AmateurRadio.com

I enjoyed CQ WPX CW despite storm conditions that drove the A-index into double digits. It was a first for my low power, low profile station and I suffered through a deplorable Saturday afternoon. Propagation really matters in the game of RadioSport in addition location, antenna systems, station engineering, operator skill set, and strategy.

There is a lot to learn and accomplish within the art and science of RadioSport.

Friday Night Lights.
I did not settle into the chair until mid-evening after returning home from work then deployed my wire antenna system for the low bands. The south leg of the wire antenna goes up later in the evening after 20m shuts down. I stow the vertical when operating on the low bands in the evening because the wire is too close to the second antenna.

Friday night rocked between 0200 – 0500UTC as 39 -Qs went into the log. I jumped a little early from 20m to 40m and it is a habit of mine. I need to pay attention to the play book knowing 40m is generally noisy at this time of the year.

Storm.
I keep notes on propagation and the receiver floor literally dropped out when the A-index spiked at 28 through Saturday afternoon. I was simply not heard through the noise deciding instead that napping through the day was a better idea. I could not compete against a double digit number.

Sunday Is Different.
I’m noticing a trend that Friday night and all day Sunday really makes a difference in my log. Historically, I have not scored as many -Qs on Saturday however, neither have I experienced a zen-like event when propagation produces epic conditions. It is like surfing, one continues returning to waves time and time again, when all of a sudden the cosmos falls into place.

I know that event is somewhere out there on the time line!

The Bands.
I scored double digits across four bands for the first time ever and called CQ more times than not on the low bands. I did not use memory functions when sending the exchange as well. My biggest surprise was a 10m opening into Oceania and South America late Sunday afternoon. I was thrilled when LU1HF ignited my cans with his stellar signal.

The high bands were fun and 20m produced the best results with 50 -Qs in the log.

I managed a pair of excellent hours on 40m that is 0500UTC (13 -Qs) and 1300UTC (11 -Qs). I was pleasantly surprised on 80m late Sunday morning but my timing on this band was totally off.

Conclusion.
Overall, I logged 116 -Qs and 73 prefixes, totalling 15,549 points effectively beating my score from last year. The storm did not help the low bands where I wanted to log as many JA-stations as possible on Saturday morning. They are excellent operators and the noise was too much for low power, low profile into Asia.

There is more fun work inside the shack relaxation zone and many thanks to all who pulled out my signal through CQ WPX CW weekend!

Contest on.

Atlantic Single Operator.

• N4AF | 50 Qs | 32 Mults | 1,600 Points [PVRC].
• N1LN | 44 Qs | 34 Mults | 1,496 Points [PVRC].
• NO3M | 44 Qs | 32 Mults | 1,408 Points [NCC].

n = 7 scores submitted in this division.

East Central Single Operator.

• N4OGW | 50 Qs | 36 Mults | 1,800 Points [ACG].
• K9BGL | 51 Qs | 34 Mults | 1,734 Points [SMC].
• K8MM | 48 Qs | 34 Mults | 1,632 Points [MRRC].

n = 13 scores submitted in this division.

West Central Single Operator.

• N3BB | 54 Qs | 40 Mults | 2,160 Points [CTDXCC].
• W5JAW | 52 Qs | 39 Mults | 2,028 Points [CTDXCC].
• WD0T (@KD0S) | 54 Qs | 35 Mults | 1,890 Points.

n = 6 scores submitted in this division.

West Single Operator.

• K7SS | 57 Qs | 33 Mults | 1,881 Points [WWDXC].
• W7OM | 44 Qs | 27 Mults | 1,188 Points [WWDXC].
• W7WHY | 41 Qs | 22 Mults | 902 Points [WVDXC].

n = 3 scores submitted in this division.

NCCC in CA/NV Single Operator.

• N6RO | 45 Qs | 29 Mults | 1,305 Points.
• K6VVA | 43 Qs | 30 Mults | 1,290 Points.
• W0YK | 42 Qs | 30 Mults | 1,260 Points [Loma Prieta Contest].

n = 6 scores submitted in this division.

Our 100 foot tower whom looms large in Central Texas continues dominating the fastest 30 minutes in RadioSport. Congratulations, Jim, N3BB for turning in another fine performance and leading the Central Texas DX and Contest Club (CTDXCC) to its fourth banner position!

73 from the shack relaxation zone.

Their vision is bold and their commentary on the state of ham radio is noteworthy. We are, in their words, at a crossroad; one that is deciding the direction of our hobby into the middle of this century and beyond.

Who else but KB1LQC and KB1LQD, young men at the beginning of their careers, could deliver a message to those capable of creating required change?

What kind of ham radio related activities is RITARC involved in these days?
The RIT Amateur Radio Club is one of those clubs I feel is taking a different approach to the hobby. As I stated earlier, there is a difference between the traditional outlook on the hobby and the demands of the current generation of students in high school and college. K2GXT is very much into utilizing amateur radio for various technical aspects, not just operating.

The club has been promoting various uses to advance technology rather than simply operating HF or other bands. As a group we are also very good at promoting amateur radio along with our club to the student body as well as RIT administration. For the last two years straight we’ve won the RIT Clubs Showcase “Best in Show” award which pitches 10 clubs against each other to present themselves to RIT administrators who then vote for their favorite and most innovative club.

We know how to make our presence, effectively get our point across, and deliver a memorable presentation.

For example, we recently redesigned and constructed a 12 foot long RC blimp from scratch which utilizes ATV video on-board. Just search YouTube for some of the videos uploaded this past May! Brent is designing an optical communications system for long distance light transmission. So far he has obtained about 1/4 mile from his efforts. This may not be amateur radio but many techniques learned from the hobby have been utilized.

We just obtained the ability to design, etch, and construct our on PC boards right in our clubroom. Finally, this summer I hope to design a simple Software Defined Radio much like the softrock kit while here at RIT. Both the light receiver and SDR have the potential to become a K2GXT kit for promotional purposes.

We may be veering off from most college clubs but we are seeing a huge amount of interest from the student body. Next year may be a defining moment for the clubs’ membership. Today’s students just don’t seem to be impressed with long distance QSO’s or repeater contacts, at least initially.

Many of my peers might not truly realize that a cell phone is simply a radio. We are becoming quite an abstract society with the technology granted to us. Brent and I have found that by introducing the hobby through alternative methods such as projects and other technological advancements with amateur radio, we are able to grab the interest of younger people.

Tradition will never die, once in the hobby they are exposed to the numerous traditions of DXing, QSL cards, etc. I am excited to see where the RIT Amateur Radio Club is able to go with this next year.

What mode of operation is trending within the club?
RIT keeps most of us busy enough with its academic rigor combined with the quarter system (10 week courses, very fast paced) that we don’t get to operate nearly as much as Brent or I would enjoy seeing. The club did do a lot of operating during this past Fall (2009) and focused mainly on 20 meter SSB and PSK31. Many new club members did a fine job and were interested but unfortunately everyone got hit pretty hard winter quarter with school commitments, it’s a problem many organizations at RIT deal with, the quarter system has obtained a love-hate relationship.

This summer Brent and I are redesigning the clubroom which is located underground in the academic tunnel system to be much more operation friendly. It was setup a few years ago bye people with great intentions but not too much HF operating experience. We hope to make it really inviting to sit down and grab some DX!

What about third year varsity oarsmen for the NCAA Division 3 crew team?
First off, Brent and I no longer row for RIT. Brent obtained a rather bad injury in the beginning of his Varsity year (2nd year) and I had to leave this past year about halfway through my third year rowing due to academics. Rowing is one of those sports that few truly understand. It’s an intense commitment and being proactive, I decided it was better to leave the team than to let my grades suffer; I was going to bed at 4:00am and getting up at 5:30am several nights a week.

Very few people knew that the rowing season goes six days a week and from four to six hours a day from early September through late May. Rowing has been “grandfathered” into the NCAA so it follows the US Rowing regulations as opposed to NCAA regulations; simply meaning that we practice full speed all year.

I have learned a lot about pushing myself both mentally and physically from being on the team as well as how to manage my time. I thought I was busy in high school!

To put it in perspective, I’m not where near the normal height of a rower, most mistook Brent and I for coxswains! Perseverance, mental toughness, and having the ability to deal with a large amount of self-induced lactic acid pain allowed me to row for RIT. Since I am shorter than most rowers I had to push harder just to obtain the same speed as my peers who had more leverage on the oars.

A good analogy for what it’s like to row a 2 Km race would be to put 90 or so pounds on a leg press machine and do 225 leg presses in six or seven minutes without stopping. Crew will be one of those adventures in college that I will miss!

What are your goals after graduation?
Both of us are toying with the idea of Graduate school. Ironically or not, both of us are deeply interested in analog electrical engineering. We both have an interest in further studies involving the analog/mixed signal design field. If not, both of us are obviously RF geeks and want to do something with radio communications.

I have also found an interest in UAV’s (unmanned aerial vehicles) and similar areas so maybe I’ll be able to find a job that blends the two together! Too bad NASA cancelled the constellation program… HIHI.

Where do you see ham radio in the year 2020?
This is a big one. I honestly can’t say for sure but I will say that the hobby is at a crossroads. I feel that many radio amateurs are committed to keeping traditional views of amateur radio the main course of the hobby. This includes things such as DXing, QSL cards, SSB, CW, etc.

Honestly, I don’t see the hobby grabbing the attention of a large majority of the coming generations if it stays on that course. Yes, we have small niches involved in building satellites, software defined radios, and other very technical areas but overall the hobby is very much focused on the same goals it was in the 1950’s and 1960’s.

I’d like to see the hobby as a whole take a step back, look at what the 15-25 year old generation is more responsive to, and go from there.

It is apparent now that mobile communications has been integrated with personal computers which have been further integrated with the Internet. The key word for today’s generations is “integration”, building a 40 meter CW rig may be neat but in the overall picture we have more people who could potentially be involved in amateur radio who are interested in much larger integrations of technology. As radio amateurs we have a critical advantage, spectrum. Use it or loose it as they say.

The engineering field itself is seeing declining interest, why can’t we become the “De-facto” hobby for students interested in engineering? Not just electrical engineers either. Aerospace, mechanical, software, and other engineering disciplines all have the ability to integrate one form or another of amateur radio into their projects. So what if it’s not DXing. Maybe they will become interested in that too!

When amateur radio first started in the early 1900’s think about what it was then. Radio technology was still in its infancy. A brunt of the hobby was involved in experimenting with technology for almost half a century; if you wanted to be on the forefront of communications technology then you got your amateur radio license.

Studying the early years of amateur radio has shown me that around the time-frame following World War II our current traditions were created. Think about it, radio technology allowed for easier communications around the world with surplus equipment. We must move on!

I personally feel we need to look back into our roots of experimenting and try to use the radio spectrum available to us for more technologically advanced applications. This should grab the interest of many high school and college aged people with an interest in technology.

I’ll end this with an analogy. Don’t try to sell a car to someone who isn’t interested in purchasing a car, it’s much more effective to sell a car to someone who is interested in buying one in the first place. Now tell me where amateur radio can improve its promotional campaigns?

73 from shack relaxation zone.

I met Bryce, KB1LQC through Twitter and immediately connected with his CollegeARC project. There are visionaries and leaders, when the attributes of both combine, the result is innovation in addition to a map into our future.

Bryce and Brent, KB1LQD who are twin brothers, are on the adventure of a lifetime while chartering unknown territory toward the middle of our century.

Share with us how you got your start in ham radio?
We both became involved in amateur radio during our Sophomore year of high school in the Fall of 2004. Prior to that Brent and I were constantly tinkering with things and fascinated by mechanical and electrical systems.

Brent obtained a Gordon West study guide for the technician class exam around 2003 however we never got around to using it to obtain our license. My dad who was licensed a year or so after we were with the call sign KB1MGI is a firefighter/EMT. Consequently, throughout our whole lives we have always been around fire/police scanners which instilled an interest in radio communications to some degree.

Then in the summer of 2004 we met our neighbor, W1XH, who gave us a few QST’s and some inspiration. After that my dad bought us the ARRL Technician study guide and a CW key with a practice oscillator. That Fall I had my Technician class license with a CSCE for code credit and Brent had his Technician license (CSCE for code credit came a month later for him). Both of us upgraded to Generals the following December and one year to the day of my call sign being issued, I was awarded an Extra class radio amateur licensed in the Fall of 2005.

So yes, I managed to do all three in exactly one year!

Tell us about your high school amateur radio club experience?
Amateur radio is not our only hobby. In fact, Brent and I are avid mountain cyclist and pretty active members of the New England Mountain Bike Association, NEMBA, when we are home in Massachusetts. Brent and I resurrected the Chelmsford High School Mountain Bike Club during our Sophomore year of high school, just as we were getting into amateur radio. One of the advisers for that club was David Steeves who teaches physics at CHS. Long story short, after riding with him he also became interested in the hobby and he too got his license around 2005 obtaining the call sign KB1MKW.

Starting fresh in the Fall of 2006 Brent and I were working with Dave as our advisor to start the Chelmsford High School Amateur Radio Club (CHSARC). Shortly thereafter the club was awarded the call sign KB1NAY and operated with our own personal equipment for several months. We obtained and won the ARRL “Big Project” grant in 2006 which gave our club several thousand dollars worth of equipment including a Yeasu FT-897, Cushcraft R-6000 vertical antenna, and some other odds and ends to make the station work.

The least I can say is that the ARRL “Big Project” was an amazing opportunity for the club.

Brent and I ran the club until we graduated in 2007 and headed for the Rochester Institute of Technology (RIT). KB1NAY is still operating to this day but with the vanity call sign N1CHS which I helped them obtain in the Fall of 2009. I am proud to say that after visiting the school during breaks from RIT, N1CHS had about 10 members in the 2009-2010 academic year.

One of the most important aspects of starting the high school club was being able to adjust from the traditional outlook on ham radio to a point of view of the hobby from a perspective more in line with today’s high school mentality. We adjusted to catch the interest of the students and it worked. We’ve since taken those ideas to RIT and they also seem to be working quite well.

One of the reasons N1CHS is still going strong, besides being managed by Dave KB1MKW, is that neither Brent nor I lost communications with the club. We attend meetings when we are home and always check in to see if they need something.

Who influenced your zeal for home brewing equipment?
Home brewing equipment was the main interest in obtaining our amateur radio licenses. Both of us would constantly be taking things apart though we had no idea how to put them back together at the time but that didn’t matter. I vividly remember having an old rototiller where the engine had died when I was really young. My parents let me take it apart. My dad literally gave me some tools and I just took the one piston four stroke engine apart. It may not have been electrical but I was absolutely fascinated by seeing the parts move and understanding that all those parts made up a much larger system which propelled the machine.

My first contact in amateur radio was made on a home brewed CW transmitter for 40 meters. It was a design called the “Michigan Mighty Mite” and was simply a Pierce oscillator attached to an antenna. It operated in the Tech-Plus CW band and put out about 500 mW.

I used a borrowed Icom receiver from one of my dads fire/EMT radio friends. I laugh at it today but at the time we didn’t even have coaxial cable. I used a CAT5 LAN cable with all eight wires soldered together as transmission line to the antenna. Oh’ the novel days of being inexperienced! Furthermore, Brent and I always joke that we didn’t obtain access to a VHF rig or any repeaters until after we had our General licenses. We just couldn’t afford it at the time.

What factor(s) propelled your decision to obtain a degree in electrical engineering?
Hands down it was amateur radio for both of us. Without being given the opportunity to build a radio or related electronics and then using it to make a contact I doubt the field of electrical engineering would have caught my attention. Being able to tinker with electronics in the hobby was a defining experience for both Brent and I. We also met numerous engineers in the hobby where we were able to obtain a better understanding of technical fields.

I must joke that neither of us will claim to be good at math, neither of us are one of those students where the guidance counselor in high school suggested to go into engineering! Quite honestly every time we walk into the cooperative education office here at RIT and show them our resume they always ask us why we are not Electrical Engineering Technology majors.

The difference being that both of us have an incredible amount of experience with hands on aspects of electronics. Amateur radio even helped us obtain an internship in the microwave engineering field during high school. We may struggle at the math but no matter how tough it can get, both of us are passionate enough to never give up.

Electrical engineering is what we want to do.

Tell us about your role as Vice President of the Rochester Institute of Technology Amateur Radio Club?
As Vice President of K2GXT I am responsible for odds and ends that they President (Brent) needs to get done as well as serving as the projects manager. Honestly, Brent and I work closely together so the lines between President and Vice President are often blurred between us since we both operate on the same wavelength (pun intended!).

During the 2009-2010 academic year I decided that the club should put a huge effort into the Imagine RIT Innovation and Creativity Festival which was held on May 1st 2010, it was a huge success for K2GXT; we had an incredible amount of interest in amateur radio from a large number of the 32,000 visitors to the event.

Mind you, 32,000 people attended the festival at RIT from just 10AM until 5PM. It is safe to say that we were busy!

73 from the shack relaxation zone.

P.S. Part two will follow sometime tomorrow afternoon.

They are the Rochester Institute of Technology Amateur Radio Club and from small beginnings a future is shaped.

73 from the shack relaxation zone.

P.S. Surfing the ionosphere this weekend and post-storm conditions continue challenging my low-power, low-profile station. It feels like paddling into double overhead while the waves are breaking top-to-bottom.

Finally, the weekend is here, and time to enjoy RadioSport in the shack relaxation zone. It is all about ham radio fun.

Contest on!

The Beach Boys Amateur Radio Club went to work on Saturday morning and rested five hours later after prepping antenna systems. I was tired and a few aches reminded me that taking care of myself is really important. Our team enjoyed its morning and afternoon beneath the solar disc with the blue Pacific over our shoulders. The day was ideal for tackling Field Day logistics and preparation.

We are passionately committed to our project goals such as ham radio fun, operating outdoors, learning, and deploying a competitive signal from our location. The Beach Boys Amateur Radio Club is an informal group letting our enthusiasm for the hobby drive our organizational goals.

Tower.
Our antenna systems arrived to include a 30 foot tower, a tri-bander, a vertical, a VHF quad, and a flat top dipole. The biggest challenge inside the project is the tower. We brainstormed safety principles and focused on the tower base plate. It required 3 foot steel stakes with clips and washers. The team concurred that a stake system in addition to proper guying will maximize our safety.

Our next goal is a practice run at deploying and guying the tower with the tri-bander attached to the rotor mast while keeping safety in mind at all times. Additionally, keeping the rules out in front of us, the entire system is dissembled prior to Field Day operation.

Flat Top Dipole.
Ham radio fun picked up momentum after a pair of operators slung rope into a pair of trees for the flat top dipole. Theoretically, launching rope into tree branches as easy on paper as it seems, is not a straight forward process. It was work and required a few attempts before achieving success. The moment was sweet when we fired up a TS440S on 40m lower sideband and logged a Nevada along with a California station.

The buzz around the work party, “What was the signal report?”

Vertical.
Another team of operators deployed our vertical antenna system for operational testing on the low bands. It’s intentionally positioned at the furthest end of our site to thwart cross band interference. There is nothing more discouraging when stations begin interfering with each other. It is the fast track to frustration.

Counterpoise is everything for a vertical. Pundits may say otherwise, however, I advocate wire beneath one’s vertical. We have the benefit of a large metal-like cage near the feed point surrounding this antenna as an added bonus. The antenna analyzer data suggested reasonable standing wave ratio although I’m learning how-to calculate efficiency.

Additionally, we will deploy a rudiment counterpoise system of quarter wavelength radials or near quarter wavelength given our on-going debate. This system will be above ground but not equal to the height of the feed point.

Conclusion.
The Beach Boys Amateur Radio Club party benefited all those in attendance. We tested two out of three antenna systems, assembled the tower with rotor, improved base plate security, and ended the day exhausted. Everyone enjoyed working outdoors, getting their hands dirty, and learning about antennas in preparation for this year’s Field Day.

73 from the shack relaxation zone.