AmateurRadio.com

The CQWW DX CW contest was a blast and before the contest I did some thinking as to how I could best take advantage of the computers that I have at VE3WDM. I brain stormed the week before and came up with the idea that my main desktop PC would run my K3, logging program and propagation stuff. I could use a net book laptop to look at QRZ.COM, email and so on. So it was decided one monitor would look after the main PC "stuff" and the other would be hooked up to the net book and run the other "stuff". This plan worked great and I
was able to multi-task during the contest between two computers using two nice LCD monitors. The next day after the contest the net-book was snuggled in it's case and it was time to use

During the contest with both monitors

both LCD monitors on the main PC as it always had been done....As the PC booted up the one monitor display read "not connected". I then preceded to connect reconnect and change out the video cables but nothing had worked. I was still getting the "not connected" message floating around. I then in WinXP had a look at my video card. Maybe I just had to tell the PC to recognize the other monitor again. In the process of trying a dual monitor setting I did not read the warning that was counting down from 15 seconds. I just said "ok". Well now both monitors were blank with the message "not connected" Well that went well!!! It was off to Google to solve my troubles. Seems the net-book could had changed the monitor refresh rate and or resolution settings. Settings the main PC was not able to recognize and thus the message "not connected". According the the advice derived from Google searches I have to boot in VGA only mode. It was simple, I was told "wait for the Windows logo to appear and press F8". Easy if both monitors were not blank!!! So began the many restarts guessing when to press F8. Well in time I was successful and was able to get into VGA mode and repair both monitors. All is working well now and lesson learned. It turns out the net-book changed both the refresh rate and the resolution.

Well those of  you who are waiting for the Elecraft KX3 to go on sale have been given a tease.....there is a download of the control panel now available!! Looking at this gem will help sooth the wait for the unit to go on sale. So put the kettle on for some tea, sip and enjoy the first KX3 PDF  I am at this time not getting one but the PDF info is just GREAT!!!

I have been debating this one for a long long time and that is do I or don't I want (want not NEED) the Elecraft P3 pan adapter. There were two factors that drew me away from this unit, the price and the size of the screen.
Well I have sold some unused "stuff" here at VE3WDM so the funds are there. I contacted Lisa at Elecraft and I was told that in a few months there is a board coming out to put the P3 video up onto your monitor along with other goodies that it can do as well. For example decode on the monitor CW, RTTY and PSK31 to name a few. So
 on Friday I called Elecraft and sealed the deal. I hope it comes in time for Christmas and in keeping with tradition I ordered the kit version!!

Contest time

Well another CQ WW DX CW contest is in the books here at VE3WDM many out there who participate in contests like to set goals. I'm no different but before I set my goals I like to make sure I understand reality first. I am never going to win in these world wide contests I just don't hang in there long enough to get a world class QRP score going. Also I just don't have an "out of this world" antenna setup, I am running with an indoor attic fan dipole. So with that understood my goals for this contest were as follows...
1. Relax and have fun contacting hams all over the world.
2. Run most if not all the contest QRPp at 500mW's.
3. As I finish a contact check out the ham on QRZ.COM and learn about them and their station as I cruz for another contact.
4. Beat my miles per watt record of 8325 miles per watt.
5. Try to beat the 300 contact wall.........never stood a chance as I was doing to much of goal number 1 and 3!!!

I got a late start on Saturday around 10:30 a.m local time, yes the contest did start on Friday but that was dinner and a movie at home with Julie. I was very impressed  how open the bands were like 10m and 15m's those two bands were my staple bands for the whole contest. Below is a highlight of the top contacts for the weekend all with 500mW's.
contact                     Miles                Miles per watt (.5 watts)                  Kilo's


1. ZS4TX                 8368                16737.20                                        26935.91
2. EM2T                   4742                9484                                              15263.91
3. 4O3RR                 4695.2             9390.32                                         15112.26
4. IR8C                    4568                 9137.34                                         14705.12
5. HG1S                   4415                 8831.18                                         14212.41
6. 9A1P                    4360.22            8721.85                                         14036.46
7. S50K                    4358.0              8717.05                                          14028.74
8. IR8C                     4290.22            8580.43                                         13808.86

Keeping track of mileage

 Over all I made 106 contacts out of that 84 contacts were made with 500mW's 21 with 5 watts and one contact on 40 meters with 50 watts. It seems that on 40m I just was not cutting it and to make a contact I had to raise the power to 50 watts. So that was the last contact on 40 meters. As for beating records I was thrilled to contact ZS4TX which got me 16737.20 miles per watt!!!!! Not only that in this contest I was able to make 30 contacts that topped my 8325 watt per mile record. Now running 500mW's did bring my QSO count down as there was lots of repeats I had to do. I just want to thank the op's out there who stuck with me and asked over and over again for my call instead of just moving on.

Earlier I did say that I was never going to win a contest but in closing I have said this before in the blog..............there should be a QRPp category. There is QRP but running 5 watts is  different from pumping out Milli-watts. Well change does take time and maybe in time there will be a spot just for QRPp. 

        106                                             77                               23,408

The Elecraft K3 in action

It was a  late start to the contest it was  10:30am local time Saturday when I got into it and the bands were just hoping!! I started on 10m and over the coarse of the day just jumped between 10m and 15m. In the past 20m was the staple for me and most of the contest I would just camp out there. So far in this contest I have not even seen 20m as the other two bands were great with DX. I am operating 99% of the time QRP at 500Mw's. I am very surprised at the results and how far such little power can go from my attic dipole. Now and then I would pump the power up to 5 watts if I they were having trouble making me out. Now running this low of power does mean lost of repeats on my part (thanks so much for all the op's and their patience) so my QSO rate is really down. I did try 40m this evening but it's very busy with station that are running loads of power. The one station I did contact in Europe I finally made it to him at 50 watts. That for me is WAY to high as far as power goes I am just not sure at that level if I would am causing any interference to neighbors electronics. So I just shut things down for the night and am hoping to get on Sunday nice and early and take advantage of 10,15 and possibly 20 meters. Hope to see you in the mix up!!!

This week has been dedicated to setting up for the CQ WW DX CW contest this weekend. Making sure the contest logger works (N1MM), try out the CW macros along with the K3, test out the antenna on all the bands and finally make up some goals. I find by doing some prep work before the contest Murphy does not rear his head as often during the contest. Early last week my Tigertronics Signalink USB came in and it was my ticket to get into the digital world. Years ago I had a Yaesu  FT-1000MP MKV I had the Rigblaster Pro along side it. I dabbled in PSK and was into RTTY contesting at that time. I had hopes of setting things up and getting on the surf board of Digital communications last weekend.
Well that dream was short lived, the memories came back of sound card setup, adjusting the ALC level and basically getting everything just right for the digital engine to purrrr. Over the weekend the setup was not purrrring at all it was more of a hisssssss.  The connections between my K3 and Signalink were smooth going. The PC recognized the on board sound card in the Signalink. At first I ran into some trouble setting up the CAT connection between the K3 and software  (Ham radio delux's digital master 780) I was able to decode PSK signals with Digital Master, in transmit with the K3 set at 100 watts I was able to use the TX control on the Signalink to raise the output power to what I wanted (5 watts). The unresolved problem is I am not able to get any ALC reading on the K3. I know the ALC is very important to a clean signal. I have given up trying to solve this problem at this time. I am as I said concentrating on the CQ WW DX CW contest. 

I have a Toshiba A300 laptop in which most of my blogging is done on. The only trouble it gave me was  for some reason the HD failed. Not a problem it was sent in for repairs and came back with a new HD and it's been fine ever since. The operating system is the 64 bit Vista. Now this is another story  I found it took forever to boot up. I am talking about 3-5 minutes to get to the point were I was able to use the laptop. It would also stop and think every so often and I would just have to sit and wait. Shutting down was no problem that was done in under 30 seconds. To remedy this problem I tried just about everything and it just did not seem to do the trick. On the home P.C I have WinXP and have had no troubles with it at all. It runs smooth and does not get hung up. These are the only two Windows operating systems I have had really any exposure too.  As for the Laptop I was either going to re-install Vista, try loading XP or do the radical and go with Linux!! I was not sure how XP was going to work out on the laptop and figured Vista was just going to act the same way.  So that idea was put  on the back burner, I noticed on the Internet that Linux Ubuntu
could be loaded on my laptop along side Windows. Kinda have two OS's on one machine. Now I am not a fan of doing this for the long term and I don't think it is meant for that. It was a way of  test driving Ubantu 11.10 and see how I liked it and how the laptop liked it. An installer called Wubi allows you to install Ubuntu on a Windows machine.  If  you don't care for Linux it can be removed also using Wubi. If you want to go ahead and install Linux Ubuntu using Wubi just follow the step by step instructions   found on the Internet. There was no need for any fancy computer whiz bong knowledge it was similar to installing any windows program. Before you know it Uantu was up and running and each time I started the laptop I was asked if I wanted to load Windows or Ubuntu?? The first thing I noticed was it sure did load  faster than Vista and that was a BIG plus. For a few days I gave Ubuntu a test drive. I had only done things the Windows way so the desktop and how programs were launched took some getting used to.  I kept reading "take time to get used to Ubuntu it's not Windows" I went to YouTube to check out some tutorials on the operating system to learn more. This was were I thought I ran into my first Ubuntu troubles. At YouTube I was greeted with the messages "Adobe flash is required to view YouTube" The flash upgrade was painless and was a matter of just clicking on a link. The needed update was downloaded and installed then YouTube was up and running.  After playing with Ubuntu for a weekend it was time to take the plunge and remove Vista and do a perminant install of Linux Ubuntu on my laptop. There are step by step instructions for this as well on the Internet.  So after a week what is my impression of Ubantu....it's loads in 20 seconds compared to Vista's 3-5 minutes. It comes complete with a word processing program, spread sheet, a power point type program, workspace switcher were you can have four windows going at once and switch between them. You can run windows programs by using a program called wine. I have not venture down this road yet. One thing I did notice was it eats up the laptop battery time but there is something out there in Linux land to help that along. As times goes on I will continue to learn more. Have not tried it yet with any ham radio programs but my laptop was never used for that.