Yet another new rig!

Say what you want about Facebook; but you can use it to keep abreast of new QRP gear.  LNR Precision, makers of the wonderful ENDFEDZ antenna series is announcing the availability a new tranceiver – the FX-4, which was first announced at Dayton.  According to their Website, it will be available soon for purchase, at around the $500 neighborhood.

Kinda resembles a small KX3, eh?  🙂

Here are some specs:

Transceiver size in inches.          4.10 length X 2.8 inches width X 1.5 inches in thickness.
Weight of transceiver                 12.8 oz.
Current Drain on receive             250-270 ma
Current Drain on transmit           1200 ma
Bands covered on receive           7.000.00 to 7.300.00 meters
14.000.00 to 14.350.00 meters
9.999.00 to 10.150.00 meters
18.068 to 18.168.00 meters
Bands covered on transmit        same as above
Frequency control                     75 MHz
Display type                             LCD-128×64
Transmitter Max output power    5 watts CW 5 Watts SSB
Spurious emissions                   -43dB at 5 Watts
Side tone pitch                          550Hz to 1500Hz adjustable
Receiver sensitivity                    0.3uV
Selectivity                                 -3dB/ 2.6K -40db/ 4.5K
Audio Output                            1 Watt with 8 ohm speaker
Keyer                                       Iambic A & B adjustable speed from 5 to 40 wpm.
Memory Storage                       10 per each Band total of 40
DSP filtering                             300Hz, 500Hz. 1.3Hz, 1.6Hz, 1.9Hz, 2.2Hz, and 2.5Hz.
VFO Drift                      <5Hz after 5 minute warm up at 30c (<10Hz after 30 minute operation @  40c)

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

3 Responses to “Yet another new rig!”

  • Ted KA8SEP:

    Um, Larry,

    7.0 to 7.3 METERS?!?

    I guess you are really excited about this radio. 😉 It’s all good. To err is human, to really FUBAR everything you need a computer…

    Ted

  • Larry W2LJ:

    Ted,

    The data was obtained from the LNR Website.

    It’s quite obvious that they meant MHz, eh?

    Larry W2LJ

  • Kyle N4NSS:

    For TWICE the money you get a KX3 and 10+ times the rig!

Leave a Comment

Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter
News, Opinion, Giveaways & More!

E-mail 
Join over 7,000 subscribers!
We never share your e-mail address.



Also available via RSS feed, Twitter, and Facebook.


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.


Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!


  • Matt W1MST, Managing Editor




Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: