AmateurRadio.com

No room for Oliver on the old desk

The new desk twice the size

The first half of August sure has been busy around the shack here, not busy with on air time but with getting things done. I have built the A A Engineering smart battery charger for my Elecraft K2. I will be posting the build in the near future. On this project for the first time the during the "smoke test" I actually had SMOKE!!! With kits I have found some of the final check out testing is what I call "destructive" testing as opposed to non destructive testing. Going to a destructive testing  with the Smart battery charger post. One of the kits I built just a short while ago was the QRPometer and it did not have a case...well it does now and that too is going to be another post. I am really not finished with that case yet. I was at the
electronics store the other day (picking up parts as a result of a destructive test going wrong) and saw a neat 9 volt battery holder I am going to add to the QRPometer case. I also have sold all of my items that were up for sale and I have the funds to order my Elecraft KX3. It's not going to be here until  October but that will give me time to read the manual and set up a place for the radio. While on that topic with some of my funds I went online to Ikea and purchased a much needed larger table for my kit building. The old desk was just way to small and things were falling off. The old table was actually a computer desk and it now is off to the side in my shack with an  iMac (27 inch screen) one that Julie donated to me!!! So the new Elecraft KX3 is going to run on Mac software.

iMac waiting for the KX3

F8DGY's antenna

The on air time has been very limited as having to get things done around the house and shack the rig really has not been turned on. I did manage to get some radio time in late last week in the evening. I heard clear as a bell Chris F8DGY calling CQ on 20m. I dropped the K3's power down to 500mW's and gave him a go. He came right back to me with a 579 report. It was a fast exchange and he was off answering others. For me that that a 7,597 miles per watt contact.


Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

Several times a week I have been on the brink of writing this. It’s time to get it off my chest. I curse whoever it was that decided to place the caps lock key to the left of the A on the keyboard. For what seems like one time in two when I go to type a letter “a” I hit caps lock instead (or as well.) I hAVE USually typed several more letters before I realize my mistake and have to bACKTRack, to the accompaniment of loud cursing.

A couple of decades ago, in the days of MS-DOS, it was possible to write a little program called a TSR (from Terminate and Stay Resident.) This program could intercept your keystrokes and convert them to anything you liked. I wrote one that trapped Shift+3 and turned it into the pound sign instead of the US default hash (#). Microsoft provided a utility called KEYB.COM that could do this but it occupied several K of memory and in those days you counted every byte.

I don’t know if that is possible in Windows. But I’d really love a program that could intercept the caps lock key and turn it into an A (or rather, an a) unless you gave it a long press!

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

Last weekend I decided I wanted to put four or five new frequencies into the memories in the UV-5R. No drama – I got out the USB lead, plugged into the laptop and was about to start the programming software, when I noticed that the driver hadn’t started properly – no Com port available!

Odd – it was fine last time I used it. So I tried reinstalling using the installer. No luck. Tried another version of the installer, no. Tried a generic driver. No. Then I remembered there was something funny about having to manually install ser2pl.sys. No.

After all this about an hour had passed and I only wanted to program about 6 simplex frequencies in. My patience was exhausted and I decided to program it manually.

This weekend I found the original install CD for the programming lead and I thought – great, I can definitely make it work now. Plugged the lead in, ready to set up the drivers and…

Yes, you’ve guessed it, it worked straight away without me having to reinstall or do anything. Why? I have no idea…..

Tim Kirby, G4VXE, is a regular contributor to AmateurRadio.com and writes from Oxfordshire, England. Contact him at [email protected].

Amateur Radio-wise, that is!

At the VE session this morning, we were able to welcome three new Hams into the fold. Well, make that two and one revert.  One of the candidates was a Ham years ago; but let his license lapse. So maybe it would be more accurate to say that we welcomed three potentially active Hams into the fold.

I guess I am from another era; as I get frustrated (a bit) when the first question out of a new Ham’s mouth is something to the effect of, “So where can I get a good price on a dual band handheld?”  Man, when I was studying for my Novice ticket, the LAST thing I wanted was an HT. All I had my sights on was HF and working the bands.  In fact, I didn’t get my first VHF radio until nearly a year after I was licensed.

I got my ticket in December of 1978.  Spent November and December and part of January assembling my station, which was a “pre-owned” Drake 2-NT transmitter (which was my Christmas gift from my parents that year) and a Heathkit HR-1680 receiver which I saved up for and built all by myself. That receiver was the very first of many Heathkits that I was to build.  Between buying, building and making an antenna, I had my first QSO on January 29th, 1979.  And it was an HF QSO.  I still have that QSL card, framed in my basement.  Can’t recall the entire call of the poor victim that I plied my nasty fist on, but I do remember his name was Adam and he was KA9something.

My first VHF radio was a Tempo1 handheld, the very first to have a synthesized VFO, not relying on crystal control.  I bought it a year later, after I had upgraded to General, specifically to assist in the 1980 Winter Olympics Torch Run.  Those were the Lake Placid “Do you believe in miracles?” Olympics and the torch run  traveled right through Central NJ on its way to Lake Placid.  I was with a local club providing communications in an ARRL led effort.  I still have the Public Service Commendation hanging on the shack wall that commemorated that event.

But for me, VHF and UHF were never a Number One favorite. Don’t get me wrong, I have spent A LOT of time on UHF and VHF repeaters – making friends, doing public service and all kinds of stuff.  But in W2LJ’s mind, when Ham Radio pops up in a little thought balloon, it’s always a picture of an HF radio, making worlwide contacts.  Just me, I guess.

I had another treat this afternoon, working my good friend, Bob W3BBO, who also took the plunge and just very recently got a K3.  He finished building his this past week and this was our very first K3 to K3 QSO.

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

that we bloggers never get on the air and just sit behind the keyboard all the time ……

I had a very FB QSO with fellow blogger Dan KB6NU on 30 Meters tonight.  I was calling CQ and Dan answered.  Dan is working on his Extra Class study guide, so we chatted for a bit and reminisced about our own exam experiences.  Dan and I have actually worked numerous times on the HF bands – it’s always nice to run into him.

That was followed by two more rag chews, one with Tom, N8TL and Jim NH4C.  Both were on 30 Meters, also.  The 88′ EDZ antenna seems to do a very good job for me on 30 Meters.  A far cry from the G5RV.  Not to say that the G5RV wouldn’t load on 30 Meters – it did.  But I get much better signal reports with the EDZ and I feel like I’m warming up the ionosphere instead of just the antenna wire.

I was going to go to the NJQRP meeting tomorrow; but received a request to help out at a VE session with the Raritan Valley Radio Club at the Somerset County Fire Headquarters building in Hillsborough, NJ.  It’s been a while since I have participated in a VE session and I do want to keep my credentials up.  Besides, it’s a much closer trip for me to Hillsborough, than it is to the NJQRP meeting.  I’d say the trip to the VE session is about a 1/2 hour to 40 minute (if there’s traffic) ride from here. The ride to the NJQRP meeting is an hour and a half from here – easy.  With gas prices going up yet again, I think I’ll stay closer to home.

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

Dr. Bob Heil, K9EID, is the founder of Heil Sound and host of TWiT.tv's Ham Nation which streams live each Tuesday at 6:00pm PT (9:00pm ET) at http://live.twit.tv. Contact him at [email protected].

It was a tough day at work, but ……

I was really lucky tonight and both Foxes in the 20 Meter QRP Fox hunt were loud into New Jersey. I got both their pelts quite quickly and they were both VERY honest 599s into NJ.  This was kind of an unexpected surprise, and a quite welcome one at that. Tuning around 20 Meters a few minutes prior to the hunt, I saw that the ambient noise level on the band is around an S7. I was expecting to be skunked as a result.

But TJ W0EA and John K4BAI have superb ears and both heard me really quickly. And as a side benefit of working them so early, I can now sit here and relax and listen. It’s like listening to a fine piece of music. Both are masters of their frequencies – firing off QSOs with liquid ease.  If not like a symphony, then it’s certainly like a fine ballet; or perhaps akin to enjoying a piece of velvety smooth chocolate.

Bravo to both Foxes. It was not only good working both of you; but a joy to listen to your efforts working others.  Fine codesmanship (new word?) is a wonderful thing.

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].