Fred and Yimin of Youkits

When I attended Maplecon I recorded at conversation I had with Yimin and Fred, VE3FAL, of Youkits.  I have turned that recording into the first VA3STL podcast.  I am making it only available here for the time being.  If I make any more audio podcasts I will think about putting them on iTunes. Please click on the link that follows.

VA3STL Podcast#1 Conversation with Youkits

As the podcast is something new to me and an experiment, I would appreciate any feedback via a comment, or direct e-mail.

Youkits TJ6A transceiver

The Youkits' demonstration shelter

I attended the first Maplecon last weekend, which was a gathering of Canadian QRPers. The venue was Emily Provincial Park campground. Gerry, VA3GLT, and myself headed down on Saturday morning, despite the convention’s start on the Friday, as both of us had commitments in the afternoon and evening of Friday 20th Aug. We had an early start and drove down the 401 highway to Port Hope then turned off and travelled North to the park. By noon we arrived and had put up the tent and an antenna.

The campsite. Notice that vertical antennas on poles were popular

The antenna for this event was a freshly homebrewed doublet made from some TV twin-feed I bought a few years ago and now decided to use.  It was split 16′ 7″ down to form two arms of the doublet, and the remaining 23′ or so of twin feed was the feedline.  At the end of the twin feed we installed a homebrew 4:1 current balun, which I had built a few years ago.  The antenna was raised between two trees high enough that the feedline dropped vertically down and just reached into the tent.  A short run of coax was used from the balun to my Elecraft K2.  It tuned on 40m, 20m, 17m, 15m and surprisingly 80m (given the length of the antenna is would be a pretty inefficient).  I could not get a tune on 10m. Possibly if I took out the 4:1 balun I may have made it.

There was a just short of thirty attendees at the convention and we chatted with quite a few.  There were three tables set out as stalls, one with QRP rigs, one with QRP-ARCI information and one with Youkits radios.  I would have like to have spent more time looking at the QRP equipment table, but things felt a little rushed as we had arrived late.  We had a lovely barbecue lunch prepared by Jeff, VE3JFF, and his family after which I had a chat with Yimin and Fred, VE3FAL from Youkits about their new line of QRP radios. That will be covered in a future post as I made a recording of that conversation.

Youkits' HB1A

There was an antenna competition on so I spent a little time in the tent in the afternoon trying to make contacts on PSK31.  Beside the antenna and the K2 I was using a little Asus notebook, a homebrew interface for digimodes and a large battery pack.  It is so large that Martin, VA3SIE accused me of being a secret QRO operator!  (That hurt Martin).

I had little success with contacting stations on 20m PSK until finally just before dinner when we made a contact with a weak station that was calling CQ.  I replied and was acknowledged by Mirek, SP9ONC in Kozy, Poland.  He was running QRP from a TS-2000 and and we exchanged details. I was really pleased that my first contact was DX and a QRP-QRP contact too. Soon after came my second contact Fred, KD8AQ in Mt Pleasant, TX and we had a nice chat.  As the call for the chilli dinner had gone up earlier I had to break off that conversation.

Dinner was provided by the Ottawa Valley QRP Club and that was the second good meal.  The chilli was tasty and Martin, VA3SIE,  had brought some British delicacies for dessert, including Battenberg cake, which I had not eaten in many years as  it does not often appear on shelves in Canadian stores.

After dinner there was the antenna competition, door prizes and a raffle for a ‘shack in a box’.  For the antenna competition Michael, VE3WMB, won the prize for the best technical design with a folded over vertical antenna, and I won for the best performing antenna with the DX contact with SP9ONC.  I was extremely pleased to find my prize was a Norcal BLT tuner which will very likely become the tuner for that doublet in future.

There were plenty of door prizes including several transceivers.  Gerry, VA3GLT, was lucky to get the first of two HB1A transceivers that had been generously donated by Youkits.  There were so many door prizes that I think all attendees went away with something.  I won a set of pliers and a year’s subscription to QRP Quarterly, the QRP ARCI’s excellent magazine.  So when my current subscription is up I can use that.

The 'shack in the box' prize is presented. The prize was a transceiver, battery pack and case.

After all the prizes had been given out there was chatting into the evening and then Gerry, Martin and myself went back to the tent and made two more contacts on 20m. These were Tom, KJ4QDZ , in Lillian, AL and Virgil, WA5TLP, in Willston, ND. Not too many contacts but enough to make me happy with the performance of the antenna.

Yimin of Youkits chatting with Gerry, VA3GLT after the prizes were awarded

Over Saturday night and Sunday morning there was a lot of rain.  So after breakfast next morning there were a lot of people leaving.  Gerry and I thought it was prudent to take the tent down during a brief lull in the rain so there was no making contacts, just collapsing and packing a wet tent.  We thanked Jeff, VE3JFF, for all his hard work that had resulted in a successful first Maplecon 2010, said goodbye to those that remained and we headed home before noon on Sunday.

Will there be another Maplecon next year?  Well after the prize giving it was discussed by all and it was unanimous to have another.  So here is looking forward to Maplecon 2011.

Welcome to Handiham World!

Telling the story: Mike Runholt, KC0YFV, on ARRL website

Photo: Mike, KC0YFV, left, and Bill, N0CIC, take down one of the wire antennas following a memorable radio camp session at Courage North. This radio camp was the last of a long run of week-long camp sessions at the Courage North location. In 2010, the radio camp session moved to Camp Courage, about 40 miles west of Minneapolis, Minnesota. Courage Center owns both camps. The Handiham System headquarters is at Camp Courage.

Mike Runholt, KC0YFV, has written an excellent article about the Handiham System and Radio Camp. It appears this week on the ARRL website. You can reach Mike at his callsign at ARRL.net if you wish to comment on the story.

“The pontoon slowly motors around the lake. A group of hams gathers around the radio. “CQ, CQ 80 meters this is W0EQO, KC0YFV at the mike, maritime mobiling from Courage North in Lake George, Minnesota, over.” So begins a typical contact at the Handiham Radio Camp sponsored by the Courage Handiham System, a program of the Courage Center. You have probably seen our quarterly ad in QST and wondered what we do.”

Read the entire story on the improved and newly-redesigned ARRL website.

Our thanks to Mike for telling the Handiham story so well. Good work, Mike! And, hey, Bill, you look good in that photo, too. Are you the wire tangler or the wire untangler?

This is the first of a weekly (Lord willin’) post of some of the lessons learned in the last week of playing radio in the field and on the workbench. I will be sharing my good and some of the not so good lessons with ya so ya don’t fall into the same holes that I have.

Our monthly Polar Bear QRP Club outing was last weekend, and I hustled to put together a new C Pole antenna using Niel W0VLZ’s description. After gathering all the parts I set about preparing them. With the 100F temperatures and high humidity, that was a chore since I don’t have a garage with my condo and use my back porch as the workshop. I also have a less than full set of tools and to trim the 3/4 inch PVC pipe to fit the bases of the 16.5 ft Black Widow Crappie poles I had to resort to my Buck knife.

LESSON: Plan ahead and borrow the tools I need!!! YIKES.

I was a bit surprised how heavy the treated 1×4 lumber was. It certainly is not an antenna that is well suited to portable ops where it has to be carried very far.

LESSON: Think about how something is to be used BEFORE using it!

Got the C pole components loaded into the car and transported to the nearby lakeside park in our development. It is a nice quiet spot with towering pine trees and without too many curious visitors, so its a nice QRP portable site. Got my new Coleman shelter set up and went to work on the C Pole. Oops… another lesson. In preparing the PVC to fit into the crappie poles, I only tested the two pvc poles fit into ONE of the two crappie poles. After lugging the framework, antenna wire, coax, balun,  and poles about 100 yds to my site, I discovered crappie pole #2 had a big drop of fiberglass inside the open end of the pole and the PVC would not fit at all.

K4UPG Polar Bear Site Aug 2010

C Pole Aborted Setup by Ninja wannabe K4UPG

LESSON: Check ALL the parts and do a trial setup BEFORE lugging the stuff across the wet grass and wasting time attempting to set it up.

LESSON: Don’t use a new antenna for the first time when the goal is get on the air and have fun!

For the Polar Bears, it was a frustrating weekend for most of us. Propagation was spotty and noise level was as high as the heat. At least I did reconnect with my antenna lovin’ PB friend Aaron, N9SKN/2 working from his hotel parking lot in NJ and had a couple nice ragchews including Julio NP3CW who was 599 and despite two guys calling CQ on top of us was able to be copied well. Great QRP signal Julio.

As you can see, I went ninja and tied a piece of old tee shirt around my head as a sweatband. Actually I was emulating our Alpha Bear, Ron WB3AAL after I read of his early Appalachian Trail exploits and saw a photo of him in his youth and ninja radio mode. Well I tied it TOO TIGHT and left it on TOO LONG and came home with a painful big red stripe on my forehead that lasted for several hours and hurt like all git out.

Ouch Head for the Web… Don't try this at home! Grrrrrrr!

LESSON: Baby Polar Bears should not try to be like the Alpha Bear and wear an unapproved homebrew sweatband. These can be hazardous to one’s health and well being. Don’t try this at home kids!

Beef n Pepper Jack Cheese Wrap K4UPG style

p. s. For our Summer Picnic Events, we are supposed to send a picture of our sammich that we have for lunch. So here is mine!

Until next time…

72,

Kelly K4UPG Polar Bear #173

Here’s an email from my good friend and cohort in the Central Florida QRP Group. Jim wanted to share his latest mods for the Rockmites and some thoughts on the NEScaf filter. I think you will enjoy his notes too …

Kelly,

I thought I would bring you up to date on my latest project. I just finished a Small Wonder 20+ and used it on the Flight of the Bumblebees. I found my earbuds a little weak on audio output and the IF bandwidth of the SW20+ a bit wide for my liking. I read the specifications on the NEScaf filter offered by the New England QRP group and decided that that would be the best solution to my problem and be usable on other radios as well. I ordered, built and installed the NEScaf board in a TenTec TG-24 enclosure. I tried it on the SW20 and it sounded like a viable solution.

The Rockmite and NEScaf filter in Ten Tec Enclosures

I also have a 40 Meter Rockmite in a TG-24 enclosure and decided I would see how well the RM/NEScaf combination sounded. The Rockmite, of course, uses a DC receiver and the bandwidth is determined by the upper response of your ears… My RM sounds like about 40 khz wide, hears the whole band for me as my response is in the upper tens of kHz. Yes, I know, at my age 69 it shouldn’t be but is. Been tested. At any rate suddenly the Rockmite bandwidth is manageable. I had some audio artifacts, whistles and the RM sidetone would drive the NEScaf into cutoff which only a power cycle would clear. I googled the problem and Charlie KE2SP advised lowering the NEScaf input Z with a 10 to 47 ohm input load. I installed a 27 ohm resistor on the input connector and suddenly all artifacts, whistles and sidetone problems disappeared. WOW, the RM is really sounding great! Except the RX/TX was very low. I measured it at 500 cycles and the NEScaf would not tune down that low…

Closer Look at the Finished Rockmite and NEScaf

After considering several approaches to the problem and considering that the RM crystals don’t oscillate on exactly the QRP frequencies, I settled on completely revamping the RX/TX method used in the RM. Using the RM40 as a test bed, I removed D5, D6, R9 and R10. I purchased 2 Murata trimmers( TZ03 Series) from Skycraft, our local Surplus emporium, and installed them in the holes for D6 and D5, R9 combination of holes. I had to cut a small run on the right side (antenna connector side) to isolate that pad from Vcc and jumper to two trimmers together… I also had to drill out the pads to accept the trimmer leads. The Fet Q2 does a great job in switching to second trimmer in and out for the offset. The alignment was not difficult but I recommend using a freq counter connected thru a times 10 scope probe to the physical top of R5 (base of Q5). Don’t have to key the Tx to see the freq… I set the trimmer in the D6 position for the higher freq (7.030750 Mhz) and the other trimmer for the lower frequency (7.030000 Mhz. The trimmers I use are available at Digikey. I used the Red colored model (4.2 to 20pf, N750) but the Blue colored (2.7 to 10pf, NPO) might have been a better choice. These guys are Digikey p/n 490-1971-ND and are $0.43 each… I also changed the RM40 volume control from an audio control (1 Megohm) to a RF front end attenuator control (1.5 kohm) and there is a noticeable improvement in the overload and broadcaster breakthru problem. I strongly recommend these changes. If you can build the RM you can certainly modify it… If you break it, build another… I plan to make the same modification to my RM80. (CLICK THE THUMBNAILS for larger view)

Rockmite Mode Closeup 1

Rockmite another closeup

The Inner Workings of the NEScaf and Rockmite

How did it work? Well, the RM/Nescaf stack is now a real radio not just a toy. I worked WD8MHT Raul in Waynesville, NC one morning this week and we had a great conversation. He was 569 to me and I was 439 to him. His TS570 was working hard but copied me no problem. The amazing thing for me was that there was a really strong signal at 700 cycles and Raul was about 200 cycles higher. I tuned the Nescaf center freq on Raul and sharpened the bandpass and turned up the volume and he was armchair copy the entire QSO… WOW, not a struggle… I have since used the NEScaf on my SW20+ and yes, it works great…

I have attached a couple of pictures of the stack and the innards of the RM for reference. The switch on the front is for a future expansion.

72

Jim

K4AHO

Now into the third week of my sabbatical, I am surprised how much I want to get out and operate my QRP portable gear. Guess I have deprived myself over the years of being a confirmed workaholic and avoiding time off, vacations, and time for my favorite hobby.

Grrrrr! The Polar Bears Are On The Loose!

This should be a good weekend for QRP portable. The Polar Bear QRP Group will be out for another Polar Bear Summer Picnic Event and Polar Bears from Spain to the West Coast of the US will be out looking for BSO’s. Grrrrr! I am PB #173 and we’re over 200 members now. With the new Twitter and APRS connections to QRPSPOTS.COM which also point to the excellent spotting site of K3UK with a section for FISTS/QRP Ops to spot and sked one another, there are plenty of ways to use technology to help find each other. Add in a few other contests and state QSO parties, and there should be some buzzing going on this weekend. Makes me wonder when the FOBB results will be announced! Buzzzz Buzzzzz

I’ll be out and if all goes well I will be field testing a new C Pole antenna based on the suggestion I received from Neil W0LVZ. I added some switchable capacitance to my BLT+ and have rewound the main toroid to see if I can push the range a bit more with it so will have a delta loop and probably my W3EDP in the air too. I love playing with antennas and am still amazed when the ones I build actually make contacts!

Give a listen for me on the QRP watering holes on 40m, 30m and 20m Saturday morning. I’ll be self spotting on QRPSPOTS and the K3UK sites to make it easier for you to find me. Let me know how my newest antenna is workin’.

72,

Kelly K4UPG

PB #173

Welcome to Handiham World!

Second remote base station goes into beta testing phase

With the addition of the W0ZSW remote base at Handiham headquarters, members now have a choice of two remote base stations. Users who have signed up for access to the “Handiham Remote Base” (W0EQO) will be added automatically to the list for W0ZSW, with the same password. The remote base concept has been gaining in popularity as more of us want to be able to use an HF radio without the need to drag along a lot of extra gear while traveling. Some users live in condos or antenna-restricted areas and simply want to expand their operating horizons beyond VHF and UHF repeaters. The remote base stations allow users to operate real HF radios connected to real antennas, and make friends far and wide on the HF bands.

The W0EQO station at Courage North, a Kenwood TS-480SAT equipped with the VG-S1 voice module, is preferred by our members who are blind. We have a Kenwood TS-570S set up at this time in the W0ZSW station at Camp Courage. The two stations are quite a distance apart, hundreds of miles, so they can be used at the same time with no chance of interference between the two. W0EQO is in the tall pines of northern Minnesota, near the headwaters of the Mississippi river. The location is a very quiet one, with little interference. We have reports of users making very successful DX contacts. The station operates on 80 through 10 meters. This is due to the capabilities of the current antenna, a G5RV, which will not tune on 160 or 6 meters. The W0ZSW remote base station has a 300 foot “W0OXB Special” antenna, up an average of 45 feet. This antenna covers 160 through 6 meters, including the WARC bands. The W0EQO station will hopefully get an upgraded antenna system later this year, bringing it more in line with the W0ZSW station for band coverage and performance. Camp Courage is about 40 miles west of Minneapolis.

The DSL internet service has given us a great deal of trouble at Camp Courage, so the W0ZSW station has been off line as much or more than it has been on line. We hope to remedy this situation soon, but I have been tied up in meetings and office work and have been running behind with this project. One other issue with the W0ZSW remote is that we do not have the frequency speech readout working. The TS-570 does have the VS-3 voice module, but apparently the software does not support the voice readout. It may be necessary to replace the radio with another model for which the speech output will work if we cannot find a solution for the TS-570.

Lyle, K0LR, and Eliot, KE0N, have been working with me on this project and we are anxious to get it out of beta testing and on the air for our users. Please keep watching the Handiham website and this newsletter for the latest updates.