AmateurRadio.com

Most of the time I participate in a contest just for the fun of it without any expectation of placing anywhere close to the top. Last week I was reading some of the blogs that I follow and Scot KA3DDR blogged about CQ WW DX  contest certificates you can get online. It's very simple you plug in your call and low and behold you are told if you have a certificate waiting for you. If you do it's easy you just download it and print it!

The attic dipole is working it's magic agian!

It's Sunday afternoon and thought I would flip the K3 to the on position. The RSGB IOTA contest is in full swing but I was only able to hear  few stations. As I spun across the band I came across G0PZA/EU11 in London area. I gave him a call at 500 mW's but it was just not going to happen. As I slowly raised my power I was able to make the contact with 1 watt for a 3594 miles per watt contact. I then moved around the band but was not able to hear all that much. I was pleased with this contact as the bands over the last couple of days have not been really all that great. Last night I heard a station calling CQ from Nova Scotia and even with full power at 5 watts I was not able to raise this station. I consider this evening to be an accomplishment with a 1 watt DX contact as compared to almost a local call and being shut out with 5 watts. It's 5 o'clock in the evening and I am very tired (considering I pulled an all nigher at work on Saturday) so it's soon time to hit the hay and looking forward to another week at work....NOT!!!
Have a good week everyone
 

Three weeks ago I ordered from Elecraft there XG3, it's an RF signal source device with a range from 1.5 to 200 mhz,  two programmable sweep functions, 12 programmable bands  (2m to 160m) and 4 calibrated output levels as well as a few more bells and whistles. This unit can be updated via your PC which is great when Elecraft comes up with bug fixes and new options for the unit. You can either power the device by a 9 volt battery or your DC power supply (11 to 14 volts DC). One of the reasons for me purchasing this unit was it can via software preform an Rx Sideband Null Field Calibration. This is an experimental Field Calibration program and the instructions and program were sent to me via Elecraft support. The reason I wanted to do this calibration was to stop the "woodpecker" effect I was getting on my KX3 during CW contests with stations that were very close by. The program needs run for around 20 minutes to complete and I thought this would be a great Saturday afternoon project.....not thinking that 20 minutes would turn into 2 hours with the calibration not even starting!! 

So far so good but Murphy shows up!

To do the test you first have to make sure the XG3 has the latest firmware loaded so I plugged in the supplied USB cord to update the XG3. I had the "new hardware found" info box come up and I then began the search for the USB port......well for some reason I was not able to find it. I then just plugged in my KX3 USB cable I use to update the KX3 rig with and it's com port 13. I used that cord and plugged it into the XG3 and had it look at com 13 and all was well. It seemed the firmware was up to date. For the calibration test I needed to have both the KX3 and XG3 running on USB ports of their own. So I swapped some USB cables around and I was able to see my XG3 on com 19. That was great (so I thought). I started up the RX

Not able to use available com ports

sideband null field calibration program and the first thing I was asked was to enter the com port of the KX3 and XG3. I entered the KX3 (com13) and  the program said all is well and was able to see the rig. I then went to enter com19 for the XG3 and the drop down menu in the Elecraft program only went to com port 16!!!! WHATS UP WITH THAT!!! So the calibration test came to a fast end. All this farting around took 2 hours of my time and got nothing done......I went into my device manager to see what was going on and I tried to change the XG3 to a lower com port number but I was informed that all com ports from 1 to 18 are in use, funny thing is I don't have 18 USB items to take up that many ports.....but I do have LP Bridge and VSP manager that create virtual ports and also an 8 port Edge port device that takes up virtual ports as well. My question is why does the XG3 program only go up to com port 16.....N1MM does the same thing and it's a pain!!! So I will be emailing Elecraft support to see if there is a solution to this or maybe I will go the Mac way and set this up on my wife's mac computer.

It would seem that software and ham radio can get along very well and there is an abundance of software out there to choose from. Some software is free other are available for a price, I have both here at VE3WDM. There seems to be some myths about both the free software and the software for a price. Regarding the free software I have read and heard.....
1.  It's no good as it's not supported.
2. Since it's free it must be very simple and buggy
3. I am sure it's not updated.

As for the software for a price I have heard and read......
1.It's way over priced.
2.Why pay when free software is out there?
3. Someone is just trying to make a buck.



I have both free and software I had to paid for and am very happy with both products. My software is not  the be all and end all but it's what works for me. There is some fantastic software out there that can make you grow in your ham radio journey. I hope to just excite  you to look to see what is out there.
Here is what I use and as most ham I know they love free stuff and here is the free software I use.

1. DXlabs for my every day radio adventures I am sold on DX Labs! This software has rig control, logging, world map view of DX, QRZ (and many more) look up feature and much more. With this software and with the click of a mouse able to use many features of my K3. At a glance I am able see on a world map DX spots, I am told if  I worked this country before....on what band.....and what mode. There is a huge amount this free software can do. As for updates it seems that it's almost daily this software is improving. Oh and as a side note updates are a breeze to instal and no need to jump through hoops to get the latest and greatest upgrade. If you are not sure about a feature or if the software does not seem to be doing what it should, support is fast and readily available on the internet.

 2. If you are into contesting (like me) then once again the free stuff comes to the rescue. N1MM seems to be one of the staples for contesting. Again it has rig control features, CW and SSB features, VFO A and B control, spotting networks this is just to name a few things this amazing software can do.
There are regular updates and bugs are very few and far between. Again if you have troubles the support is there and it's fast.
 
Ok lets talk crazy now.....paying for ham software

1. When contesting I said I use N1MM but I also use a rig control program by N4PY and it's not free but WOW does it enhance my contesting. (now this software is not only for contesting I just chose to use it this way) This program allows me to adjust most of my Elecraft K3 controls with the mouse or keyboard. I can used my K1EL keyer, this program allowed me to use my Flexcontrol knob.

2. Another program I dished out some coin for and never looked back is MRP40 cw decoding program. Now I know what your thinking "there are lots of free CW decoding programs out there" This is true I have tried them and they are good BUT MRP40 is GREAT. In contesting when the speeds get to what I call "crazy speeds" this program has no trouble at all decoding them. 

Lets say  you want to have multiple programs work together without a hitch.........

 3. Then LP Bridge or  VSP manager come to the rescue. These are free programs and will allow your computer to set up virtual ports thus having multiple programs working at the same time and talking to each other. These programs work like a dream and as far as my needs go no bugs at all.

4. If you are into the digi modes like I was and in the near future hope to be there is a free program called Quickmix. This program will remember all the audio settings you use for each digi mode, so for example when operating PSK and you want to now switch to WSJT-X which has new audio settings for you PC. You no longer have to remember them Quickmix can in the blink of an eye adjust the sound card to the new settings for the selected digi mode!!

I told Oliver (A.K.A RF) sleep is for after the contest

I always look forward to the IARU CW contest each year, I find it is just the right length and lots (most of the times) of DX to be had. This year I entered as Single op, QRP power, all band. Last year's IRAU contest I was QRPp for most of the time making some very amazing contacts and breaking my all time miles per watt record. This year it was tough going and then only having 5 watts as well made things more of  a challenge.
I found the bands during Saturday morning and afternoon were really only open to the U.S. There was  very occasional openings on 10m and 15m. It seemed 20m was the way to go and I found myself just checking 10 and 15m now and then . I did have what I considered a DX contact during the afternoon which was Mexico! Pretty sad for that being my early afternoon DX!!
The solar conditions were not to bad considering how the last few weeks had gone for solar flares and high K index's. As the afternoon wore on 20m started to have opening to Europe and South America. But again with only 5 watts it was a challenge. As the evening rolled around 40m was busy with lots of action. Europe was booming in but for some reason I have always had it tough on 40m. I am not sure why but the U.S has never been a problem but getting over the pond has been frustrating. Having said that I did make it into Germany, England, France and Italy. I was very surprised but did have to make many repeats and I got the feeling I was just making it over there.
My score is as follows.
144 contacts
23   HQ stations
21   ITU's
Overall I had a blast and again am looking forward to it again next year.

QRP at Luther Marsh... note one of Julies cameras

On Saturday morning Julie and I decided to take a hobby trip (Julies photography and my ham radio) we were off to a place called Luther Marsh. We have never been there before so we Google mapped it and off we went.....what could go wrong.....LOTS. This was a place that Julie was recommended to go by some bird watchers. It's about an hour and a half from where we live but they say getting there is half the fun.....and boy was it. Our trip according to Google maps brought us zigging and zagging all over the map. Once the road adventure was done we ended up on a lonely dirt road with a gate saying " DO NOT ENTER" Hmmmm it was time to bring out the Iphone GPS and find out where the heck we where. Well it was about another 20 minutes of driving  and we did arrive at our destination. We loaded up the camera and ham gear into our "hobby stroller" and ventured down a path in the wildlife

A view from below

sanctuary. We were not alone on the trail it was me, Julie and 

Julie's shot of the day an Osprey

deer flies!!!  We did have bug repellant  but it just had no affect on them at all. I was not bothered but poor Julie had at least 10-15 buzzing around her head all the time....and biting her!! We turned around and decided to call it a day, on the way out we noticed a path and this path lead to a lookout about 3 stories high. We went up to have a look and low and behold no deer flies. We had our lunch up there and Julie was able to take pictures and I was able to have to some radio time.
I took with me my Elecraft KX3, Alexloop, tripod and a spare battery. It was great, there was no noise level at all on the KX3 and one would wonder if the rig had a receive problem. I started to call CQ and it was not long before VE1AB in Nova Scotia  came back to me. John gave me an RST of 559 and we had a nice long CW chat it seemed that John had been to Luther Marsh several times when in Ontario.  I did have to say 72 to him as my batteries had to be changed in the KX3. I then called CQ again on 20m and WW2SUB came back to me.......hey guess where he was???? This was the first time EVER I had contacted a Submarine . He was on the USS batfish. I thought my CW was off and it was supposed to be copied as battleship. When I got home and did a QRZ.COM search....it was in fact called the USS Batfish!

Camera and ham gear stroller (mainly camera gear)

Over the past few days if not weeks I have been getting updates on my Iphone of the solar conditions and it seemed solar flares were a dime a dozen!! Here at VE3WDM it's QRP all the way and max power is 5 watts. This evening I turned on the K3 and was not expecting to hear all that much and maybe just log some "local" QSO's. I was able to hear S573DX  and he was about an S9, I tried to make the contact using 1 watt but was only met with "VE3?" I then doubled the power and that did the trick with 2 watts for a 5NN and 2,222 miles per watt contact. I then spun the dial again and came across H70ORO from Nicaragua and was able to work him with 3 watts. I have for some reason always had trouble with South and Central America from my location but was thrilled to work him with only 3 watts for 729 miles per watt. That's not bad at all considering that part of the globe on a real good day is very hard for me to hit with a contact. Finally I was able to just at one point pick out Z33Z from the noise floor but as I was writing this post and listening Z33Z from Macedonia became an S5 signal. I decided to crank the power to a full 5 watts and give him a go. I made it but with a few repeats and Z33Z is in the log. That was it for the evening with ham radio I was very happy with the contacts that were made.
YOU GOTTA LOVE QRP!!!!