Posts Tagged ‘6 and 10’

March 2013 6 and 10

It seems that whilst 6m is still a bit low on the G7KSE listening list (Nothing to do with it still being freezing cold here and me thinking its still winter) but others have had a bit more success. The latest 6 and 1o report has been uploaded here and is available.

New 6 and 10 reports

Martin Harrison, G3USF has provided another 6 and 10 report. Its a bit shorter than usual but we’re all blaming the conditions. It can be downloaded here

October 2012 6 and 10 report

Martin Harrison, G3USF has passed on the latest issue of the 6 and 10 report which is in its usual place. I hope you enjoy it and don’t get too jealous of Costas’ very full log

6 and 10 short report

The September 6 and 10 short form report has been compiled by Martin Harrison, G3USF and is available in the usual place

A couple of 6 and 10 reports

Martin Harrison, G3USF has collated a couple more 6 and 10 reports which he’s passed on to me. They are available at the usual place (here). Any feedback is always welcome so please don’t hesitate in getting in contact if you would like to add anything.

June 6 and 10 report and other bits

Martin Harrison, G3USF has sent me the June short form report from the 6 and 10 club. It is available at the usual place, here. I trust you find it useful.

Personally I have barely touched the rig over the last couple of weeks. What with a broken PSU and a phenomenally expensive replacement switch that cost me more to put it in the post than the switch itself. The cheeky monkeys also sent it second class post so they made a tidy profit on sending it as well as on the switch. Hmmmmm.

Once I’ve got the PSU fixed, hopefully this weekend then I’ll be back up and running fully, just in time for the poor band conditions I’m reading about.

On another note I’ve had a wrestle with the Raspberry Pi as have a few other hams and its been tough going. Being a computer half wit I can’t really programme so I’m attempting to convert the little knowledge I have into making applications like Xastir run on the RPi. I’ve managed that but can I get the maps to work. Well simply, no I can’t. Still as a digipeater it has the potential but it needs a bit of extra hardware to accept audio in. Currently the board does audio out but not in. I expect that as time does on the platform will get developed further and bits and pieces will be produced in a similar fashion to the Arduino. At the moment its a bit like the wild west.

I should really spend the time fixing the PSU rather than playing with the RPi. That reminds me I need to fix the bike as well.

6 and 10 again

Martin, G3USF, has been busy collating the outstanding short form 6 and 10 reports and they are available in the usual place. Just a quick reminder that these short form reports are a way for Martin to give more current information based on the reports from Costas, SV1DH, which come in first. The ‘final’ edition of the report will be uploaded once all the remaining data has been collated and formed into the report.

I hope you enjoy them and find them useful. Let me know if you have any problems or comments.

Subscribe FREE to's
Amateur Radio Newsletter

We never share your e-mail address.

Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!

  • Matt W1MST, Managing Editor

Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: