AmateurRadio.com

Like so many of my fellow amateurs, I ordered the new Elecraft KX3 within minutes of the order form going active on the Elecraft website.  Like so many of my fellow amateurs, I also wait anxiously for word that the new KX3 is shipping.  Finally, like so many of my fellow amateurs, I also look forward to seeing my credit card has been charged as that will signal the end is near.  The end of the wait that is.

Back in late December, the hope was the new KX3 would begin shipping in late February.  Even with the extra day added to the calendar, the month of February expired and no KX3’s are shipping.  It is now Friday, 9 March and the latest shipping status as displayed on the Elecraft website states “KX3 shipments are estimated to begin Mid-March, between the 16th and 26th”. 

While the excitement and anticipation is certainly very high for those who are chiseling their marks in stone waiting for that package to arrive on their doorstep, the level of patience is also just as high.  There is a certain calm which proves amateur radio operators are a professional and respectable group of individuals.  There is an understanding that each and ever delay experienced will just simply make a better and more reliable product in the end.  I doubt we would see this same level of calm and respect in the iWhatever community.

I’m really writing this blog article in response to a few emails I’ve seen on the Elecraft Yahoo Groups reflector.  The subject of cases and bags suitable for protecting our beautiful investment has been mentioned several times over the past few weeks.  Wayne Burdick with the Elecraft company has suggested the LowePro Edit 140 camera bag.  He stated in an email to the Yahoo reflector that he owns this bag and uses it to protect his KX3.  Many other members and anxious hams have ordered this bag for their soon to be KX3.

Just like everyone else, I want a bag of some sort to protect my new KX3 but I just don’t like the look of the LowePro Edit 140.  It looks like it might be a bit on the bulky side and if it were just going in the back of the SUV it would be one thing.  But I want a multi-purpose bag that can go in the back of the SUV, in a carry own bag or in my backpack for SOTA activations. 

A few months ago I purchased the LowePro Apex 120aw camera bag after seeing it featured in a K0MOS Youtube video.  Like Matt, I currently own and use the Yaesu FT-817 for SOTA activations.  I wanted a bag of some sort to protect my 817 while inside my backpack.  I ordered the LowePro Apex 120aw and it works beautifully for the 817. 

The LowePro Apex with my 817 and accessories protected inside.

A view inside showing the Yaesu FT-817, Yaesu microphone, Buddipole 4S4P battery pack, Doc Watson meter and power cables.

While I’ve watched every video I can find of the KX3, it is hard to judge size until you can actually hold it in your hand.  Like everyone else, I also want to be ready for the day the KX3 arrives.  Having a bag suitable to protect it if scheduling could allow for a SOTA activation is important.  But like I said  the LowePro Edit 140 looks bulky.  In my mind, bulk equals weight and extra weight makes my back hurt. 

But how do I know if my new Elecraft KX3 will fit inside my current LowePro Apex bag.  I could measure…but how fun is that?  Now if I’m reading the KX3 manual which was released just last week correctly, the KX3 measurements are 3.5 x 7.4 x 1.6 inches.  If I just had something of those measurements to test with I would know for sure. 

Now it wasn’t until I walked into the unfinished portion of my basement which I’ve been working on the past few weekends.  You can read blog postings here about my progress along with pictures.  Anyway, I had failed to clean up my mess after working for about an hour last night and just nearly tripped over my KX3….huh I mean the block of wood that is the same size of my KX3. 

As we all know, a 2 x 4 is not actually 2 inches by 4 inches.  The exact measurements are roughly 3.5 inches by 1.5 inches.  Hmmmm, that is pretty darn close to what the KX3 manual states for the KX3 dimensions.     I picked up the block of wood I had kicked away and measured the length.  It was 7.5 inches.   But would it fit in my bag?  Perhaps another way to ask this, if it fits…will it zip?

The KD0BIK KX3 prototype.  I sure hope my real KX3 receives better than this block of wood. 

Yep…it zips.  It’s a nice fit and still room for the large battery pack and other accessories.

Of course there is a fundamental design difference between the Elecraft KX3 and the Yaesu FT-817.  The control buttons and knobs and that super large display of the KX3 is a not factored into my 2×4 KX3 prototype.  However, if you review the above picture (the inside view) I will still have room and these will be protected.  I will probably slip the KX3 into a felt bag just for extra protection.  Where’s that Crown Royal bag I’ve been hanging onto?

Now please don’t rush out and purchase the LowePro Apex 120aw bag just because my 2×4 fits and zips.  I’ll make certain to create a new blog posting once my KX3 arrives and I have a chance to model it with the bag.  But if you already own this bag, it might just work out for you with the KX3.

Well this blog post and trying out my KX3 block of wood has been fun.  I now must get back to work. 

Until next time…

73 de KD0BIK

Building antennas seems to be getting to be a bit of a habit for me. This time I’ve bought a kit, for evaluation purposes. No really it is.

I was trying to think of a project that I could use at MX0WRC (Workington and district amateur radio club) to help give some direction to some of the members who may never have built anything other than the kit they built for their intermediate licence. So, as I’ve been roped in to give a talk on my portable set up, which consists of what I thought were low cost antennas I thought I’d found the right direction.

Low cost is not what I came across when researching simple antennas. It seemed that I was way off the mark for commercial offerings until I found a company in Germany called Nuxcom. They supply what look like simple yagi kits at realistic prices. By which I mean the cost of the materials isn’t prohibitive (For example from a raw material supplier 25mm box section can be bought for as little as £6-8 for a 1m length, enough for a 3 element 2m yagi and round tube for similar cost – and this isn’t cheap Chinese metal this is western European fully traceable materials! Don’t even get me started on the price of pipe clamps)

So, to placate my ever growing concern that prices are rising higher than a bankers bonuses, without any real justification I ordered one of the larger kits from Nuxcom, a 2 element lightweight 6m yagi. Purchasing was a bit drawn out as I placed an order and the ‘quote’ was returned with shipping costs added in a few hours later. But at £35 I was prepared to take a gamble, even is a third of the cost was shipping.

I’m expecting the kit before the weekend and I’ll do a little write up when it arrives. On the face of it the kit looks fairly simple in design without any bells and whistles, just what we need to add to the J pole, vertical and dipole designs that I plan on demonstrating.

What I’m really hoping for is a good value, simple lightweight antenna than doesn’t cost the earth so that the club members can learn and experiment without breaking the bank. More later.

Jim W1PID was at it again today:

Prepare yourself for some beautiful photos as well as a good story.


http://www.w1pid.com/spring/spring.html

On a side note, some of you may have noticed that I removed the “Capcha Code” from the blog comments area.  I did that in response to a couple of you out there that were having difficulties posting comments.  It’s a good thing that comments are on moderation and that Blogger has a good spam detection process.  Since removing the Code, I have been averaging about 15 – 20 spam comments a day!  Don’t people have better things to do?

Today was more like the end of April than the beginning of March.  Around lunchtime, the high was 68F (20C).  We really shouldn’t be seeing temps like this for another 4 to 6 weeks; but you know what?  I’ll take it any day.  Unfortunately, tomorrow is supposed to be more seasonable with highs only in the upper 40s (8C or so).

Tonight is the 40 Meters QRP Foxhunt.  I managed to get both Foxes Tuesday night in the 80 Meter hunt.  I worked Lee AA4GA quite easily; but was having a devil of a time with Ray KX9E in Illinois.  Turns out I had the K2 set to 1 Watt. When I bumped it up to 5, Ray was able to hear me a bit more easily.  I had forgotten that I had set it to 1 Watt over last weekend, and forgot to reset it.  That means I worked AA4GA in Georgia with only 1 Watt as it turns out. Cool!

72 de Larry W2LJ
QRP – When you care to send the very least!

My Gadget Gangster Parallax Propellor board has just modulated its first APRS packets. This is not down to any clever programming by me. I simply used the Spin APRS Object published by Richard, G3CWI based on code by Alex Erlank.

Richard had to make some changes to get Alex’s code to work and I had to change a few things as well. Mostly they involved replacing Richard’s callsign and position with my own! The AFSK output was connected to the mic input of my old TH-205E using a 0.1uF DC blocking capacitor. There is enough idle time at the start of the packet for VOX to be used if the transceiver supports it. Mine doesn’t, so for test purposes I manually keyed the radio’s PTT.

I found that my packets were not decoded by the Kenwood TM-D710 TNC when I used the option to include a path such as WIDE1-1,WIDE2-1. I’m not up to debugging the code. However, Richard had mentioned that calls less than 6 characters long needed to be padded with spaces so thanks to an inspired guess I found that that this applies to paths like WIDE1 as well.

There is a GPS object included with the code. I haven’t tried the Propellor with my GPS module yet, mainly because the GPS doesn’t pick up any satellites from inside the shack so I’d need to rig up a battery supply and take all the kit out to the garden to test it, where it’s damp and cold. (Yes I know, I’m a wimp.)

The AX25 object contains a section intriguingly called “demodulator” which has been removed. So it seems that there may be some Spin code that would enable the Propeller to be used as a TNC to decode and display APRS packets. That isn’t something I had particularly planned to do, but it would be interesting to see if it works better than the WB8WGA PIC based TNC that I built a year ago which is a bit fussy about the level of the input audio.

One of the options with the Propeller is a touch screen colour TFT display panel. With one of those a suitably clever person could make a very nice standalone APRS terminal. I think there’s an Ethernet module as well, so it could even be an IGate…

Some exciting news!  It looks like the new Baofeng UV-5R has arrived stateside.  Browsing Ed Griffin’s Wouxun.us, I’ve found a page indicating that it’s coming soon and the scrolling banner lists the price at $65 shipped (USA). Brick O’Lore has a great post showing some of the exciting new features:

BAOFENG UV-5R 4W
136-174/400-480Mhz

BAOFENG UV-5R The transcevier is a micro-miniature multiband FM transceiver with extensive receive frequency coverage,providing local-area two-way amateur communications along with unmatched monitoring capability

VHF/ UHF  DUAL-BAND TWO WAY RADIO

Frequency Range: 136-174 / 400-480MHz
Dual-Band Display, Dual Freq. Display, Dual-Standby
Output Power: 4 /1Watts
128 Channels
50 CTCSS and 104 CDCSS
Built-in VOX Function
1750Hz Brust Tone
FM Radio (65.0MHz-108.0MHz)
LED Flashlight
Large LCD Display
Hight /Low RF Power Switchable
25KHz/12.5KHz Switchable
Emergency Alert
Low Battery Alert
Battery Saver
Time-out Timer
Keypad Lock
Monitor Channel
Channel Step: 2.5/5/6.25/10/12.5/25KHz
Roger Set

With all the news about giant solar flares that could black out communications I was surprised to hear activity on 10 metres. I made a few contacts on SSB with my attic dipole, including A65EE in Dubai and TC2012WKD from Turkey: a special event station for World Kidney Day to raise awareness of the importance of kidneys to our health.

I like to operate on the highest frequencies I can. On the shortest wavelengths small antennas are at the least disadvantage.