AmateurRadio.com

Welcome to Handiham World!

Take a video tour of the KA0PQW ham shack

The tour, available in both YouTube video and in MP3 audio from the Handiham website, lasts about nine minutes. Matt describes all of the equipment in his ham shack, which also has some audio equipment for his radio show, which is done on a non-amateur radio feed. The impressive setup includes a repeater! Matt knows the layout of the shack very well, and is of the opinion (which I share) that we should all know enough about our operating area to use the equipment independently. Furthermore, a system of “a place for everything and everything in its place” serves the efficient amateur radio operator well, because when things are where you expect them to be you can grab that first spot in the DX pileup or quickly silence a radio when the phone rings. In an emergency, you certainly want to concentrate on communicating, not on trying to find a microphone or an accessory in a pile of clutter. Since Matt is blind, he needed to develop his own system of knowing where things are in the ham shack. Being organized in this way is a discipline that we can all use to be better amateur radio operators.

Visible in the video, but not mentioned in the audio, is the electrical breaker box in one corner of the room. There is also a basement window, which lets in some natural light. The repeater rests on some 2 by 4 boards, lifting it above the basement floor.

Ready for a tour? Those of you listening to the audio podcast can just keep listening, because we will go right to the audio tour. If you are reading the HTML version, you can follow the link to the story on Handiham.org, which has embedded video.

Welcome to Handiham World!

Take a video tour of the KA0PQW ham shack

The tour, available in both YouTube video and in MP3 audio from the Handiham website, lasts about nine minutes. Matt describes all of the equipment in his ham shack, which also has some audio equipment for his radio show, which is done on a non-amateur radio feed. The impressive setup includes a repeater! Matt knows the layout of the shack very well, and is of the opinion (which I share) that we should all know enough about our operating area to use the equipment independently. Furthermore, a system of “a place for everything and everything in its place” serves the efficient amateur radio operator well, because when things are where you expect them to be you can grab that first spot in the DX pileup or quickly silence a radio when the phone rings. In an emergency, you certainly want to concentrate on communicating, not on trying to find a microphone or an accessory in a pile of clutter. Since Matt is blind, he needed to develop his own system of knowing where things are in the ham shack. Being organized in this way is a discipline that we can all use to be better amateur radio operators.

Visible in the video, but not mentioned in the audio, is the electrical breaker box in one corner of the room. There is also a basement window, which lets in some natural light. The repeater rests on some 2 by 4 boards, lifting it above the basement floor.

Ready for a tour? Those of you listening to the audio podcast can just keep listening, because we will go right to the audio tour. If you are reading the HTML version, you can follow the link to the story on Handiham.org, which has embedded video.

One of the things at the back of my mind when I was writing that the magic of ham radio wasn’t in high technology was the feeling that anyone who got into the hobby out of a mania for high-tech toys was soon likely to be disappointed. I’ve seen it happen when people who are new to the hobby and don’t yet know much about it get an enthusiasm for APRS or Echolink. They get disappointed that the network coverage is patchy or nonexistent compared to cellphone coverage because they don’t realize that it depends on hams to provide the infrastructure and where there are few hams – or none interested in these particular aspects of the hobby – there are no repeaters and no gateways.

I’ve seen the same people criticize the latest VX-8, TH-D72 and Icom D-Star radios as being overpriced and unimpressive. They don’t like the geeky “walkie talkie” look or the plain 1990s LCD display. They can’t believe that APRS radios don’t support predictive text entry like the cheapest mobile has for more than a decade. And why can’t they have a colour screen and a scrolling map display?

It’s easy to dismiss these criticisms as coming from people who don’t understand that ham radio is a specialized niche market and that amateur HTs don’t benefit from the economies of scale which allow vastly more R&D to be spent on a smartphone costing a similar amount of money. But then I realized that perhaps the critics had a valid case. Manufacturers of smartphones don’t completely reinvent the wheel whenever they release a new model. They just design the hardware. But the hardware is a platform. On it runs a standard OS and various apps, a few of which may be customized to the manufacturer or phone but most of which are generic. Given that software development is one of the most time consuming and expensive parts of any new technology product development, wouldn’t that be a huge saving?

Why can’t top of the range hand-held radios use a similar hardware architecture to cellphones? Instead of a custom design the radio would be a computer running embedded Linux. The RF side could be SDR or it could use conventional technology – it wouldn’t matter, that would simply depend on what is most cost effective and delivers the best battery endurance. But all the control functions, together with transmit and receive audio, would be accessible through an API to software. The user interface would be an app.

Since the radio is a computer the interface would be endlessly customizable and all kinds of things not possible with existing radios could be feasible. Instead of entering local repeater frequencies into memories you could install an app that gets your position from the built-in GPS and shows you the nearest repeaters. One click and you’re listening on it.

Instead of a plain LCD display showing distance and bearing your APRS capable radio could show a full map display just like APRSISCE currently provides on Windows smartphones. You wouldn’t need packet modem hardware in the radio because packet generation and decoding could be done in software. In fact there would be no such thing as an APRS capable radio. The platform would be the same – if you wanted APRS you would just install the APRS application. If you wanted Echolink you could add the Echolink application. If you wanted D-Star you could buy the D-Star app from Icom. If you wanted to work satellites then I’m sure someone would write an app that would keep track of where the satellites are and even control the radio frequencies taking account of doppler.

You could power this hypothetical next generation radio using cellphone battery packs, which are a lot cheaper than the custom battery packs for traditional ham radios. You could even use standard cellphone accessories.

So why won’t this happen? I guess the reason for that is that Yaesu, Icom, Kenwood and the rest don’t make cellphones. Their business is making radios that are intended to be as dumb as most of their users. Ham radio is just an offshoot. The market just isn’t big enough to justify developing what for them would be a completely different and unique hardware platform. So I guess for the foreseeable future we’ll be stuck with our geeky walkie talkies and the cool stuff will all be on cellphones.

ChangeDetection.com once again alerted me to a change in the NCDXF/IARU International Beacon Project status page so that I can manually update the beacon status file for VOAProp. I think it is worth a comment on the fact that 7 out of the 18 beacons appear currently to be off the air. This is the most I can recall being off at the same time. Some have been off for months. If you rely on the beacons to see whether a band is open, you may think conditions are worse than they really are. I hope all the beacons are soon restored to full operation.

Several ham radio blogs have linked to the Wired article Why Ham Radio Endures in a World of Tweets. “What is it about a simple microphone, a transmitter-receiver and the seductive freedom of the open radio spectrum that’s turned a low-tech anachronism into an enduring and deeply engaging global hobby?” the author asks. He goes on to describe the thrill of establishing a direct, person to person long distance contact and exchanging QSL cards, which he contrasts with “a world of taken-for-granted torrents of e-mails, instant messages and Skype video-chats.” It’s a point of view that QRP enthusiasts and many others will identify with.

In the comments to the article many have been keen to say that ham radio is not low tech, citing “VoIP Radio” and digital techniques as examples. They may be true, but I’m afraid the commenters miss the point. The more high-tech ham radio becomes, the less magic there is. Developments like D-Star are about as far from the concept of a simple transceiver and the freedom of the open radio spectrum as it is possible to get. It isn’t simple, it isn’t free (since it depends on a network controlled by someone else) and it isn’t open. Which is why it is anathema to many of us.

There is a danger that the pursuit of technology could turn ham radio into a poor copy of existing communications networks. Ham radio has endured because it has held on to its traditions involving relatively simple technology that most hams can understand and even build for themselves. If we ever lose sight of that the hobby is as good as dead.

Roger G3XBM has started a new project: a simple sideband transceiver for the 10m band. Roger’s projects are always interesting so this page will be one to keep an eye on. If it can be made small enough to fit into a hand held case this could make a great portable radio capable of DX contacts during the sporadic-E conditions during the summer.

Regular readers will know that last year I worked the Czech Republic using a hand-held Intek H-520 FM transceiver with a telescopic whip. The Intek, despite being a nice looking radio, is actually a horrible piece of kit with a PA that sucks the power out of the rig’s batteries, especially if the antenna presents anything other than a perfect SWR. And the trouble with 10m FM in the summer is that too many people are trying to use too few frequencies so there is terrible QRM and the “capture effect” means that only the strongest station is heard.

A little double-sideband rig, even with only a couple of watts output, ought to work much better. I shall be following Roger’s project with interest and intend to make this my next radio project too.

Series Four Episode Four of the ICQ Amateur / Ham Radio Podcast. News Stories include:

• Reduced Height Antennas
• UK Space Agency announcement
• Amateur wanted for UK Space Agency
• Technical clinics at Kempton Rally
• Hams broadcast info out of Egypt
• Why ham radio endures in a world of tweets
• ISS releasing Ham Satellite
• UK Propagation charts for February 2011
• Balloon launch opportunity
• 1st CASHOTA activation of Blackrock Castle
• Voice of Russia on 7200 kHz
• Icom America releases radio transceiver

Steve Nicholls (G0KYA) Propagation Report , and Martin (M1MRB) discusses propagation, antennas and more with Steve Nicholls.