AmateurRadio.com

I’m indebted to Roger, G3XBM for pointing me at the news that the VC1T expedition was heard in the UK on 144MHz by G4SWX, but unfortunately no 2 way QSO was made, despite trying for 4 hours to make a two way contact. It is also reported that a station in Ireland heard portions of the VC1T transmission.

See the news from the ARRL site

See a screenshot from G4SWX at G4CQM’s site

Tim Kirby, G4VXE, is a regular contributor to AmateurRadio.com and writes from Oxfordshire, England. Contact him at [email protected].

The UKube-1 satellite was launched this evening with the first pass due over the UK at 2014 local time.

Coincidentally, supper had finished around 2013 local time, so I sped upstairs and switched on the FT-847 with the V2000 vertical connected. The UKube-1 CW beacon on 145.840 plus minus doppler was the first target. It doesn’t transmit continuously, but I was pleased to hear it around 2018 local up on 846. Shortly after that, I heard the telemetry on 145.915 coming through at very good strength.

Congrats to the UK team responsible for the satellite!

Tim Kirby, G4VXE, is a regular contributor to AmateurRadio.com and writes from Oxfordshire, England. Contact him at [email protected].

I thought my hands and eyes were good enough to make a start on this kit, which I have only just unpacked, having had it for months. I was waiting until I was less clumsy. When built, this will make a really useful WSPR beacon.

The packing is wrong as I had asked for a GPS module, which is missing, but there is a surplus relay board in the box.  I was very careful unpacking the kit. and have left in packets those parts not yet needed. Some are anti-static.

Sadly, my eyes and hands are not really good enough: I started on the 10m LPF PCB and, frankly, this was a real struggle both for my eyes and hands. Tomorrow I shall test this with my generator and 50 ohm load.

Two people have very kindly offered their help building the kit. I fear I shall have to admit defeat and ask them to help me. This is a great pity as I was so hoping I’d be fit enough to build this. Sadly, this seems unlikely any time soon.  My stroke is taking its toll on my abilities. WSPR is OK, but I am struggling with building still.  Talking in tonight’s contest will be hard.

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.

Like others, I enjoy learning about the early history of radio. It gives me an idea of how far the hobby and technology has come as well as inspiring the imagination.

I found a great site, MagazineArt.org, which allows the viewer to peruse many of the covers from a variety of periodicals from the early days of the wireless.

Check out some of them here:
Popular Radio
Radio Age
Radio Craft
Radio News
The Wireless Age
Shortwave Craft

Scott Hedberg, NØZB, is a regular contributor to AmateurRadio.com and writes from Kansas, USA. Contact him at [email protected].

Yet another variation on the Pixie arrived by email today from Sverre Holm in Norway who has LM386 mods to reduce BCI, provide mute and add sidetone.

See http://la3za.blogspot.no/2003/04/using-pin-7-of-lm386-to-reduce-bci-and.html .

This looks a very useful mod to this simplest of circuits. Sverre also added a much wider tuning range that helps to get contacts. Low power does not seem to be the main handicap.

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.

6m July 08 Courtesy: ON4KST.org

50MHz continues to demonstrate its preference of early July to reveal its magical powers. Here in VE7 land, the band has been open continuously to some region for more than 48 hours. Yesterday's repeat west coast sporadic-E opening to EA7, EA8 and CT1 was capped with a multi-hour opening to Asia.

Six meter operators in the western part of the continent exchanged signals with Japan, Taiwan, China and South Korea beginning at around sunset on the west coast and continuing until 0230 the next morning! Many stations on both ends of the path filled their logs during the heyday event.

To add to the fun, BV2DQ (Ran) in Taiwan, was also active and gave several 6m ops a new country, working as far east as Colorado.


BA4SI (Li), in mainland China also handed out contacts to two old hands on six, K7CW (Paul) and KE7V (Johnny) who also happen to be brothers.

BA4SI 6m stacked Yagis

Paul also worked two stations in South Korea along with his 310 JA QSO's, beating out his brother's 300 contacts with Japan. KE7V reported working over 100 JA's on phone during the amazing conditions.  W7FI (Jim), in Seattle, also did well, with his comment from the ON4KST 50MHz chat page summing up the event

" W7FI Jim - That blows away my 113 JA last night, pile still calling when I qrt'd at 0800z. "

I was also present for the action, but worked only a few dozen of the strongest signals as I have been plagued with exceptionally high power line noise this summer, directly in line with Asia. Additionally, a new source of QRM has cropped-up in the form of an S9+ 49MHz wireless headset that has drifted up into the band. As the days get warmer, it has now drifted from below 50MHz up into the working part of the band and last night had settled itself smack on 50.090. Being a wide band FM signal, it effectively destroys any reception for about 50KHz of the band. As Murphy would have it, the crud is coming from the exact same direction as my beam heading to Asia. Yesterday I was able to roughly determine its location with a handheld Icom scanner and today I will use a quickly-built 6m dipole to zero-in on the offending source. Hopefully I can eliminate the problem soon.
Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

Peter DL3PB has sent details of his version of the Pixie transceiver. He claims no broadcast breakthrough by using this configuration and lots of QSOs.

Peter DL2PB’s Polyakov Pixie

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.