AmateurRadio.com

Ready for inspection

The MFJ 1788 antenna has arrived I ended up ordering it from DX Engineering and cancelling the order at the local ham store. DX Engineering had the antenna in stock were as the local store was not able to tell me when the antenna would be in….it seemed to be a waiting game. Once ordering the antenna DX Engineering had it at my door in 3 days! I can't say enough about the great service that was provided by DX Engineering. Now having said that……..I have been doing a lot of online reading about 1788 loop and how over and

Capacitor

Control box test

over again they arrived damaged or just not working. Looking at the loop it seemed to be in great shape and externally survived the trip ok. As I looked at the control unit I found one of the  push buttons not working! The  range button that changes the meter from low to the high wattage scale . I opened the control box as I also heard some "rattling" noise from within the unit as well. I found the switch to be defective and in need of changing, the rattling noise was from the battery holder. It was only held in place with two-side tape and as you guess it….there was no holding left on the tape. At this point I had a choice to make:
1. Send the control box back to either MFJ or DX Engineering for repairs?
2. Ask MFJ if it's possible to make the repair myself if they were to send me the part?
I settled on option 2 as I could still use the control box until the switch arrived and not be put on hold until control box was repaired or replaced. (note: I purchased DX Engineering's last unit)

Stepper motor

The control box failed the QC check it was now time to open up the antenna (a must according to magnetic loop user group) The visual inspection looked very good now time to power up the antenna with the control box. With the cover still off the 1788 loop I wanted to make sure the internal capacitor moved freely and stopped when full rotation was reached in both directions.
All was going well until the capacitor was rotating counter clockwise and it just stopped! I then rotated the capacitor in the clockwise direction and back counter clockwise and it worked just fine. After many back and forth rotations the capacitor never acted up…..maybe this was a one off. I emailed MFJ regarding the switch and they are going to mail one to me so I can do the repair. Next is to mount the antenna and see how it performs stay tuned!

A shot of the loop with the "T" fitting

I have been looking for a way to place the Alexloop  in the horizontal position as from my playing with the loop it seems to work better for me on the balcony in the omnidirectional horizontal position. Yesterday I was able to pick up a 1 inch "T" fitting mainly used for piecing together plastic pipe. I was able to feed the loops center support through the "T" fitting and place it nicely on the tripod. With just a little electrical tape to hold it in place it worked great. 
I finally set things up to get  WSPR up and going, so yesterday during the day and then into the evening I was WSPRing to see how my signal was getting out from the condo. Up to this point I have only used the Reverse Beacon Network or RBN which involved CW at 5 watts. I was not thrilled with the results and was really wanting to give WSPR a go. During the day I tried 10m and 20m I started out with 1 watt and in terms of WSPR that is some pretty high power. The antenna once again was the Alexloop in the horizontal position, at first attempt on both bands the Alexloop was indoors. It was not surprise that there were no spots at all it was time to move the loop out onto the balcony. Once setup I went back to 10m and it was about 2pm local time with no results again. I then jumped over to 20m and it was just U.S stations and very few I might add that received my signal. It was time to pack it in for the afternoon and some chores had to be done and I would get back on in the evening hours.
At 7 pm local time I was up and WSPRing on 40m and with great hopes as the band sounded good and I was decoding some WSPR DX such as EA3NEI. I once again was only heard in the U.S and this time I used up to 5 watts!! Maybe it was that conditions were poor out this way as they have been over the past week. Over the weekend if I get time I am going to give WSPR a go once again and see how it works out.

The loop horizontal and nothing.

In my last post I wrote about how my Alexloop was just not getting out in the condo, I was checking the Reverse Beacon Network as I called CQ at 5 watts from my condo and there was ZERO spots! Well from that post I received lots of great suggestions on how to get VE3WDM's signal from the antenna to the world. So here is what I tried........I mounted the Alexloop in the horizontal position in the condo and it netted no spots on the Reverse Beacon Network. I then put the Alexloop on the balcony seeing that we are 60 feet in the air I felt this was a sure thing. The last option for me was to place an antenna on the balcony as it was open season to the condo cops.  I placed (in the cover of darkness) the Alexloop on the balcony and called CQ on 20m and 40m and then check the Reverse Beacon Network. To my surprise there were no spots and now I am really stumped and frustrated. The Alexloop is out in the open 60 feet in the air and no spots what the heck is going on......do those dam condo cops have ham radio jammers!!!!!! Up to this point I have only use the RBN to check for spots but there is also WSPR and I have had some bloggers suggest I use this. At this point I am not able to get WSPR up and running as there seems to be some software issues. My goal now is to sort out the issues and give WSPR a go both with the Alexloop in the condo and out on the balcony. This coming weekend I hope to get on the air with WSPR and give that a go! Im really not frustrated I see this as a challenge, for me to get ham radio on the air from a condo will but only  help others in the same situation as me get on the air.

Things are coming along

The boxes are slowly getting unpacked and things put away, the roll top ham radio shack is taking shape as well. I found I had a lot more gear than there was room for in the condo and may have to shed more gear! At this point there has been some bumps in the radio setup but all seems to be slowly coming together. I can't believe all the cables that are involved in having the radio talk to various hardware components. There has been one major mystery I am not as of yet to solve.....I have setup the Alexloop and added the K3 to the mix. I was able to get a great SWR and surprisingly a low to moderate noise level...BUT.....I was calling CQ on different bands with 5 watts but was not once spotted on the Reverse Beacon network. Hmmmm I then went "simple" I hooked up the KX3 to the Alexloop and again calling CQ at 5 watts was not spotted at all on the Reverse Beacon network????? I have tried to move the Alexloop closer to the window and the balcony door, the only thing that happened was the SWR was very hard to adjust on the Alexloop. I then move the loop about 4 feet from the balcony door and the SWR was great but no spots?
My setup is a stealth operation and really can't put the Alexloop on the balcony but I am 6 stories up and back in the townhouse I did have the Alexloop inside and it did very well so at this point I am stumped.