AmateurRadio.com

There’s lots of information spewing forth from the interwebznet. Here are a few items of interest.

Dan KB6NU has started doing an Extra Class Question of the Day on his blog. I think this is a great idea. I may need to borrow  steal reuse this idea on my blog.

The Fi-Ni Report did their usual outstanding job of educating the ham community, this time via A Short History of QSLing. Just because something is fictional,doesn’t mean that it’s not real.

The ARRL announced that the Logbook of the World is going to support the CQ Awards. This is great news for the ham community. The more awards that are supported, the more usage LoTW will get, making it more useful for additional awards.

Buried in the minutes of the July 2011 ARRL Board of Directors Meeting, the Board “authorizes staff to proceed with planning and negotiating a vendor agreement for a Digital QST edition, to be approved by the CEO, General Counsel and the Administration & Finance Committee.”  So QST will be available in digital format soon.

You know, I think this internetz thing is starting to catch on!

73, Bob K0NR

I built the Kits and Parts RF Amplifier. Unfortunately it didn’t work.

When power is applied the meter in my bench power supply reads 0.01A. As soon as the Propeller beacon starts the current draw increases to 0.03A (at 8V). But the needle on my QRP power meter, which shows more than 25mW from the barefoot Propeller, doesn’t budge.

I don’t understand it. It’s a simple enough circuit, there isn’t anything to go wrong. Unfortunately I find these kit construction failures too demoralizing. I struggle with my vision and shaky hands just to build the board. Desoldering and faultfinding are beyond me at the moment. If I do discover the cause of the problem it’s something really obvious that anyone with a normally functioning brain would spot. I think it is time for me to accept my limitations and stop attempting to do what I used to be able to do before my brain surgery. From now on if I can’t buy what I want ready to go out of the box I’ll just have to do without.

One of the enduring aspects of amateur radio is the emphasis on ‘experimentation’ and ‘homebrew’. To many people this means designing innovative circuits for their own transceivers, amps or whatever floats their boat. My area of interest is in collecting either bent wire, off cuts of cable and odd shaped plastic parts scavenged from just about any skip or rubbish bin I can find. Some people like to call this antenna experimentation. My XYL likes to call it ‘That junk in the garage’. I like to call it my continued education. Below is a teaser!

The latest in my armoury of ‘stuff I’ve done’ will never help anyone chase DX or bust a pile up for a little activated square or something else. But it will give me another band to work with when I’m away from home, either on top of a summit, at the mother in laws or operating portable in the summer Es season (I say summer because the top of St Bees head isn’t very welcoming in the winter as I found out whilst operating GB4LBC).

My take on the 5/8 wave 6m vertical originally published by the UKSMG by Mike, G3JVL took a little over a weekend and was made relatively cheaply from scrounged resources. I enjoyed the job so much I’ve added a little project page here which I hope you enjoy. Feel free to try it out yourself and improve on the design path I took, let me know how you got on with the manufacturing of what should be a nice project (that can also be cheap if you’re scrounging skills are up to scratch)

One of the enduring aspects of amateur radio is the emphasis on ‘experimentation’ and ‘homebrew’. To many people this means designing innovative circuits for their own transceivers, amps or whatever floats their boat.

My area of interest is in collecting either bent wire, off cuts of cable and odd shaped plastic parts scavenged from just about any skip or rubbish bin I can find. Some people like to call this antenna experimentation. My XYL likes to call it ‘That junk in the garage’. I like to call it my continued education. Below is a teaser!

The latest in my armoury of ‘stuff I’ve done’ will never help anyone chase DX or bust a pile up for a little activated square or something else. But it will give me another band to work with when I’m away from home, either on top of a summit, at the mother in laws or operating portable in the summer Es season (I say summer because the top of St Bees head isn’t very welcoming in the winter as I found out whilst operating GB4LBC).

My take on the 5/8 wave 6m vertical originally published by the UKSMG by Mike, G3JVL took a little over a weekend and was made relatively cheaply from scrounged resources. I enjoyed the job so much I’ve added a little project page here which I hope you enjoy.

Feel free to try it out yourself and improve on the design path I took, let me know how you got on with the manufacturing of what should be a nice project (that can also be cheap if you’re scrounging skills are up to scratch)

The other night, I tried uploading some QSOs to Log of the World.  I was unsuccessful as my certificate had expired.  I filed for a new one, got everything working and uploaded my latest batch of QSOs without a problem.  I try to do this once a month or once every couple of weeks.

Out of curiosity, I went back to the LOTW site tonight to do a little math.  I have a LOTW QSL return rate of 19.8 percent.  I have no idea as to whether that’s good, bad or average.

I went over to eQSL and did the same math – 19.27 percent – slightly lower.  Frankly, that surprised me.  I think we can all agree that eQSL has less “hoops” to jump through in order to get it working.  I am not criticizing LOTW when I say that – I’m just pointing out what I think is fact.  Although personally, I have not had any insurmountable LOTW problems, I have heard horror stories from other Hams who had, and gave up – running and screaming into the night.  eQSL may not be as secure, I don’t know – but it does seem easier to use. 

I would have thought (there goes that “conventional wisdom” again!) that being easier to use would also translate to ” greater participation and use”.  I guess not.

Tonight is the 80 Meter QRP Fox hunt.  Dave N0IT in Missouri is not feeling all that great, so he has swapped with John K4BAI.  So the Foxes will be John in Georgia and Jim K9JWV in Utah.  “Conventional wisdom” is telling me that from New Jersey on 80 Meters, I should be able to work John fairly easily and that Jim may be a stretch, if I hear him at all.

We’ll see.

72 de Larry W2LJ
QRP – When you care to send the very least!