double-clicking the microphone PTT. Simple but effective! It won’t be so useful for home users who have a CAT cable plugged into their ACC port already, but for SOTA operators and other exponents of outdoor radio (apart from CW operators who can just hold the key down) it could be a godsend.

The Quick Tune Dongle installed on the back of the FT-817

The dongle didn’t work for me at first until I set the baud rate of my FT-817’s ACC port to 9600. This is explained in the ‘manual’. The instructions also explain how you can reconfigure the dongle to change the way it works. By default it will use PKT mode to generate the tuning carrier and ignore double-clicks made in any mode other than USB and LSB, which I think will suit most people.

I think it is an ingenious little gadget which you can get from HUK Electronics for £15.95 + postage. Here’s a video of the dongle in action.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

A couple of years ago I attempted to upgrade my rig to a more ‘vase’ station type. I really like my IC7000 and have thoroughly enjoyed using it but I have also enjoyed operating from larger rigs more. There’s less need to get a PC up and running and to use that to drive the menu’s. The reason why I didn’t get a new rig last time is because a more pressing need was there, we needed a new car.

Well now I get to think about it all over again. I’ve got a figure of around £1500 in my head and thought that the TS590 might do me well. Other options would be a second hand K3 but they are rarer than hens teeth and likely to be more money and an ideal would be a new Hermes SDR, but then again that would be more like £2000+.

I found this decision quite difficult before but the issue doesn’t seem to want to go away in a hurry. New or second hand I’m not really bothered. I just want the best I can for the money. HF & 6m are a must. 2m would be great and 70cm’s as well so i can do some satellite work but I’ll happily drop the VHF for a better HF rig. The TS590 does seem like the best choice so far.

Alex Hill, G7KSE, is a regular contributor to AmateurRadio.com and writes from Cumbria, UK. Contact him at [email protected].

My contest screen

Ham radio is very diverse and has something that seems to click with each radio operator. One of my "clicks" is contesting and I also add to it the flavor of QRP (another one of my clicks). I enjoy using my PC in conjunction with ham radio and when it comes to contesting a PC is almost a must have. The program I use for contesting is N1MM logger. It 's a great program and works very well, has great support and I'm not sure of any contests that it does not support. Over time I have added some programs to my contest repertoire. I found that controlling N1MM got me used to using my mouse and that is the way to go when it comes to contesting. I then came across N4PY's rig control program. It's another way to incorporate my mouse to allow me control of my K3 during contests. This program is very well supported and the times I have emailed questions and got a reply within 1/2  hour!! This program will allow you to control most if not all functions of your radio with the click of a mouse. In a contest this is great because you are not going from mouse (N1MM logger) and back to the radio. For me it's more of a smooth type of operation using the mouse.  Hold on....my contest hangup gets weirder.....I have a keyboard tray that supports my keyboard,
Begali Contour key and why not VFO control as well!!!  Now comes the Flexcontrol VFO knob. This is a USB device that allows  you to tune your rig (and more) from where you ask.....well the keyboard tray of VSP manager to the mix. This great little program (that is free to hams) allows all the programs to live happily with each other.

FlexControl knob

coarse!  N4PY's programs allows you to interface the Flexcontrol with your rig through his program. I did say the Flexcontrol did more than just tune, it has 4 memory buttons that can be programed through N4PY's program to preform often used radio functions.  Also the VFO knob can go from fine tune to three other tuning choices by just clicking the knob! To do  this the radio, Flexcontrol knob and N1MM all have to be happy coexisting with each other. To do this  I added
You all know how it is when you have had a nice dinner and there is still room for a nice desert......well my nice dinner on my keyboard tray was the Flexcontrol knob, Begali Contour key and the mouse....there is still room for one more item! I added the K1EL USBwinkey which I assembled myself.  The N1MM contest program is able to incorporate the Winkeyer in it's program, so when I program the CW messages into the winkeyer they will be used by N1MM when I mouse click on the N1MM macro button. This is great because the Winkeyer is very easy to program and you can save various keying programs into individual files. This way I will have a file for each CW contest and just a mouse click to program N1MM for each CW contest.  If all files are stored on my PC and the Winkeyer is set up via the PC and CW is set through N1MM logger then why the heck does the Winkeyer have to be on the tray!!! Well Winkeyer has a nice variable pot control that can vary the CW on the fly. This way for op's who are sending slower or faster CW you can be varied  by a simple turn of the Winkeyer knob.

Keyboard tray setup

Finally there are those out there that subscribe to the KISS theory.....Keep it simple stupid......and this is true when you introduce other factors with ham radio. As for me trying and sometime failing is well worth it when in time all comes together and works well.


Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].