Archive for the ‘ham’ Category

Operating Bicycle Mobile with Mike Nickolaus, NF0N – ETH073

Everything Ham Radio Podcast Logo - Arduino

Thinking back to when I was a kid, I used to love riding my bike. My friends and I would get up early every morning and go riding our bikes for about an hour before school started. Then after school we would leave and ride our bike for another two hours or so until it was time to go home for supper.

I wasn’t a ham back then, but I sure loved that bike. Fast forward a few years to my junior year of high school when I got my ham license. I didn’t ride my bike so much anymore, because I didn’t live in town anymore and would’ve been a seven mile ride to and from school and on roads that probably were not the best roads to ride on.

I did start to merge the hobbies somewhat around this time though, however it isn’t anywhere near what Mike and the rest of his club does on theirs. I would clip an HT to my belt and the speaker mic to my shirt and that was the about it.

In today’s episode, Mike talks with me about how he does it, how he operates while being Bicycle mobile. We talk about some of his experiences and some contacts he has made.

Http://www.everythinghamradio.com/podcast/73

Arduino Projects for Amateur Radio with Glen Popiel – ETH072

Everything Ham Radio Podcast Logo - Arduino

Do you want to get back to the original roots of Amateur Radio? Maybe you are a new ham and you have a DIY side? Maybe you just want to try something new? There are so many things that you can do with an Arduino that cost only $4 or so! Anything from a morse code keyer to a 40m QRP CW Radio and a whole lot in between. You can even do things with an Arduino that has nothing to do with amateur radio but you will find a use for.

In this episode with talk with Glen Popiel, KW5GP the author of the ARRL published books, Arduino for Ham Radio and his new book that just came out, More Arduino for Ham Radio. He is also the author of the ham mesh networking book, High Speed Multimedia for Amateur Radio.

We had a great conversation and it made me literally go to the ARRL website and buy his new Arduino book while we were recording! Check out the show notes of this episode to listen and to get more information about what we talked about. There are also links to his books that you can go to to buy one for yourself.

Check out the show notes!

Field Day 2017 with Ian Kahn, KM4IK – ETH071

Everything Ham Radio Podcast Logo - Field DayThe biggest hamfest is over, but the biggest ham radio on the air event is quickly approaching! Yes I am talking about Field Day 2017! Back in episode 67, I had Ian on and we talked about PSK31. During that interview he mentioned that he was the Field Day Chair for his radio club, the North Fulton Amateur Radio League, so I asked him to come back and talk to us about Field Day.

We had a great conversation about what Field Day is, some general information about it, what its like to be the Field Day Chairperson and be in charge of planning the event for your club and wrap it up with things that his club does during Field Day and what goes on afterwards.

Check out the show notes of this episode for more information about things that we talk about, links that we mention and probably some that we didn’t. The show notes can be found at:

http://www.everythinghamradio.com/podcast/71

ETH067 – I Think I Have The PSK31 Bug Thanks to Ian Kahn, KM4IK

Everything Ham Radio Podcast Logo - PSK31

Over the past 67 episodes of my podcast, there has been a couple episodes that have really peaked my interest and kind of lit a fire under me to do whatever that topic is myself. Things like APRS back in episode 6, and Broadband Hamnet in episode 29. However, neither of those got me back onto HF. My HF rig has basically gone unused for close to seven years or so and has been in a box for the last three years!!

I honestly have never been big on voice communications on HF. All of the times that I have operated on HF has either been at home calling CQ or looking for someone else calling it or during things like Field Day. At home I rarely got anyone to answer my CQ call; I think I was getting out. During field day it was, basically the exchange and on to the next contact. Neither of these things were very fun to me.

Digital modes, especially thing like PSK31, seem to be right up my alley! So I decided to look for someone that knew something about it, that I could learn from. I finally found Ian Kahn, KM4IK and he agreed to come onto my show and talk to me about it. We had a great conversation and I learned a lot. If you are interested in learning about PSK31, head over to the show notes of the episode, you can listen right on the page, or you can search for Everything Ham Radio on the major podcast directories.

http://www.everythinghamradio.com/podcast/67

Head Copying CW

There's more to using Morse Code than Learning Morse Code

It's been about 18 months since I started learning Morse Code in order to use it for making CW contacts in amateur radio.  Learning the code allows you to recognize the letters, numbers and punctuation but it's akin to when you learned your "letters" when you were a child.  Knowing the alphabet is just the first step to "reading".  So it is with learning Morse Code.  



When I started making contacts using CW it was fairly formulaic. I even had my QSOs written out with regard to what I was planning to send and what I expected to hear during each exchange. 

But then my copy and sending speed increased beyond 17-19 words per minute and I could no longer type or write down what I copied fast enough to comprehend and I began to head copy.

Head Copying

Head copying is when you stop transcribing what you hear and listen to it as you would a conversation and only take notes on salient points.  This was a big step for me and it has been a difficult transition.  

Using Morse Code to communicate at speeds faster than it can be written straddles the weird place between hearing and reading.  We learn morse code by its sound but at slower speeds, say below 30wpm what we are "hearing" is letters, not words so we are having to buffer those letters in our head to spell words.  When we "listen" to someone speak we are not hearing them speak letters but complete words, when we "read" our brains are not looking at individual letters but at complete words.  When we hear Morse code at 20-25 wpm we are hearing very slowly pronounced words and it is a new skill that has to be learned.

This skill is necessary for ragchewing.  A ragchew is a long QSO between two amateur radio operators. This is generally what amateur radio operators are doing on the radio when they're not contesting, ...


How to practice for a ragchew

So after you learn the code, how do you learn to use it in a conversation?  

I struggled with copying ragchew QSOs at 20+ words per minute for most the spring and early summer of 2016.  Just listening to QSOs alone wasn't cutting it for me.  During my lunch time at work I began regularly using my CW training application on my phone to send the top 500 words at 25wpm and it has been a big help to me.  

I had to learn the skill of not just recognizing letters but holding what I was hearing in my brain long enough to turn it into a word and just as importantly not to get hung up on a word that I couldn't immediately recognize but let it go and pay attention to the next.  To me, this has been a bigger learning curve than recognizing the alphabet and numbers at speed.

In addition to learning to buffer the letters until they form a word I must also keep the slowly accumulating set of words in my head until it forms a sentence or makes sense as to what is being communicated.  
THIS IS COMMUNICATION with Morse Code and it is different than anything else we are familiar with so treat it as learning a new skill.

Now if all you are trying to do with CW is contests, you don't need this skill.  You just need to be able to copy a call and whatever designators are sent after it for the contest rules (state abbreviation or a contest number or grid square) and get it copied into your logging program.  But if you want to communicate at speeds above 20wpm you will need this new skill.

Next steps

After you've practiced with machine sent top 100 or top 500 words you'll still need time copying actual QSOs because more often than not, most operators you will communicate with have lousy spacing and run their words together or use so many abbreviations that you'll have to learn to hear the abbreviations as new words.  When I work an operator who runs things together I'll first try to really exaggerate my word spacing during my exchange to give them a hint and if that doesn't work I ask them put more space between their words.  Some will comply, but some folks just don't seem to know how to leave space so I'll catch what I can, politely respond to what I could understand and then move on.

So if you're getting discouraged when you reach a wall of comprehension, try the steps above and with time I think you'll find your comprehension during a ragchew improving and it will take you to a new place in the hobby.

That's all for now

So lower your power and raise your expectations... and put extra space between your words!

73
Richard AA4OO

Update 11/7/2016:

KA8BMA pointed me to a nice reference created by W0XI for the top 100 "Ham Words" used in QSOs... check it out most common ham words

TX Factor Episode 13 is Live!

We have an autumn feast of amateur radio content in this ‘13 – lucky for some’ episode of TX Factor!

Bob gets to weigh up the latest offering of digital transceivers with Gary from ML&S.

We chat about the weather with two experts who always look on the bright side. Jim Bacon and Steve Nichols explain how we can work with the prevailing conditions to maximise our chances of good DX.

And Bob realises a boyhood dream by reliving the heady days of offshore radio on the UK’s high seas.

The Show is available to watch now at www.txfactor.co.uk

We hope you enjoy this nostalgic show.

Thirty Minutes of Dazzle: The Sun in UHD 4K by SDO (NASA)

Take a front-seat view of the Sun in this 30-minute ultra-high definition movie in which NASA SDO gives us a stunning look at our nearest star.

This movie provides a 30-minute window to the Sun as seen by NASA’s Solar Dynamics Observatory (SDO), which measures the irradiance of the Sun that produces the ionosphere. SDO also measures the sources of that radiation and how they evolve.

SDO’s Atmospheric Imaging Assembly (AIA) captures a shot of the sun every 12 seconds in 10 different wavelengths. The images shown here are based on a wavelength of 171 angstroms, which is in the extreme ultraviolet range and shows solar material at around 600,000 Kelvin (about 1 million degrees F.) In this wavelength it is easy to see the sun’s 25-day rotation.

The distance between the SDO spacecraft and the sun varies over time. The image is, however, remarkably consistent and stable despite the fact that SDO orbits Earth at 6,876 mph and the Earth orbits the sun at 67,062 miles per hour.

Scientists study these images to better understand the complex electromagnetic system causing the constant movement on the sun, which can ultimately have an effect closer to Earth, too: Flares and another type of solar explosion called coronal mass ejections can sometimes disrupt technology in space. Moreover, studying our closest star is one way of learning about other stars in the galaxy. NASA’s Goddard Space Flight Center in Greenbelt, Maryland. built, operates, and manages the SDO spacecraft for NASA’s Science Mission Directorate in Washington, D.C.

Charged particles are created in our atmosphere by the intense X-rays produced by a solar flare. The solar wind, a continuous stream of plasma (charged particles), leaves the Sun and fills the solar system with charged particles and magnetic field. There are times when the Sun also releases billions of tons of plasma in what are called coronal mass ejections. When these enormous clouds of material or bright flashes of X-rays hit the Earth they change the upper atmosphere. It is changes like these that make space weather interesting.

Sit back and enjoy this half-hour 4k video of our Star!  Then, share.  🙂

73 dit dit

 


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.


Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!


  • Matt W1MST, Managing Editor