ARRL DX Contest

Once again, and especially in a contest like this, I resumed my role as a “GOP” – giver of points.

I went into the contest with several goals in mind, one of which I did not accomplish. But I’ll save that one for last.  The vital statistics are such that in about an accrued (approximate) 5 hours of operating time, by cherry picking, I made 69 contacts and of those, I worked 39 different DXCC entities.  Hence, my earlier post that if you are just embarking on your journey towards DXCC, this is a wonderful place to start.  In only five hours, I got 39% of the  way there.  If you could devote even more time, there’s no reason that you couldn’t end up 1/2 to 3/4 of the way there – even with “average” antennas.  If you are fortunate to have a directional antenna? I think you could complete DXCC in one weekend, if your butt can stand a stint in the chair for that long.

My first goal was to really check out the legs if the KPA3 that I recently installed in the K3.  “What?” you say?  “A 100 Watt Amp in W2LJ’s QRP rig?”  Yes, but don’t get all crazy on me, there’s a method to my madness.  I am a dedicated QRPer; but I also like to work DX.  I am currently at about 140 DXCC entities worked. When I hear a new one out there that I have never worked before, or there’s a DXpedition to an entity I never worked before, my goal is to get them in the log – period.  My theory is that if I know they’re in the log, then the pressure is off and it will be easier to get them via QRP.  And if I shouldn’t be able to work them QRP – oh well, them’s the breaks, but at least I have them in the log.  When it comes to DX, I am definitely NOT the caliber of someone like Dan WG5G (who should be in the QRP HOF, by the way) who is in the DXCC Honor Roll – all QRP.

All that being said, using the 100 Watt setting on the K3 was like shooting fish in a barrel, in most cases.  If I was able to hear ‘em, I was able to work ‘em.  Comforting knowledge to have in the back of my mind when I’m fighting it out in a DXpedition pile-up, even though I know that in those circumstances, maybe even 100 Watts might not be enough!.  But getting back to matters at hand, I now know the 100 Watt setting works well.  While it was fun to bag countries like that in one shot, the same thrill and satisfaction of doing it with low power wasn’t there.  It was fun, neat and cool; but it wasn’t quite the same. So in the end, the 100 Watt setting will not be the norm for W2LJ – the 5 Watt setting will continue to be my normal state of affairs.

I also wanted to try and work a few countries at QRPp power and I did – among them being Bonaire, Brazil, Martinique and a few others.  QRPp was anywhere from 100 milliWatts to 900 milliWatts. Depending on how strong the station was on the receiving end, determined how low I turned down the power.  It was fun, scads of fun, but I doubt I will ever be on par with the like of George N2JNZ who has DXCC using milliWatt power.

Antenna comparison continues to be one of my goals and practices.  Which antenna works best and where. I spent the overwhelming majority of my time on 15 and 10 Meters, but when I went to 40 Meters for a brief stint on Saturday night, the Butternut HF9V turned out to be the best arrow in my quiver in a few instances.  I would have thought the wires would have been the best choice, but the Butternut got me through when the wires weren’t.  Lesson learned – I HAVE to get more radials down this coming Spring/Summer!

My biggest disappointment was that in the time I was on the air, I didn’t hear any VKs, ZLs or anyone from Oceania (besides Hawaii, which I worked).  I was hoping to try getting someone from that part of the world via QRP – but no dice.  I was looking for them on 15 Meters; and I got an e-mail this morning from my friend Bob W3BBO, that he was able to work them on 20 Meters last evening as the contest was nearing its close.  Once again, W2LJ was at the wrong place at the wrong time, my conventional wisdom let me down, once again.

I wish I could have dedicated more time than I was able to.  But at the same time, I was lucky to put in as much time as I did.  Due to pre-planning, I was able to avoid some routine chores by getting them out of the way early.  It was a lot of fun and I had a blast during my time behind the key, and that’s the main idea behind all this anyway, isn’t it?

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

2 Responses to “ARRL DX Contest”

  • Tom KB3HG:

    Larry,
    Just be glad that you are not teased by its not a radio unless it glows. Don’t get me wrong but a simple tube rig is nice on these cold nights. Enjoy the amp for DX. I had a buddy SK now that would not buy an antenna until he had WAS CW on Dipoles first. Boy did he have fun. I hope you do the same.

    Tom

  • LarryW2LJ:

    Tom,

    Thanks for reminding me! I have a 40 Meter Glowbug sitting in a box that I need to build. ;)

    73 de Larry W2LJ

Leave a Comment


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter
News, Opinion, Giveaways & More!

 
We never share your e-mail address.

Also available via RSS feed and Twitter (@amatradio).


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.

InnovAntennas/Force12
Ni4L Antennas
Associated Radio
Aspect Solar
GigaParts
American Radio Supply
West Mountain Radio
N4PY Software
N3ZN Keys
Georgia Copper
KB3IFH QSL Cards
DX Engineering
Austin Amateur Radio
BuyTwoWayRadios
Ham Shirts
Hip Ham Shirts
R&L Electronics
Win4K3 Suite

Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!