AmateurRadio.com

As the title reads, my 2012 Challenge of having a QSO a Day is on the way to the half way mark.  One more month and we’ll close out the second consecutive quarter, six months and 50% of the year having completed a QSO each day. 

I have admit, the fun really does continue.  I worried that either I might get bored or find it “a chore” to get down to the shack each and every day.  However, I’ve settled into a routine and it works nicely. 

I use UTC as my time and date.  During this time of year, 0000z occurs at my local 6 PM.  I usually get home from work by 5:30, we eat and then I head down to the shack usually around 6:30 PM (0030z).  I log my contact(s) then spend the rest of the evening with my wife.  We did have some nice band conditions during parts of May and I would head back down to the shack for 30 minutes or so around 0400 UTC. 

During much of the work week, I’m mainly concentrating on getting my one QSO worked and logged.  However, on the weekend (when I’m not working on the new shack) I’ve been working special event stations and having fun in the various US State QSO parties taking place on the bands.  By the way, have you listened to my new weekly PARP Plus edition podcast?  PARP Plus is released on Monday evenings (0000z).  Each episode is around 15 minutes in length and I provide a rundown of all the activities taking place in the week and weekend ahead.  The PARP Plus edition covering this week and this coming weekend is available now.

Also, the path to DXCC continues to add up.  This month I worked a total of nine DX stations with three being new DX entities.  The new DX added in May was Bulgaria, New Zealand and Turkey. 

I also decided to map my May QSO’s.  I’m using a web tool created by K2DSL called ADIF to Map to create the image below. 

Finally, May was a productive month for work in the new basement ham shack.  As I updated you all earlier in the week, the drywall work is done and the texture process is also complete.  We picked up paint and paint supplies last weekend and hope to get started next weekend.   It’s all finally starting to come together and I’m very pleased with how it looks.  It’s going to be a fantastic ham shack, home office and man-cave.

The QSO breakdown for May is as follows: 

Mode
Number QSO’s

JT65
61

SSB   
37

PSK31
1

Additional notes of interest:

DX Stations Worked in May – 9

New DX Entities in May – 3

Total QSO’s for 2012 – 577

Total consecutive QSO days – 152

Days left in 2012 – 214

Until next time…

73 de KD0BIK

I never really thought I would be saying this but I have entered, or rather plan to, enter a contest. Sports radio as it is sometimes called always seems like a bear garden on HF with just about every station barking out ‘CQ Contest’ to claim a few more points. To me it doesn’t sound like a sport unless you’re keen on drowning out the competition.

I have mostly avoided contests as to me it has the perception of something where ‘He who has the largest bank account wins’ and the is little room for tiddlers. So to challenge this perception I shall be entering into something that I think / hope will be a bit more relaxed. The UKSMG Summer Es contest might be the highlight of the 50Mhz calendar but for I shall be operating at the most for 6 hours. The likelihood it will be around 3 hours at best as a tiddler station.

I will be operating at best 100W from my IC7000 into my homebrew 50Mhz vertical which so far has escaped the operation in anger mode it needs. Part of the reason for this is to see if I actually enjoy it. The other part is to do something different.

I’ve always had a bit of a soft spot for 6m but have no idea why as my QTH precludes much in the way of ‘proper’ antennas and so far I have only made a few contacts on the magic band. Most of these contacts were a few years ago when I could put a beam up in the garden for a few weeks. This needs to change in my opinion and this weekend is the best opportunity for me for a while.

So if you happen to be on the magic band, listen out for the tiddler that is my station (operating as GM7KSE as it happens). The contest starts on the 2nd June at 1300Z

Yesterday it was my birthday
I hung one more year on the line
I should be depressed
My life’s a mess
But I’m having a good time.

Paul Simon – Have a Good Time

It’s become a tradition that I play this song on May 31st. I did so every year, since I discovered the great Paul Simon. Just a reflection on my own life and every year the song seems to describe exactly how my life is going: it’s a mess, but I’m having a good time.

I make my own good time and so I was good to myself this year. I ordered an Argents Data Systems APRS kit, because I’ve been longing to do something with APRS for a long time now. I’ve already had some success with Xastir and SoundModem decoding APRS signals on my laptop, so I’m good to go now.

My wife was good to me, too, because she brought a Baofeng UV-5R back from China. Even cheaper than the export model, with a cute Chinese lady inside and a lousy Chinese manual. In China they use simplified characters, but also the use and translation of foreign phrases and words is different than in Taiwan. So over here in Taiwan we translate “menu” as 功能表 or “Function List”. Makes sense, right? In China they translate it literally: 菜單 or “Dish/Vegetable List”, like in the different dishes listed on the menu of a restaurant.

Enough has already been written on the Baofeng UV-5R. I can only add the following: “What an ugly looking thing!” The designer should be subjected to some serious Chinese torture. Not that we Westerners don’t mess up every now and then. When having the HT in my hand I constantly had to think of this beauty made by the French truck maker Renault.Maybe theses things are for “manly men” and I’m not man enough to appreciate this kind of design.

Anyway, I am also going to make my foray into the SDR world, because my lovely wife also brought back an DVB-T USB Television stick with a RealTek RTL2832U inside. There has been a lot of talk about these sticks lately and for only US$11 is it worth a try. I’ll keep you posted, but for now I only tried the TV reception (great) and DAB radio stations (non what-so-ever in Taiwan! It seems FM radio is here to stay for a long time).

Together with the other projects that are under way I will have a busy summer holiday.

Welcome to the 83rdest episode of Linux in the Ham Shack. Freshly back from the Dayton Hamvention, Russ jumps in by telling everyone his experience at the show this year. The short version: It was great! From there, things move on to a question of FCC rules, at least in the mind of one ham.

One of the topics that kept repeating at Hamvention was: What is a good contest logger for Linux? Up until recently, it was hard to think of one. The ncurses-based application yfktest is out there, but thanks to IZ3NVR, our hosts discuss a new option. Tune in to find out what. There’s also some feedback, occasional rambling and hardcore lunacy. Everything you’ve come to expect from an episode of LHS.

73 de The LHS Guys

I did a complete inventory of my KX3 hardware and am sad to report that I am missing some screws and lock washers.

I sent off an e-mail to Elecraft letting them know what was missing. Normally, I wouldn’t even bother, I’d just go off to Home Depot or Lowes to pick up equivalents, but these screws are black. That means they are going to show from the outside, and I don’t think either store will have black hardware.

I might have to stop off at Greenbrook Electronics on the way home from work tomorrow, in the off chance they might carry black hardware.

I know what you might be thinking, but no …….. I made sure to do the inventory in a box top, so that nothing could roll off the table and on to the floor – or worse.

To their credit, Elecraft sends a small bag of “spare” hardware. Unfortunately, nothing that I need is in there.  I will try to start the build tomorrow night, but I think right from the get go, I am going to need some of these missing screws.

Heavy sigh.

Hmmmmm ….. the good news is that I may only be one screw short.  In a burst of inspiration, I went down to the basement to the parts drawer where I kept screws that were left over from my K1 and K2 builds.  I think I can make do until the missing parts arrive.  Moral of the story? Don’t throw stuff like that out!  But don’t become a hoarder, either – yes, I know it’s a fine line!

72 de Larry W2LJ
QRP – When you care to send the very least.

When I returned from my operation as TI7/K2DBK in Costa Rica last summer, I didn’t receive any QSL cards immediately. I wasn’t very surprised by that, as I hadn’t worked all that many stations, Costa Rica isn’t a particularly rare entity, and I assumed that for the stations outside the US (where it’s a little less common), they’d be QSLing via the bureau or Logbook of The World. Since I had no cards that I needed to respond to, I focused my efforts on getting my operation approved for DXCC credit and getting a certificate so that I could upload the contacts to the Logbook of The World. As I wrote (here and here), that turned out to be an interesting challenge, but I was able to get that approval.

I didn’t really think about QSL cards after that until a few months ago, when I started receiving QSL requests via the ARRL DX bureau service. As I’ve written in the past, the bureau is a way to exchange QSL cards which, while inexpensive, can be quite slow, so lag of 6 or 8 months between the operation and the time to receive a card via the bureau isn’t terribly unusual. (Sometimes it can be much, much longer. I’m still receiving QSL cards via the bureau for my operation from Grand Cayman in 2007, and others for operations from home back to 2001. The bureau service itself isn’t quite that slow, but often folks like myself will discover after a few years that a particular card is needed.) When I first received those bureau cards, I realized that I had to create a QSL card but it wasn’t a high priority, as I wasn’t planning to send cards out via the bureau for at least a few months.

Things changed about a week ago when I received the first of several directly mailed QSL requests. Although it’s common to send a QSL card relatively soon after a contact, particularly if it’s sent “direct” (meaning mailed directly to the station, not via the bureau), sometimes stations will not realize until much later that they “need” the confirmation, or, as I’ve done, sometimes they simply forget at the time of the contact. Regardless of the delay, I have always made it a point to respond to direct QSL cards as soon as possible (normally I’ll send out a return card the day after I receive one). Unfortunately, I couldn’t do that because I still had the creation of the QSL card for my TI7/K2DBK on the “to do” list. The receipt of the handful of direct requests (all of which were from non-US stations) was the kick that I needed to get going designing my card.

I’ve always designed and printed my “special” cards myself, because the number of cards that I typically need is usually so small that it’s not worth it to have them professionally printed. There are a number of tools that can be used for the actual design, but for me, the hardest part is always coming up with an attractive layout. However, I’ve come up with sort of a standard that I’ve used on multiple cards, and I try to follow that now for each new one I create. I’ve followed that “standard” for the latest card, which is to use a background image shot with one or sometimes two “inserts”, along with a QSO information block. I’ve always used my own photos, not a “stock” photo, as I think it makes the card more personal. I usually include a picture of myself on the cards because I think that makes it even more personal.

When I first started printing the cards, I though that I’d use a gloss “postcard” printer stock (like this from Staples), separate the postcards (they are set up for 4 on a page that have perforations to make separation easy) and just mail them. However, I realized that the size of each card was bigger than the standard QSL card size and I had trouble fitting them in some envelopes. As a result, I wind up using a paper cutter to trim the cards down to about 5.3″ x 3.5″. Most likely the next time I buy paper stock for my printer I’ll just use plain “everyday” inkjet photo paper since it should be a bit less expensive.

With a card designed, I printed off enough copies on my inkjet printer to respond to the direct requests, and I’ll be working on responding to the bureau cards next. I think that this particular design worked out really well, and the color of the sand on the beach is light enough so that I can just use a regular pen to fill in the QSO information in the information box and it’s quite readable.

On Sunday afternoon, while the WPX contest was still on, DX Sherlock sent me an email to say that there was a possibility of Sporadic-E propagation on 4m from my location. Getting equipped for 4m is something I’m going to have to leave for another year – right now I’m not steady enough on my feet to go clambering about in the attic making additions to my antenna farm. But I do have a 6m antenna, though it’s only a dipole. The KX3 was plugged into it, so I had a tune around 6m, heard a few stations and managed to work OK2OV with 59 reports both ways. Not bad for 10W to an attic dipole.

Station of OK2OV, Czech Republic (from qrz.com)

I was quite tired after my session in the CQ WW WPX contest so I called it a day. The following morning DX Sherlock sent another email alert to say there was possible Sporadic-E on 6m. I quickly switched the KX3 on and sure enough, there was a big Sporadic-E opening in progress. I made 18 contacts in all into France, Spain, Italy and Slovenia and heard OK2OV for a second time. Some of the signals were absolutely enormous and I received 59+ signal reports. This was with 10W of SSB to a dipole, remember.

Hopefully there will be more Sporadic-E fun before the end of summer.