AmateurRadio.com

Thanks to all of you here and on AmateurRadio.com who were so kind as to express condolences and kind words upon our Sadie’s passing.

This is going to take a while to get over – but life does go on.

So …… on an Amateur Radio note, the bands did not seem to be active at all today.  For a few brief minutes this afternoon, I was able to get on and listen.  I heard and worked EI4AA on 12 Meters and was surprised by the fact.

Bernard was pretty weak hear – 569 or there abouts, maybe a little louder – 589 on QSB peaks, maybe?  As I called him, I thought to myself, “There’s no way I am going to get an answer here.”  But sure enough, I did and on my first call – and I received a 559 report for my efforts.  And I was very happy to receive that.  Then I went down to 20 Meters and worked a station in Texas who was working the SKCC Weekend Sprint.

After that, I had to QRT as my daughter Cara (holding Sadie above), who is a member of the children’s choir at Church, was part of a free concert this afternoon.  The theme was “A Night on Broadway” and the children’s choir, the adult choir, the hand bell and hand chime choirs all participated, performing various Broadway tunes. It was a very enjoyable two hour event.

Today was very windy and cold – winter has come back to New Jersey with a vengeance.  Yesterday, the forecast was for 1-3″ of snow, but that forecast was a bust.  We barely got a dusting – and please don’t misunderstand – I am in no way complaining!

As soon as it turns to 2/13 UTC, I am going to head downstairs to see if I can get a daily QSO or two in and then off to bed.

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

The Heathkit AT-1 represents the commercial embodiment of the simple Master Oscillator Power Amplifier (MOPA) transmitter using a crystal controlled 6AG7 oscillator plus a 6L6 final output tube.

Although it was possible to design and build a simpler transmitter, the goals of output power and stability could become mutually exclusive when trying to operate with only one tube. For a novice class license holder of 1951 the Heathkit AT-1 represented a solid performing rig that would be relatively easy to construct and operate.

The Novice remained the primary entry license until the Morse code requirement was eliminated for Technician licenses in 1990. On HF it permitted code transmissions only, with a maximum power of 75 watts, (input to the transmitter’s final amplifier stage) on limited segments of the 80, 40 and 15 meter bands.

For $29.50 and the loan of a few tools you could get some use out of that new novice license

The earlier MOPA circuit from the ARRL handbook of 1941 below shows a layout remarkably similar to the circuit of the AT-1 although it is designed for plug in coils rather than the band-switching arrangement of the later Heathkit transmitter.

MOPA transmitter using a 6L6 and an 807 as the power amplifier (ARRL Handbook 1941)

For a little added complexity MOPA transmitters generally offered better stability of frequency and keying waveform than single tube crystal controlled or self exited rigs. The straight forward design of the AT-1 should have looked familiar to novice class hams after studying the ARRL handbook or other radio publications.

Heathkit AT-1 Circuit diagram showing band-switching arrangement and link coupled output

Once the novice had upgraded his license the AT-1 could be expanded by the addition of the Heathkit VF-1 variable frequency oscillator to allow transmission on any frequency within the allowed band.

The Heathkit VF-1 Variable Frequency Oscillator

The VF-1 covered 160-80-40-20-15-11-10 meters and used an OA2 voltage regulator tube to provide a stable voltage for the oscillator. Ceramic coil forms, solid construction and high quality components were used to help increase stability.

The Heathkit AC-1 Antenna Coupler. Designed to attach to a single wire by the insulated post on the front panel.

Heathkit AC-1 Antenna Coupler circuit diagram

Although Heathkit did not produce a AM modulator for the AC-1 there is provision for modulator connection on the rear panel. The earlier ARRL manuals have several suitable circuits for modulators that would work with the AC-1. Most functioned by driving a modulation transformer with the output from an audio power amplifier. The secondary of the modulation transformer would be carrying the DC plate supply for the power amplifier tube plus or minus the instantaneous voltage of the audio waveform. By changing the plate voltage to the final amplifier tube the radio frequency output would be controlled by the amplified audio frequency resulting in amplitude modulation.

Owen Morgan, KF5CZO, is a regular contributor to AmateurRadio.com and writes from Texas, USA. Contact him at [email protected].

The repaired key ready for action

I have not been able to get around to putting a post out there the last couple of days but I have been busy getting stuff done around the shack and shack related stuff. Some of the action here was been wanting to settle the Begali key issue. I found it to be sending dot's and dash's on it own now and then. The right paddle was sticking very badly so I took it apart. Low and behold  the coffee that splashed some weeks ago here at the operating desk also got on my key in a very hard to see place. So it's all cleaned up, working great and waiting for me to use it!!!

RufzXP happy again

On my laptop I have Ubuntu 11.10 and up until Friday RufzXP was working just great. It was installed using Wine (a program that allows Windows programs to run on Linux machines) along with Netframe 2.0 but for some reason it just went funky and would not load. The error message said Netframe 2.0 needed to be  installed BUT IT WAS!! I tried many times to reinstall it but with no avail. Yesterday I
took the jump and downloaded Virtualbox onto my Ubuntu laptop and installed WinXP. Virtualbox is a great program that allows you to run other operating systems within a "virtual computer" it creates. I now have Windows XP running on my machine and was able to install Netframe 2.0 and RufzXP...all are getting along just fine now.

The KAT2 which also has a "cat" hair

Finally I have started my Elecraft KAT 2 antenna tuner for the Elecraft K2 radio.If you enlarge the picture see if you can spot the cat hair.....Oliver knows he is not supposed to be playing with my toys....BUSTED! I also have picked up some nice headphones at a great price along with a nice carry case for a surprising low price as well....but more on that in another post. Finally my Nikon D60 camera I use to photograph most if not all my blog pictures was giving me troubles. The memory card would not stay in the camera. Each time I tried to place it in it just popped out. If it stayed in the camera would tell me it was not installed. The camera is under extended warranty but the turn around time is 6-8 weeks! I took it in and I demonstrated the trouble....but it functioned fine and has ever since.  Now it's time to get some radio time in as most of the household chores and running around have been done. This week it will be time to setup for the ARRL international CW contest coming up next weekend.


Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

Yesterday I had another of those days that nearly made me decide to hang up my soldering iron for good. Some readers may have spotted the despondent blog post I made before I deleted it.

I assembled the Propeller LCD UI module. It went together easily and I had no trouble with the soldering using a magnifying lens (a strong pair of clip-on reading glasses clipped on to my normal reading spectacles) and resting my soldering hand on the desk to stop the shakes. But Murphy was not going to let me get off that easily.

Preparing to test the UI board I realized that I had skipped a page of the instructions and had not soldered a connector to the LCD daughter board. I thought that a connector for the main board  (a male 8 x 2 box header) had been omitted from the kit so I had installed one of my own. When I picked up the daughter board I saw the two rows of 8 holes and without thinking installed the 8 x 2 plain header that came with the kit. Also male. When I realized my mistake bad words were said. In all my years of kit building I have never before done anything quite so stupid.

I recalled Don Wilhelm W3FPR’s advice to K2 builders who install multi-pin connectors on the wrong side of the board to sacrifice the connector and not try to remove it intact. This I eventually did with Olga’s help. She suggested I place the soldering iron body along the row of soldered joints to melt all of them so the connector would fall out. That didn’t work, but it did soften the plastic part of the connector allowing it to be pulled away. I could then remove each pin one at a time and clean up the through holes using one of Olga’s sewing needles. Finally I was able to install the four 1 x 4 female headers that had presumably been supplied with the kit as a replacement for an 8 x 2 female that was really needed.

After all that stress (both to me and the board) I was relieved that when I plugged it in to the Propeller board and ran the demo program the UI module worked. But my happiness was short-lived. After I tried some modifications to the program I found that it seeemed to be crashing. The program would start at switch-on but would eventually hand up and not respond to the buttons. Sometimes garbage appeared on the LCD. The time before this happened got shorter with each attempt until sometimes the Propeller wouldn’t even respond to the reset button. I restored the original program in case my changes were to blame, but the device was still crashing.

Next I re-heated all the solder joints I had made, though they all looked OK. On reassembly the Propeller still crashed. Thoroughly despondent by this point I typed a post describing what happened in the hope that someone would offer to come to my rescue (thanks to those who did.)

After a rest it occurred to me that I had crashed the Propeller by dropping the board a centimetre or so on to the desk. There was probably still a bad connection somewhere. I re-soldered all the joints, including all the ones on the main Propeller board. That had been ready assembled. I guess that the manufacturer had used lead-free solder because I couldn’t melt the joints until I applied a bit of my own leaded solder to each one. Then all the joints looked nice and shiny.

After that treatment everything worked and up until now, cross fingers and touch wood, has continued to do so. So it seems that a poor soldered joint in the manufactured board was the cause of my problem! Thank you, Murphy, but I don’t need your help. We do this for fun, do we?

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

Two days ago we still had 10 degrees Celsius and rain. Sunday saw 24 degrees and sun. So what better to do than cleaning the Spiderbeam pole. WD40 sure made it shine again.

Hans "Fong" van den Boogert, BX2ABT, is a regular contributor to AmateurRadio.com and writes from Taiwan. Contact him at [email protected].

Series Five Episode Four of the ICQ Podcast has been released. News Stories include :-

• SumbandilaSat beyond repair
• Sweden loses 13cm amateur radio band
• FCC sets date for medical devices on 70 cm
• RSGB PLA/PLT Devices Announcement
• BATC Convention 2012
• FISTS marks a milestone
• New rules for 5 MHz (60 meters)
• VOA anniversary spurs museum effort
• Morse code not on the way out
• UK Propagation charts for February 2012
• Record set at Winter Hill

Your feedback, Ed Durrant provides his latest Australian report and Martin reviews a DVAP (Digital Voice Access Point).

Colin Butler, M6BOY, is the host of the ICQ Podcast, a weekly radio show about Amateur Radio. Contact him at [email protected].

My daughter and I made the short trip to the No Label Brewing Company in Katy TX to watch the South Texas Balloon Launch Team launch a helium balloon aimed at Nanjing China. Thanks to Tom AE5QB for letting us know about this event!

To track the balloon in real time go to : http://aprs.fi/?call=a%2FKT5TK-11&_s=mb

From the press release of the South Texas Balloon Launch Team:

The South Texas Balloon Launch Team is pleased to announce the upcoming launch of its twenty-eighth, helium-filled, unmanned balloon in twenty one years. The purpose of this flight is to establish a world record for distance by floating a balloon from Katy, Texas to Nanjing, China.

The balloon will be released at approximately 3 P.M. CST on Saturday, February 11, 2012. The site of the launch is at the western end of the No Label Brewery complex at 5373 First St., Katy Texas, near the old rice grain silos.

The public is invited to this free event, with a special invitation to science students and teachers. Free helium-filled balloons will be available to the first 100 students. Sorry, no pets allowed in the balloon area.

The balloon payload package weighs only about five ounces (150 grams) and contains a high altitude GPS tracking system and a VHF amateur radio transmitter. To conserve weight and battery life, no camera equipment will be on board. The maximum altitude is expected to be above 100,000 feet, with horizontal speeds between 100 and 150 MPH. The balloon size will increase from about five feet to about 39 feet at maximum elevation. Recovery of the payload package is not expected.

Individuals may follow the balloon’s progress on the Internet by logging onto APRS, filling in the “track callsign” field with “kt5tk-11”, and change the “show last” to 24 hours.

The South Texas Balloon Launch Team is composed of about twenty active amateur radio “Ham” operators from a variety of occupations who donate their time and expertise.

We appreciate the continued support by No Label Brewing Company for our amateur radio projects.

Owen Morgan, KF5CZO, is a regular contributor to AmateurRadio.com and writes from Texas, USA. Contact him at [email protected].