More Fun With the Rock Mite

Last night I had a few minutes to operate, so I thought I would call CQ with my 20M Rock Mite. I did a little more than CQ however, as I wanted to know how the radio was getting out. First, I measured the output power. I had assumed 500 mw of output during my first QSO's with the radio but after measuring the output, it was closer to 300 mw. Secondly, I wanted to see where the radio was being heard using the Reverse Beacon Network, If you've never played around with this, it is pretty cool. There is an entire network of skimmers out there that will post your frequency and callsign if you are copied calling CQ on CW.

So I called CQ with the beam pointed due north from my Boerne, TX QTH. Withing seconds the RBN spotted me calling CQ on the east coast and shortly thereafter on the west coast. Pretty cool. So clearly I was getting out fine with my 300mw. After a few CQ's, AB4QL, Barry in Alabama, called me.  I swung the beam and he was a solid 559 running his KX-3. He gave me a 329, but he didn't seem to miss anything. The contact was just short of a rag chew but we had nice QSO.

After we signed with each other, I looked up Barry on and learned that his QTH was 820 miles from mine. At 300mw that comes out to 2,733 miles per watt. Any way you slice it, that's good mileage.
Mike Crownover, AD5A, is a regular contributor to and writes from Texas, USA. Contact him at [email protected].

Leave a Comment

Subscribe FREE to's
Amateur Radio Newsletter
News, Opinion, Giveaways & More!

Join over 7,000 subscribers!
We never share your e-mail address.

Also available via RSS feed, Twitter, and Facebook.

Subscribe FREE to's
Amateur Radio Newsletter

We never share your e-mail address.

Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!

  • Matt W1MST, Managing Editor

Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: