AmateurRadio.com

This year Workington and District are joining up with Barrow in Furness club to extend the amount of stations we activate. We are operating from Silloth GB1LBC, Workington GB2LBC, St Bess GB4LBC and Barrow GB5LBC lifeboat stations from the 21st to the 29th January in a relaxed style. hopefully making htis years SOS radio week a bigger event locally.

The purpose of our time on the air as special event stations is to promote the RNLI  as a charity, something that costs £300,000 a day to run!

St Bees will only be running at the weekends and We are looking to be on mainly 40m and 80m but the Cobwebb is coming with me so there is a possibility of something on the higher bands but it really depends on the weather as high winds will certainly destroy it.

I hope to work as many as possible in between cups of tea and choccy biccies and if you would like to make a donation then it would be really appreciated. Keep an eye out on the status monitors to see when we’re up and running.

Alex Hill, G7KSE, is a regular contributor to AmateurRadio.com and writes from Cumbria, UK. Contact him at [email protected].

The Raspberry Pi, which is a 700 Mhz ARM-based single board computer targeted at providing computing hardware to poor countries is going to be going into production soon.  Two models called “A” and “B” are being offered, at approximately $25 and $35 (US).  Options to purchase boards and donate money to provide units to needy folks around the world will be available.  

The concept of single board computers isn’t new, but the horsepower and price point of these units are.  At this price range it puts the boards squarely in Arduino territory, but unlike the Arduino and other microcontrollers it will run a full blown OS.  Several Linux distributions will be supported immediately and presumably BSD variants won’t be far behind.  It will not run Windows or Windows emulation, like WINE.  (Yes, I know WINE is not an emulator).

The board is equipped with a USB port that obviously can be used to interface with a multitude of devices, however it also includes a General Purpose I/O port or GPIO that supports, PWM, Serial UART and I2C capability.  This will open the board up to hardware hackers like us.  Sweet!

I’m pondering what amateur radio applications this could run.  It has enough horsepower to do DSP.  It would make a nice logging and contest appliance, with  some well-designed software.  How about an EchoLink or digimode appliance?  Considering the low price it’s almost disposable and could make a powerful hot air balloon radio payload system controller.  I may port my keyer code over to it for giggles.  It will be interesting to see what uses radio artisans come up with.

1st PSK QSO with K5ZG

I want to thank all those who posted comments and emailed me direct to help my PSK journey along the road to success. Today I sat down and read all the comments and considered the feedback which helped me  get a plan going so I could be on the air with PSK. So what was wrong....well the good old Elecraft K3 was for some reason not set up the way I thought it was. I went back into the manual to see what the recommended settings were. The K3 when in DATA A mode (which is the mode that is recommended for PSK) the Line out to the Tigertronics Signalink is not taken from the MIC but the rear LINE OUT on the K3. That was the first problem it was not. I am sure I selected LINE OUT rear panel....but the menu does not lie!!! it was set to

fldigi and KI4BIY

something else. So that was changed and I gave some PSKing a go.... but still nothing!!! So it was back to the K3 settings again, this time I had to check to make sure DATA A was set to DATA A.  I thought it had to be as  the LED readout on the K3 reads "DATA A". I checked and DATA A was set to PSK D what ever that is  so I set DATA A to DATA A. It was then that things seemed to be looking up. I saw a station (K5ZG) calling CQ on the waterfall, I gave him a call and he came back to me!!! SUCCESS I made my first QSO on PSk but the QSO was not complete as QRM and the band conditions were changing and he faded away before the QSO was completed. I then closed down DM780 and opened up Fldigi to see how that worked. It was about 20 min's or so later I made contact

My PSK reports with 5 watts

with KI4BIY. The problem here was not the band conditions or the contact but I was using Fldigi and had NO macros setup. So it was live PSKing but I  was able to have a very nice QSO. This gave me the confidence the program was now working. There is one question I still have, when I transmit my output power can start off at 5 watts but as the transmission progress the output can climb as high as 12 watts before leveling out. I can readjust the output and get it to stay at a steady 5 watts but it takes some adjusting and readjusting of the Signalink TX. Any thoughts on this.....is it normal or are there more adjustments to be made??
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

Monument, Colorado
Saturday April 21 and Saturday April 28 (8 AM to 5 PM) 2012
Location: Tri-Lakes Monument Fire Station 1
Sponsored by the Tri-Lakes Monument Fire Radio Association

 The Technician license is your gateway to the world-wide excitement of Amateur Radio…

• Earn your ham radio Technician class radio privileges
• Pass your FCC amateur radio license exam right in class on the second day
• Multiple-choice exam, No Morse Code Required
• Live equipment demonstrations
• Learn to operate on the ham bands, 10 Meters and higher
• Learn to use the many VHF/UHF FM repeaters in Colorado
• Find out how to participate in emergency communications

There is no cost for the class (donations accepted)
However, students must have the required study guide:
Gordon West Technician Class guide, 7^th Edition $20.95
And pay the FCC Exam Fee: $15.00

Advance registration is required (no later than April 15^th, earlier is better!)

To register for the class, contact: Bob Witte KØNR
Email: [email protected]  or Phone: 719 659-3727

For more information on amateur (ham) radio visit www.arrl.org or www.wedothat-radio.org

Bob Witte, KØNR, is a regular contributor to AmateurRadio.com and writes from Colorado, USA. Contact him at [email protected].

Through Eldon, WA0UWH I have discovered another blog to add to the blogroll: that of Jeff, KO7M. Jeff is interested in a lot of the same things I have been (including light aviation: an ambition of mine when I was in my 20s but which I could never afford to take up.) But what really piqued my interest was that he has just got a Parallax Propeller to generate a WSPR signal.

This is one of the things I was interested in trying. But I never got further than wondering how to implement the fractional frequency shifts of the WSPR signal, which uses 4 tones shifted by just under 1.5Hz from each other. Jeff has apparently found that a 2Hz shift is good enough to be decoded, allowing WSPR to be sent using the integer frequencies the Propeller chip can easily generate.

Once I have finished the Tiny Keyer project and can get back to the Propeller I will be trying this myself. My ambition at the moment is to make a multi-band multi-mode (OPERA, WSPR and perhaps QRSS as well) standalone beacon with an LCD panel to enable me to choose the band and mode. We’ll see how far I get, but having two other people working on the same ideas should certainly make the task easier!

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

Series Five Episode Two of the ICQ Podcast has been released. News Stories include :-

• Yaesu supports 4-FSK digital radios
• Yaesu Musen
• Go back to school - DX University
• US feedback for 60m band plan
• GB80PW for the Practical Wireless 80th year
• New DV-RPTR modem board
• RSGB Commonwealth Century Club Jubilee Award 2012
• UK Propagation charts for January 2012
• New data mode crosses Atlantic on 136Khz at the first attempt
• USA HF Spread Spectrum Experiment
• 43 years of 73 Magazine online

Your feedback and Ed Durrant (VK2ARE) interviews android app author Wolfgang Philipps (W8DA).

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

Giving PSK a go

On Wednesday I spent some time familiarizing myself with HRD's DM-780 and getting some custom macros setup. In time I am  going to try out Fldigi and see which program I like better. The only reason I started with DM-780 was the K3 is all setup with HRD so I am half way there when it comes to PSK. So how did it go...well I am operating at 5 watts and there were some stations calling CQ but I was not able to grab their attention with my replies. I setup DM-780 to send info up too PSKreporter but up to this point and including today I just don't seem to be spotted at all. I am not sure if my setup with PSKreporter is wrong or I my signal

Action on the band

is not getting out. I do see on my LP-100 watt meter there is 5 watts getting to the antenna but whether it is readable or not I am not sure. Besides I am still getting the hang of PSKreporter as well so it could be operator error at this end. Also today I was involved in the NAQP CW contest but am now just taking a bit of a break. I was calling CQ on 40m CW a short time ago and KC9SNC came back to me. Our QSO was going well and the CW speed was very comfortable for me.......then came the contester's right over our QSO!!! Now they may not have heard us as I was QRP at 5 watts but that brought the QSO to an end. I did email Matt and gave him some more info about my station and that we may have better luck next time. So up to this point I have not been able to make a PSK contact maybe I will give Fldigi a go on Sunday and see if I can bag my first PSK QSO. It's now time to head back to the NAQP CW contest......and try not to QRM anyone who is not involved in the contest!!!
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].