|PTD - 400 kHz Potsdam, NY|
This coming weekend will see another monthly CLE challenge. This time the hunting grounds will be 400.0 - 419.9 kHz.
For those unfamiliar with this monthly activity, a 'CLE' is a 'Co-ordinated Listening Event', as NDB DXers around the world focus their listening time on one small slice of the NDB spectrum.
A nice challenge in this one is to hear PTD on 400kHz located in Potsdam, New York. It's a 25-watter but is rarely logged out west. I have heard it only once, back in January, 2010. Listen for its USB CW identifier (with your receiver in the CW mode) on 401.010 and its LSB ID on 398.984 kHz.
MF propagation this past week has been very good and signals in this frequency range should be propagating well if things stay undisturbed for the weekend.
When tuning for NDBs, put your receiver in the CW mode and listen for the NDB's CW identifier, repeated every few seconds. Listen for U.S. NDB identifiers approximately 1 kHz higher or lower than the published transmitted frequency since these beacons are modulated with a 1020 Hz tone approximately.
For example, 'AA' near Fargo, ND, transmits on 365 kHz and its upper sideband CW identifier is tuned at 366.025 kHz while its lower sideband CW ident can be tuned at 363.946 kHz. Its USB tone is actually 1025 Hz while its LSB tone is 1054 Hz.
Often, one sideband will be much stronger than the other so if you don't hear the first one, try listening on the other sideband.
Canadian NDBs normally have an USB tone only, usually very close to 400 Hz. They also have a long dash (keydown) following the CW identifier.
All NDBs heard in North America will be listed in the RNA database (updated daily) while those heard in Europe may be found in the REU database. Beacons heard outside of these regions will be found in the RWW database.
From CLE organizer Brian Keyte, G3SIA, come details via the The NDB List Group:
Our 238th coordinated listening event starts on Friday.
This frequency range is not packed with signals for any of us, but
the current excellent conditions should give us some nice surprises.
Do join in, even if you only have an hour or so to spare over the weekend.
Days: Friday 23 Nov - Monday 26 Nov 2018
Times: Start and end at midday your LOCAL time
Range: 400 - 419.9 kHz
(Apologies to Listeners ‘down under’ - not much to listen for in this range
at summer time. Could listen via a remote receiver instead? See below)
Just log all the NDBs that you can identify with nominal (listed)
frequencies in the range - it includes 400 kHz, but not 420 kHz -
plus any UNIDs that you come across there.
Please send your final log to the List (no attachments and ideally
in a plain text email) with ‘FINAL CLE238’ in its title.
Show on each line:
# The Date (e.g. '2018-11-23' etc. or just '23' )
# The Time in UTC (the day changes at 00:00 UTC).
# kHz - the nominal published frequency, if known.
# The Call Ident.
Please show those main items FIRST. Other optional details such
as Location and Distance go LATER in the same line.
As always, of course, tell us your own location and brief details
of the equipment that you were using during the Event.
We will send the usual 'Any More Logs?' email at about 18:00 UTC
on Tuesday so that you can check that your log has been found OK.
Do make sure that your log has arrived on the List by 09:00 UTC
on Wednesday 28 November at the very latest.
The combined results should then be completed within a day or two.
You can find full details about current and past CLEs from the CLE page
http://www.ndblist.info/cle.htm It includes access to CLE238 seeklists
for your part of the World, prepared from the previous loggings in Rxx.
Good listening - enjoy the CLE.
Brian and Joachim
From: Brian Keyte G3SIA ndbcle'at'gmail.com
Location: Surrey, SE England (CLE coordinator)
(If you would like to listen remotely you could use any one remote
receiver for your loggings, stating its location and owner and with their
permission if required. A remote listener may NOT also use another
receiver, local or remote, to make further loggings for the same CLE)
- determine, worldwide, which beacons are actually in service and on-the-air so the online database can be kept up-to-date
- determine, worldwide, which beacons are out-of-service or have gone silent since the last CLE covering this range
- will indicate the state of propagation conditions at the various participant locations
- will give you an indication of how well your LF/MF receiving system is working
- give participants a fun yet challenging activity to keep their listening skills honed
The NDB List Group is a great place to learn more about the 'Art of NDB DXing' or to meet other listeners in your region. There is a lot of good information available there and new members are always very welcome. As well, you can follow the results of other CLE participants from night to night as propagation is always an active topic of discussion.
You need not be an NDB List member to participate in the CLEs and all reports, no matter how small, are of much value to the organizers.
Remember - 'First-time' logs are always VERY welcome!
Reports may be sent to the NDB List Group or e-mailed to CLE co-ordinator, Brian Keyte (G3SIA), whose address appears above. If you are a member of the group, all final results will also be e-mailed and posted there.
Please ... give the CLE a try ... then let us know what NDB's can be heard from your location! Your report can then be added to the worldwide database to help keep it up-to-date.
Have fun and good hunting!