AmateurRadio.com

We are rapidly approaching the first anniversary of the strange disappearance of the Lost Island DX Society (LIDS) as first reported on this blog. The LIDS were last heard from via the  Fi-Ni Report on September 18, 2012, reporting on the Talk Like A Pirate Contest.

Most people have given up the search for the LIDS, given the extended period of time they have been missing. One consistent rumor circulating in the DX community is that the LIDS were trying to join the Amsterdam Island DXpedition (FT5ZM) for a January 2014 activation of that island. Unfortunately, the LIDS did not realize that the island is in the middle of the Indian Ocean and not in Amsterdam. As the story goes, they had already bought nonrefundable airline tickets to Europe before they found this out. It seems that they may try to recover with a Summits On The Air (SOTA) activation, if they can find a hill high enough within walking distance of their Amsterdam hotel.

Fearing that the LIDS are simply lost somewhere in Europe, a group of hams is petitioning the White House to launch a surveillance drone to find them. As one ham said, “They’ve got them dang drones flying around spying on everyone, they might as well do some good.”

I agree completely. If nothing else, Do It For The Children.

73, Bob K0NR

Come join us on Saturday, September 14th, 2013 (9:00 AM to 2:00 PM) at the Prairie Winds Elementary School , 790 Kings Deer Point East, Monument, CO for Tech Day 2013. Tech Day is for beginner to intermediate hams who want to learn more and take that ‘next step’ in ham radio.

Everyone is welcome, no registration is required. Just show up with your bright smiley face, ready to learn something and have fun.

Presentations

9:30 am – Getting started in QRP operating from Steve WGØAT of Rooster & Peanut fame [http://www.youtube.com/user/goathiker]

10:30 am – Mobile radio installation tips with James KDØMFO

11:30 am – Practical antennas made out of copper pipe by Al WBØTGE

12:30 pm - Ham Shack 101 - the basics of setting up a home station by Stu WØSTU

1:30 pm – Some Practical Antenna Theory – Bob KØNR

* Each presentation is approximately 20 minutes with Q&A at the end.

Live Demonstations

All day long, we’ll have these displays set up so you can get a hands on look at radio operating:

QRP operating, Flex Software Defined Radio (SDR), HF antennas, mobile radio installation

The local Boy Scout troop will be selling hotdogs and drinks in hamfest style.

Tech Day 2013 is proudly sponsored by the WØTLM Amateur Radio Club 

I’ve tried out a number of mapping apps on my iPhone but only recently found one that I really like for hiking. Most of these apps access maps on the network when needed so they are not stored on the smart phone. When you fall of the edge of the network in the backcountry they don’t work. This is a non starter for most of my backcountry hikes. Even if I am close to civilization, I’ll typically drop down into a valley at some point on the hike, losing my network connection.

The MotionX GPS app solves this problem by allowing you to download and storing maps on your iPhone. This requires you to do a bit of planning on what maps you need but it seems to work pretty well. The map quality is good and includes topographic information. (Click on the map image above to zoom in.) No, you probably don’t want to download maps to cover the entire US as you’ll consume all available storage!

Besides mapping, MotionX supports a ton of other features such as tracks, waypoints, compass headings, etc. It is quite flexible and I am still learning all of its tools.

Oh, did I mention this app only costs $1.99? Amazing!

- Bob K0NR

At the Dayton Hamvention, I had picked up the Buddistick™ Deluxe Package portable HF antenna. This antenna is very popular with the Summits On The Air crowd and other QRP enthusiasts. Usually when I am doing SOTA activations, its all about VHF. But being a self-proclaimed HF Slacker, I might get on HF sometime from a summit, so having a Buddistick available seems like a good idea.

I decided I better check this thing out to see if I can make it work on our back deck.

The Buddistick Deluxe Package

After actually reading the instructions, I assembled the antenna and used the clamp mount to attach the antenna on our deck railing. I strung the single radial out on the deck to the recommended length and connected up the transceiver using a short length of RG-8X cable.

Then I used the “by ear” tuning technique to set the tap on the antenna coil. You basically just run the tap down the coil to find the spot that produces the highest noise level at the transceiver.  I checked the match using the built-in SWR meter in the Yaesu FT-817 and verified that it was good.

The tapped tuning coil

At first, I tried 20 Meters and discovered an S6 noise level. Not good. Retuning the antenna, I moved up to 15 Meters and found the noise level to be much lower. I also heard a few strong stations working the North American QSO Party.

The mighty Yaesu FT-817 transceiver

I tuned around on the SSB portion of the band and found Bob N4BP calling CQ Contest so I gave him a quick call. He came back to me right away and I gave him the contest exchange of name and state. QSL and I was in his log, no problem! I heard N8II calling and repeated the same exchange, no sweat.

Hey, this QRP stuff really works!

So that was a great first experience with the Buddistick. Now I need to try it from a summit.

73, Bob K0NR

Bald Mountain (W0/SP-115)

Lately, I have been focusing on activating the SOTA (Summits On The Air) peaks near our cabin in the mountains. The basic idea is to identify a SOTA summit, hike to the top and make a few contacts on VHF. On Friday, my spousal unit (Joyce, K0JJW) and I decided to head out to an unnamed peak (W0/SP-099), southeast of Buena Vista, CO.  By no coincidence, this summit had not been activated yet, so we’d get the esteemed honor and glory of being the first.

For lesser known summits, a bit of research is required to figure out the route. My first stop is to check the SOTA database for basic information on the summit. I’ll usually have to dig further using ListsOfJohn and SummitPost. ListsOfJohn is an incredible database of topographical information, listing every summit along with information such as elevation, lat/lon, rise, etc. (The Colorado SOTA information was gleaned from ListsOfJohn.) SummitPost will usually have more detailed information on a summit but only for the more popular ones. The  SOTA Mapping Project is another excellent resource with very useful interactive topo maps. And, of course, I also dig out the US Forest Service map for the area, which often gives the best view of access roads.

We drove the Jeep to within a mile of the summit and started hiking up. I posted our route information on ListsOfJohn, so take a look there for that information. The summit is unnamed, so it is referred to by its elevation: 10123. I had my Yaesu VX-8GR burping out APRS packets which were plotted on aprs.fi when we reached the summit.

When we reached the summit, I spotted myself on the SOTAWatch web site using the SOTA Goat app on my smartphone. More importantly, the night before the hike, I sent an email to some of the radio amateurs that were likely to be within VHF range. That paid off and I worked Jim KD0MRC, Walt WZ0N and John K3NOQ on 146.52 MHz FM. Jim was hiking to Harvard Lakes above 10,000 feet, so it was special to be able to contact him on the trail. A little later, I caught KV4AL who was mobile near the top of Mount Evans. While only one contact is required to “activate” a summit, four contacts are needed to earn SOTA points, so I was happy to make these four QSOs. My gear was a Yaesu FT-60 driving a 3-element Arrow yagi antenna.

In addition, Joyce and I generally work each other on the SOTA the summit. The SOTA rules say that “QSOs with others within the same Activation Zone do not count towards the QSO total” which means that one of us needs to hike down a bit to get outside of the activation zone (75 feet vertical feet from the summit). We take turns doing this so that each of us activates the summit and makes a contact with the summit.

We took a round about path back to the Jeep and headed for Bald Mountain. At this point, we were both very tired and the thunderstorms were moving in. We decided to at least check out the access to Bald Mountain (Wo/SP-115) even if we didn’t climb it that day. It turns out that there is a 4WD road that goes to the top of the mountain, so we drove to the summit. The road is very rough in a few spots but the Jeep handled it nicely. At the top, we hiked back down a bit to meet the non-motorized ascent requirement for SOTA. We also did our “work each other” technique while on the mountain so that we each had a contact. I was not able to raise anyone on 146.52 MHz but I did catch Carl K5UK on the 146.745 MHz repeater and worked him on simplex. By this time, it was raining with lightning getting closer, so we abandoned the summit and headed back to the cabin.

Thanks to the guys that took the time to contact us on the two summits.

73, Bob K0NR

No, this is not the name of another royal baby… it’s about my third attempt to build a 2m antenna for my SOTA activations. In my earlier iterations I was unable to strike the balance between size/weight and usability.

What happened so far:

My first attempt to build a Yagi-Uda antenna was based on a design by  Paul/KD5IVP. It worked, but had some crucial flaws for my endeavors. It was a 3-element antenna made out of piano wire and a carbon fiber arrow as a boom. Very small and  lightweight indeed but in high winds/gusts the elements were flapping like a seagull during take-off. It’s demise came on it’s second outing… the arrow broke in half while bushwhacking up a mountain and I lost some of the piano wires in the woods. To read more about it and to see it in action check out this post.

I then moved on to a tape measure 3-element antenna based on a design by Joe/WB2HOL. It worked well and accompanied me on several activations –  even a few 14ers (Summits higher than 14’000 ft / 4267m). My main gripe with this antenna is that it is delicate to transport as well. The steel tape gets kinked easily since the antenna is strapped to the outside of my backpack. It’s rather easy to replace the director and reflector, but soldering the coax to the steel radiator is another story. It turned out that this design is also vulnerable to high winds and your arms start to feel the weight after a few minutes without support. You can see the antenna in action in this video, around 3:30 into the clip.

The one?
I continued my research for a suitable 2m Yagi-Uda which would fit my requirements:

• Lightweight (but sturdy enough to withstand high winds)
• Easy and save to transport
• Easy to build (even for me)

I eventually stumbled onto IZ2UUF’s Website –  an Italian radio amateur who enjoys hiking and playing with radios as well. He designed an 4-element Yagi-Uda weighing only 80 grams (~2.9 ounces)!! All elements fit into the fiberglass boom (fishing rod) for easy transport with no matching network necessary. The description to build the antenna focused on the critical parts with excellent pictures to support the instructions.

Davide/IZ2UUF modeled the antenna with 4NEC2, a free antenna modeling software package. Since he shared his input file with me, I took the opportunity to download the free SW and to learn more about antenna modelling. After a few more e-mail exchanges with him I was convinced by his design and started to source all the parts.

I did not have afiberglass fishing pole available and opted to use a plastic one I had lying around. Davide is using aluminum welding rods for his elements which I could not find at the desired length/diameter here in the US. I therefore ordered aluminum alloy 6061 rods instead (1/8″ x 6′ ) from a supplier in IL (for details see the resource section below). My build also differs in the connector (BNC instead SMA). All these changes resulted in a slightly heavier (194 g / 6.8 ounces) first version compared to Davide’s antenna. My boom alone is heavier than Davide’s complete antenna (96 g / 3.4 oz). However, I am planning to improve/reduce the weight in version two.

I had a chance to use the antenna over the week-end during the CO-14er event. All I can say so far is that it worked well and that the weight is not an issue at all… huge improvement to the tape-measure version.

For more pictures, a weight comparison and resources head over to my blog.

73, Matt/KØMOS

Grrrrrrrr! and then more Grrrrrrrr’s! FOBB 2013 was a gud one! Grrrrrr!

Anticipated rain and thunderstorms and was not disappointed. Accordingly, I took up my backpack and walked about 1/2 mile to set up under a small pavilion in our housing development’s lakeside park. So far, so good. Originally I planned to have an EFHW for 40m and another one for 20m. Upon unpacking, realized my 40m wire was in my other pack at home. SHUCKS. I had already put a shot over a 40′ high branch and pulled up a paracord to hook to the wire which was not available. Oh well… it happens even to the best of us, eh?

Grrrrr! So I tried to set up the 20m EFHW and after another great shot with my 1 1/2 oz sinker and pulling up a line realized the tree wasn’t going to give me a good shot as it was too close and not very high. Grrrrrrr=ed a bit more!

K4UPG FOBB 2013 BB#23

Rethinking mode kicked in and was glad I got out early so all the wasted time did not mess me up. Pulled out my handy 20 ft Jackite and a 17 ft crappie pole and decided to give up on a typical K4UPG “hang ‘em high” antenna and do a very Lazy L. I tried to orient it for a bit of slope towards 330 degrees which shoots from FL to Iowa and provides decent coverage of most of the US. Turned out that low antenna worked great but I think the band was pretty doggone decent for a change too.

So about 15 min before FOBB start time fired off a CQ and made a contact and shot the breeze for a bit to warm up. Nice QRP to QRP contact but not counted for contest. Just for grins. I did notice a few “early out of the blocks ops” were calling CQ BB about 10 min before the clock struck go! Grrrrrrrrr! Sync those watches gentlemen!

Contest Started:

First station heard was Cam out in California N6GA but no joy when I responded to his CQ as there was a mini-pileup on him. Grrrrr… Heard a few more 6′s during the day but no peep from Rem Bear or any others I recognized. I did end up with eight PB’s for the day though and a great TU and Grrrrr to my fellow PB’s: AF40 Chuck- PB 153 TN my last contact of the day (more later); Snowbird FL Bear Don K3RLL PB 187 in PA with his new KX3; Jeff K9JP PB 175 in MI was the loudest signal of the day and blew my ears out till I got the RF and AF turned down Grrrrr! didn’t recognize you as a PB… sri bout dat; N1EU Barry in NY PB 336 got a Grrrrr!; N3AAZ John in MD PB 276 sri 2 ya… missed a Grrrrr!; W1PNS Pete in MA PB 348 got a Grrrrrr!; W5ESE Scotty beam me up Bear PB 287 missed a Grrrr too; WA8REI a perennial PB contact for me gave me a PB 21 style Grrrrrrr! I was closing a contact and Blackjack Bear called me on the guy’s freq so kept it REAL short and sweet as I felt like if we tried to QSY there was too much traffic and we’d not make the connex. Sri Ken Bear was a messy QSO cuz of that. Missed hearing Larry W2LJ this time and listened fur some of you udder PB’s but no connex. Grrrrrr!

All in all worked 25 QSO’s in 17 states and all of them were BB’s! Lightning came up as I was finishing my QSO with AF4O and it was TOO CLOSE. Almost blew me out of my seat but I held onto the key and finished up. Sitting there holding the wire and I started singing, “Antenna on the ground, antenna on the ground, when da lightning is around get your antenna on da ground” to the tune of the famous “Pants on the Ground” song by “General” Larry Platt.

Thus ended a nice outing after 2 hrs and 45 minutes but I truly enjoyed this one. Great number of participants and bet I could have almost doubled the numbers if the lightning did not end the day. Was hearing a lot of new calls just prior to shutting down. At least I got to give the serious contesters some points this year. Maybe next year will be my turn fur sum extra Q’s ? Grrrrrrr!

72 from Orlando, Kelly K4UPG PB 173