SOTA Activity Weekend September 12th & 13th
Mike Crownover, AD5A, is a regular contributor to AmateurRadio.com and writes from Texas, USA. Contact him at [email protected].
Magic
https://www.youtube.com/watch?v=hxU1ZhINaHk
Mike Crownover, AD5A, is a regular contributor to AmateurRadio.com and writes from Texas, USA. Contact him at [email protected].
Magic
Mike Crownover, AD5A, is a regular contributor to AmateurRadio.com and writes from Texas, USA. Contact him at [email protected].
A New Country and Some 2m Es
The summer propagation doldrums, as well as my roof reshingling projects, received a short respite this week with the arrival of a new DXCC QSL for 160m. The K1N card (Navassa Island Expedition) was received for my CW QSO this past winter. The card brought my 160m DXCC total to 155 worked and confirmed while adding one more to my overall all-band total of 336 / 336.
Sunday afternoon brought a rare and welcome 2m sporadic-E opening. Signals on 6m towards Colorado quickly rose from a normal 'S9' to ear-shattering S9 + 30-40db with one signal putting the S-meter of my IC-756PROIII hard against the right pin and completely blanking the bandscope's lower regions ... I have only seen this happen once before, when beaming semi-local VE7XF while he is running high-power.
I immediately activated my Es MUF receiver (Icom R-7000), tuned to an empty FM frequency and squelched. Not long after, the squelch broke with a strong signal also from Colorado and several more throughout the band. It is difficult to ID FM signals as they rarely identify except at the top of the hour.
After several CQ's on 144.200 (9el yagi and 150 watts) aimed to the SE, W9RM in Colorado popped-up briefly with an S9 signal and was quickly worked before he faded. Unfortunately, either due to lack of activity or fast-deteriorating conditions, his was the only signal heard. In terms of 'quality' of the opening, it was poor, but any 2m Es is always exciting.
I once had a two-hour 2m Es opening to southern California and worked 32 Californians on 2m SSB before conditions faded ... it would be nice to see that once again. One of the fellows I worked that night had just set up his new 2m transceiver and, not being familiar with 2m propagation, told me 'I'll look for you again tomorrow night'. I told him that he could look for me for the next 20 years and he'd likely not hear me ... that opening was 32 years ago!
Let's hope we get some more 2m Es before the season ends as it is one of the most exciting propagation experiences there is.
Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].
Pipit 15m transceiver
This rig was designed and built many years ago. It spanned some impressive distances and worked well. The receiver was a direct conversion and the gain adjustment was before the mixer, so RF gain could be reduced easily which helped strong signal handling. No RX-TX offset was needed as this was just about right anyway. For quite a time it was the main rig used and every QSO felt like a million dollars! It was written up in GQRP SPRAT a very long time ago (30 years ago?). It is hard to get much more fun than using something this simple and working a long way regularly with it.
Before I had crystals for the CW part of the band my very first QSO was a USA SSB station that I called that was located near Chicago some 4000 miles away. I nearly fell off the chair when he replied. After than I knew anything was possible. I really should rebuild it someday.
It crossed the Atlantic many times. I even used a 10/15m trap dipole (very low) occasionally and never used anything bigger than a low wire dipole. Output power was 800mW, quite enough I found for solid CW QSOs.
See https://sites.google.com/site/g3xbmqrp3/hf/15m_pipit .
Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.
Andy’s Balloons
Like Timex watches, the incredible Picosat balloons of Andy, VK3YT, 'take a licking and keep on ticking'. On May 23rd, Andy launched his PS-46 HF Pico balloon and on June 4th it had arrived back home, completing the circumnavigation of the earth in just 12 days ... but it kept on going. Although taking a little longer this time 'round, PS-46 arrived back over its starting longitude exactly one month later, on July 4th, completing its second circumnavigation of the planet! It slowed briefly enough over the Indian Ocean to trace out this interesting ground track.![]() |
| courtesy: http://picospace.net/ |
PS-46 can be tracked via HF packets delivered via JT-9 and WSPR. Frequency information and tracking notes can be found on Andy's website for those interested in tracking the balloon themselves. As well, its track (and other balloons) can be followed on the Spacenear.us website. I think Andy's balloons are very cool and demonstrate a new aspect of amateur radio that was completely unheard of just a few years ago.
Go PS-46!
Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].
Leaving Dragon Lake
This is the current look of my shack and my antenna farm. Everything packed up and ready to leave Longtan (a.k.a. Dragon Lake). Four years after we moved back to Taiwan we had saved enough money to buy a house and we found one to our liking in neighbouring Daxi (a.k.a. Big Creek). Because the lease of our Longtan house was due we decided to move in even though nothing is finished. Really, we don’t have doors yet and not even one wall is plastered and painted. The best parts of the house are the bathrooms and the kitchen which are 80% done. Radio activity is limited to monitoring local radio, especially the nearby airfield, and the medium wave band with a small loop antenna. Yes, even indoors this is possible now! My summer will be spend plastering and painting, but it will be worth it: my new shack will be 6 by 2.4 meters big. I’ll be back in the fall. Cheerio!
Hans "Fong" van den Boogert, BX2ABT, is a regular contributor to AmateurRadio.com and writes from Taiwan. Contact him at [email protected].

















