AmateurRadio.com

Here we are, two episodes past the Richardocalypse and the calendar hasn’t run out yet! This time around, I’d like to thank Rob from MintCast for once again stepping in to be a co-host on the show, filling in the left big toe of the shoes once worn by The Richard himself.  Since I barely fill a pinky toe, myself, that’s really saying something. In this episode we go a little ham nutty with Linux thrown in. Topics range from slow-scan television to licensing requirements to Rob asking, “What do I need another damned hobby for??” That question and many others answered in this fabulous installment of Linux in the Ham Shack.

73 de Russ, K5TUX

A bonus picture here. The one on the left is a 3 foot in diameter loop.

Note: The little box at the bottom of the small one contains an air variable capacitor for tuning.

Compare it to the 5 foot in diameter loop on the right. ‘

5 Foot Mag Loop

I made a QRP CW contact with this mag loop from right where it stands in my drive way.

Small Loop Feeds the Big One

Home Made Capacitor Clamps.

Home made cap clamps. The clamps are soldered to keep the contact resistance low.

This is very important with High Q antennas.

5 to 150 Pfd capacitor

Russian capacitor. It is available at E-Bay for about $150

Easy to Make PVC Pipe Stand

Where would hams be without PVC pipe!

This stand is made from 2 1/2 inch sewer pipe.

This is  a fun antenna to build and use. I made my first contact with W9GY this afternoon on 20 meters. I used 5 watts, he used 10. RST out was 459, RST in was 579. The antenna was in my drive way in front of the garage that you see here. And Jeff was in Indiana. What a hoot! Making contacts on a home made antenna is great fun. The parts are readily available and with a little planning and shop time you can have a Magnetic Loop antenna to play with.

This is my second Mag Loop. The first one is 3 feet in diameter and covers from 20 through 15 meters. I’m planning another for 17 meters through 10 meters. Mag Loop calculator is available at http://aa5tb.com/index.html

Yahoo has Mag Loop groups that are very helpful to get you started. http://groups.yahoo.com/group/MagLoop/

and http://groups.yahoo.com/group/MagneticLoopAntenna/

Copper foil or strapping is available at http://stormgrounding.electrical-insulators-and-copper-ground-bars.com/copper-foil-2.html

If you’d like more information about Mag Loops, please feel free to contact me. [email protected]

73 De AA1IK

Ernest Gregoire

“What have you done to my play set?”  This gym made a convenient place to string wires, etc.  Two poles in the photo form part of the EWE RX antenna here at K8GU that was hastily erected before the NA Sprint CW.  One of the poles is ty-wrapped to the play set.  Doing my best to keep it klassy and impress the neighbors.

And, we’re up in the air!  The M2 9M2SSB is a little bit out of alignment due to the hex getting tangled in one of the antennas that it was due to replace.  I have already realigned that.  So far, the antenna seems to have useful front-to-back.  Gain is hard to tell since I took down all of the antennas it was to replace.  But, it does seem to work.  I’m suffering from high SWR (above 3) on both 21 and 50 MHz.  G3TXQ warns of interaction between 18 MHz and 50 MHz.  Do not yet know the cause, but I’m looking into it.

Although the antenna is relatively easy to handle, I don’t plan to make a habit of taking it down for work.  Speaking of taking down, the 40m dipole whose center insulator is just visible behind the reflector of the 2-meter beam will be replaced by an as-of-yet-secret antenna.

Construction project:  G3TXQ hex beam built from scratch.  K4KIO directions with K8GU modifications (and reverse-engineered square coaxial center post).  Details to follow once I determine it works to my satisfaction.

One of my favorite events is the Orlando Hamcation. This year I didn’t really have a “get list” so could enjoy more time with fellow QRP ops. Our Central FL QRP Group regular Jim Diggs K4AHO helped us get a QRP Forum and Jim Stafford W4QO came in from Georgia to help bring a good session about working DXCC with QRP. Wow! Jim also did a lot of recruiting of QRP ops as he manned the QRP ARCI booth and allowed us to hang out and assist. We had quite a good turnout of QRP Ops from FL and all over the US and a few overseas members too!

  Carl AA2JZ brought some of his homebrew masterpieces and along with some QRP rigs W4QO displayed we got a lot if interests and questions on what was in the Altoids tins.

After the QRP Forum, Greg N4KGL gave us a demo of his Alex Loop and KX-3 at a nearby picnic table. The weather and bands were both cooperative and we were all impressed with the way the antenna and rig set up and operated!

Thanks to all who joined in the fun. Check out our Central FL QRP Group blog for details on our outings.