AmateurRadio.com

The horizontal loop antenna has been dismantled and I have to do all radio work now with the vertical. Although I heard a lot of “new” DX this weekend I was not able to make many contacts. It seems the propagation is a little low. I tried on various bands, but not much luck. At least 1 new DXCC has been worked finally with a bit of luck JX9JKA from Jan Mayen heard me on my second call, he was working simplex on 17m. I’ve been trying for 7O6T today on 10m for half a hour, but no luck although he had a good signal. The pile-up was still too big. I hope JX9JKA will upload his log to LOTW some day as he asks 3 USD for a direct QSL!!! I’m sorry but I’m the last one that is buying his QSL. There were some special event stations this weekend from the “mills on the air” activation, although I saw a few on the DX cluster I’ve heard no one!

Bas, PE4BAS, is a regular contributor to AmateurRadio.com and writes from Groningen, Netherlands. Contact him at [email protected].

It’s been nice weather this weekend for the first time in ages. Yesterday as I was working around the house and in the garden, I put the DVAP on DCS005B and made some nice QSOs including Barry, G8SAU who was on Sheringham beach. I could easily hear the waves on the shore.

In the Win-DV setup – I noticed an APRS tab. I added my callsign, lat/lon and a comment and now when I start Win-DV, it shows the DVAP on the APRS map. Quite fun! I don’t have the nice, but expensive, GPS microphone for the E-92.

This morning, I decided to go and see my Mum, in Cheltenham. I took with me one of the Kenwood APRS handhelds which I have on loan. Cheltenham is well served by a couple of great APRS digis so I wondered what would happen. Sure enough my position was digipeated which was fun to see. It was also interesting to see APRS packets from the Severn Beach rescue boat being digipeated.

On the way back home, I operated 145MHz simplex. It was interesting to hear some SOTA activity from the Long Mynd (2Q0YYY/P) as well was Walbury Hill (MQ6BQA/P – who I had a brief contact with). Also a nice QSO with 2E0ZVR between Evesham and Pershore as I climbed over the Cotswolds to Stow on the Wold.

Later on this afternoon, I thought I’d check 50MHz and was pleased to work LZ2DF at over 2180km. Pete, 2E0SQL heard an SV9 and I heard a YU in KN00 – so some good distances around today. Looks like there were some 70MHz contacts to be had too!

Tim Kirby, G4VXE, is a regular contributor to AmateurRadio.com and writes from Oxfordshire, England. Contact him at [email protected].

The plan this weekend was to get some new DXCC's logged for the Diamond Jubilee award I am working on. As the saying goes "things did not go as planned" it's now Sunday aftern with next to no radio time in and the time I was on it seemed the bands out this way were dead. So it was off to plan "B"..... enter all the contacts I have made into a great Excel program made just for the Diamond Jubilee award. My count was 74 contacts.....so I thought anyway. You see this is my first effort at the DXCC  award and it seems I was off with my contact count. For example lets look at Jamaica and Cayman Islands.......I had Jamaica, Turks and Caicos islands then finally Cayman Islands oh to be in the Cayman's now but that is another post I counted that as 3..... NOT......It's only one (blog world tell me I'm wrong) I also had the same problem with  the West Indies, Great Britain and so on!!! So my count went from 74 to 63 confirmed DXCC's. So with that good news under my belt it was time to enter the information into the Excel spread sheet. The info needed is Call sign, band, date and time. I did have some troubles matching calls to countries as they were special event calls, they are no where close to the DXCC prefix. For example Gibraltar is a ZB2 prefix but my logged call is ZQ2FK. The call is a special call in honor of the Diamond Jubilee in England. Some other calls were special contest call signs. For example Martinique DXCC is FM8 or FM the contest call from there was TO5X....not even close. It was a frustrating event matching these calls to the DXCC country list at times. Now my plans are for late afternoon and evening' I am going to sit at the computer once again (this time with a Guinness) and log more calls into the Excel spreed sheet. 


Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

Thanks to Rob, G0JSO for letting me know about a charity event in aid of what I hope you’ll agree is an extremely good cause. Relay GB is a round Britain relay event attempting to break a world record and raise money for Brain Tumour UK, a leading charity committed to fighting and raising awareness about brain tumours. Rob organized and ran the leg from Caldbeck to Kirkpatrick-Fleming with some of his club mates.

Find out more or make a donation on the Relay GB website.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

I had a fairly successful day participating in the Armed Forces Day Crossband Test. To recap, I am currently at Fort McCoy, Wisconsin for a brief period of time supporting a National Guard exercise. Normally when I go around to different Army units and assist in their exercises I fly. But I decided to take my Toyota Tundra on this trip and re-installed my HF rig. I have never preiously particpated in the Armed Forces Day Crossband Test and have always wanted to…. this was my chance.

The AFD Crossband Test has two components to it. The first is to receive a message from the Secretary of Defense which is transmitted in various digital modes from different military stations during the day. The second part of the Test is to make contact with the military stations with the military stations operating in their band and the amateurs in their band (hence the term “Crossband”).

For the Secretary of Defense message I hooked my Rigblaster Plug & Play to my IC-706MKIIG and brought my laptop into the truck (which has fldigi installed). The Rigblaster worked like a charm and I was able to copy the SECDEF’s message from WAR (at The Pentagon), AAZ (Fort Huachuca, AZ), and AIR-2 (New York). All these transmissions were in RTTY, which fldigi was able to read without issue. Now I need to print out copies of the messages I copied (which are the same, except the header information which reflects what station was transmitting the message) and send them in to the corresponding station. In return, I believe, I’ll receive a certificate from the SECDEF (suitable for framing, I’m sure).

The crossband contacts caused me to take a crash course in split frequency operations for my IC-706MKIIG. Fortunately I had my Nifty “Cliff Notes” version of the manual and was able to figure it out pretty quick. Although the actual execution took a bit of time to get down. First, obviously, I had to hear the station calling. MARS HQ publishes ahead of time a list of each station and the frequency that they will transmit from. I built a spreadsheet that allowed me to sort by frequency which made it easier to search for the transmitting station. The searching was done in the IC-706MKIIG’s VFO A. Once I found the station, I had to listen for them to announce the amateur frequency they were listening to… which most stations did periodically. Once I got their listening frequency, I flipped over to VFO B, dialed up the frequency, tuned the Tarheel screwdriver antenna, flipped back to VFO A, then hit the Split function, and waited for a chance to call. In the end, I was successful in contacting five different stations: WAR (at The Pentagon), NWKJ (located on the USS Yorktown, Charleston, SC), NMN0CQQ (located on the USS Midway, San Diego, CA), AAZ (good ol’ Fort Huachuca, AZ), and NWVC (a Navy MARS station in Indiana). For these contacts I get to send in my QSL card and hope for a response.

None of this was exotic DX but it was fun and exciting… and a bit challenging trying to do it all from inside my Toyota Tundra. I hope I am able to particpate again next year.

$3 AIR-2 AIR-2 MESSAGE FOLLOWS

RYRYRYRYRYRYRYRYRYRYRYRYRYRY
RYRYRYRYRYRYRYRYRYRYRYRYRYRY

DE AIR-2 AIR-2 MESSAGE FOLLOWS

SECRETARY OF DEFENSE

ARMED FORCES DAY 2012 MESSAGE

TO AMATEUR RADIO AND
MILITARY AUXILIARY RADIO SYSTEM
OPERATORS

QUOTE

FOR THE PAST SIXTY-THREE YEARS, OUR NATION HAS RECOGNIZED
THE DISTINGUISHED GLOBAL SERVICE OF OUR UNITED STATES
MILITARY DURING THE ANNUAL ARMED FORCES DAY CELEBRATION.

AMATEUR RADIO AND MILITARY AUXILIARY RADIO SYSTEM OPERATORS
PROVIDE ESSENTIAL CONTINGENCY COMMUNICATIONS TO RELIABLY SUPPORT
OUR NATIONS MILITARY AND GOVERNMENT AGENCIES. YOUR SUPPORT OF
COMMUNICATIONS BETWEEN DEPLOYED SOLDIERS, SAILORS, AIRMEN,
MARINES, SUPPORTING CIVILIANS, AND THEIR FAMILIES IS DEEPLY
APPRECIATED.

ON BEHALF OF ALL UNIFORMED SERVICES, I EXTEND MY SINCEREST
APPRECIATIMN FOR YOUR HARD WORK, SELFLESS DEDICATION, AND
VITAL SERVICE TO OUR GREAT NATION. WELL DONE!

/S/ LEON E. PANETTA

SECRETARY OF DEFENSE

UNQUOTE

APPROVED FOR TRANSMISSION,

DE AIR-2 AIR-2
SK

Scott Hedberg, NØZB, is a regular contributor to AmateurRadio.com and writes from Kansas, USA. Contact him at [email protected].

A reader sent this comment on my post about Heathkit’s demise:

“It would be a limited customer base, as with all the China crap coming in
hard to compete. Also noticed that they are selling 2mt/440 ht’s and
advertising that you do not need a license!!!look for interference to
public service and emergency com, reports against amateur radio, going
to be a tough nut to crack”

I have to disagree.  First of all, some of the “crap” from China is actually pretty good, and giving the “big 3” some serious competition.  You know, there was a time, back in the early seventies when everyone referred to the influx of Japanese-manufactured electronics as crap too.  I remember this first-hand, as my interest in SW and AM DXing started in 1972.  Look where that has gone.  The Japanese are now the manufacturers of choice for our radios.  Now, I cannot say that all of these new low cost radios are good (first-hand experience with a radio from FDC backs that up for me), but the BaoFeng UV-3R has set a new bar for value in a low-cost mini HT, as well as the highly-regarded Wouxun radios.  It should be interesting as these companies evolve.  Mobile radios are just starting to trickle in now, and who knows what’s next.  Outside of radio, what about smartphones?  Where are most of them made?

I watched this same thing happen with Shortwave receivers over the last decade.  Companies like Degen, Tecsun, and Kchibo, first got into this market by being the manufacturers for labels like Grundig-Eton.  The early radios were not good, but then a funny thing happened.  The engineers listened to the public and made changes.  They adjusted the performance and feature-set of these radios based on what the users were asking for.  This is something that their predecessors never did.  Sony, Panasonic, Philips, and even Taiwan’s Sangean, rarely made changes based on the enthusiasts comments and reviews.  The result is that some of the best performing portable SW receivers for the money now come from China.  Panasonic, and Magnavox, are out of the market here.  Sony only makes one viable offering now, and Sangean continues to get mediocre reviews, after such a promising start.  I personally own a few Tecsun, and Degen radios and although the build quality is not quite as good as the Sony, it’s VERY close now.

As far as selling to the non-licensed public, that problem has always existed.  I don’t think that you were required to produce a license to buy any of the HTX radios at Radio Shack in the eighties and nineties, as well as the various commercial offerings they had.  You were told by the packaging, and again in the manuals that you were required to have a license.  Very few people at hamfests and flea markets ask for licenses before taking the cash from their potential customers.  Add to that garage sales, and classified ads, and you can see that the ability to buy un-authorized radio equipment has always been there.  Recent experience with jamming in my area led me to a small history lesson while investigating the source of the interference.  This has been going on for a VERY long time, and you’d be surprised how much of the problem is caused by licensed Hams.

Craigslist, and eBay have made this easier, yes, and I believe that the equipment being sold should at least be restricted to its intended purpose (limiting Xmit frequencies for Amateur equipment), but we will never stop the sale of equipment to the unlicensed public, just as we will never stop music and software pirating.

The biggest travesty here is the existing players not recognizing the changing market.  Kenwood’s new rig is gorgeous, but is another multi-thousand dollar rig what this hobby needs?  What the HF side of the hobby needs is a competent, basic 160-10 (or 6) transceiver that can keep the interest of a newly licensed ham going, with a target sell price UNDER $500.  50-100 watts would be ok at this price-point, with the option of adding some power later.  I honestly feel that if Kenwood, Yaesu, and Icom don’t wake up, and adjust to the changing market, they might go the way of the classic Shortwave manufacturers.

Sorry for the long editorial, but this is a sensitive subject for me.  I have only been a ham for 9 months, and with all of the obligations I have, and trying to make sure there’s something left for retirement, plunking down $1000 on a radio at the moment is out of the question.  Many of our new hams are in this same position.  Instead of having most of us stay as Technicians, it would be nice to get these new hams interested in something other than their newly acquired VHF/UHF privileges.  A General ticket is a fairly small step from Technician, and having some economical starter radios would help

Some of the kits, in my Kit Roundup post fit the bill, but most are CW kits.  The SSB kits available are usually low power.  There are a couple of examples with a bit more power, but fully assembled the price is already in the Alinco DX-SR8 range.  Having said that, the Alinco is probably the closest rig to what I’m thinking of price-wise, but seems to get rather mediocre reviews.  I guess for $519 you can’t be all that picky.

This is all my own opinion of course.  Feel free to discuss in the comments.

–Neil W2NDG

Neil Goldstein, W2NDG, is a regular contributor to AmateurRadio.com and writes from New York, USA. Contact him at [email protected].

[Update 6/8/12: The problem was the coax. Thanks, Antonio, for getting it fixed! (click here for story).]

[Update 5/16/12: Yesterday my EchoLink radio went deaf. For some reason the SWR has soared — the problem is with the transmission line and/or the antenna. Happily the antenna has a lifetime warranty, so if that’s the problem it won’t cost me anything. The hard part is getting at it!]

Finally! My EchoLink station, in the works for a month and a half, is on the air and on the Internet. If you want to give it a whirl, go right ahead! It’s listed as NØIP-R, node 695717.

The idea for this EchoLink station sprang from the SKYWARN class I attended a month and a half ago. I was lamenting the fact that Granite Falls, the city where I live, didn’t have access to the hub-and-spoke repeater system used by the Chanhassen office of the National Weather Service (click on the map to learn more):

So I asked Dean Herzberg, NYØI, if there were any plans to connect his nearby repeater to the NWS station with EchoLink. Dean replied, “No plans, but I would surely authorize the connection. I can’t, but you could!”

Um, me? It hadn’t dawned on me that I could do this myself. But once Dean gave me the nudge, I was off and running (or at least hobbling enthusiastically). I thought, hey, I already have a Linux/Ubuntu server running 24/7, and I have an old Yaesu FT-1500M in a box — all I need is an interface and a radio.

So I bought a RigBlaster Plug-n-Play USB interface from Ham Radio Outlet and a dual-band antenna off eBay from Edison Fong, hooked it all together and gave it the ol’ smoke test.

It worked! At first I just set it up on a simplex frequency and connected to the EchoLink test server, with the antenna propped up against the wall. That way I could work out a few bugs at low power and in relative privacy.

The whole thing went on the back burner for about a month due to other priorities, but finally I punched some coax through the exterior wall into my bedroom. That’s where the server has been for a couple years, so that’s where the station went (I have a very patient wife!). I terminated the coax with an SO-239 bulkhead connector mounted on a blank wall-plate. On the exterior of the wall I applied hi-tech IPORS caulking compound (Individually Packaged Orally Reconstituted Sealant, i.e. chewing gum!).

But I just couldn’t bring myself to mount the antenna up there on the peak of my gable. Part of it is because I’m slightly handicapped, but mostly it’s because I would rather give up my ham license than go to the edge of my roof up that high. NYØI to the rescue! I’ve written about Dean before on this blog. He’s a great guy who would give you the shirt off his back. Well, Dean came over a couple days ago and put up my antenna for me, then joined my family for lunch. He’s a MN State Trooper and I’m an ex-cop from the Twin Cities, so we had plenty in common to talk about.

I’ve had to fiddle with the settings in EchoLink to get it to work right, but it seems to finally be working great. The two hardest things to get right were decoding DTMF tones properly and keeping two repeaters from chasing their tails when EchoLinked. After finally figuring out the right DTMF settings, I nearly pulled my hair out trying to test them with my HT. Finally I realized that I was de-sensing my Yaesu FT-1500M every time I transmitted with my HT! When I went a block away, it worked fine.

Now the National Weather Service office can EchoLink directly to Dean’s repeater so that they can hear SKYWARN spotters here in Granite Falls. Alternatively we can link his repeater with the repeater in Madison, to which the NWS already EchoLinks during severe weather — all you have to do is punch in the right DTMF code, and my EchoLink station will dutifully link them up.

Now I just need to get a better smartphone so I can run that EchoLink app . . .

Here are some photos of Dean mounting my antenna and of the station itself:

Click to view slideshow.

Todd Mitchell, NØIP, is a regular contributor to AmateurRadio.com and writes from Minnesota, USA. He can be contacted at [email protected].