Author Archive
Halloween UK 2m Licence NOV
Just updated my licence by Notice of Variation to extend the band coverage 146MHz to 147MHz..
It was done in a flash! Or quicker than you can make instant coffee.. You can download a copy of the NOV straight away in PDF format, and there is an email sent back to you with a link to a copy, once you have completed the online application.
*Note Geographic restrictions, and upper band limit apply in some parts of the UK, see link below.
25W Max erp. Digital modes only. Available to Full licencsees only! NOV is for 12 months and expires on 31/10/15
Step down to the RSGB link below, armed with your licence number:
Band plan & details here:
It was done in a flash! Or quicker than you can make instant coffee.. You can download a copy of the NOV straight away in PDF format, and there is an email sent back to you with a link to a copy, once you have completed the online application.
*Note Geographic restrictions, and upper band limit apply in some parts of the UK, see link below.
25W Max erp. Digital modes only. Available to Full licencsees only! NOV is for 12 months and expires on 31/10/15
I don’t understand why we require more digital Bandwidth when there is very little activity on the main 2MHz already allocated?
Step down to the RSGB link below, armed with your licence number:
Band plan & details here:
LNR publish LD-5 manual
If all goes according to plan, they plan a soft launch of initial production run in a couple weeks, with full scale mass production following shortly thereafter.
For now though you can download the manual at the link below:
http://www.lnrprecision.com/ manual/LD5_manual_V1.pdf
For now though you can download the manual at the link below:
http://www.lnrprecision.com/
RIP G4ILO
My latest headline Blog regarding the precision ref board will have to take a back seat..
I have just read on G4ILO's One foot in the Grave Blog, that Julian lost his long battle with his illness yesterday: http://onefootingrave.blogspot.co.uk/
Julian was an inspirational writer, anything new he spotted, purchased, or built, he brought to the forefront of his Amateur radio blog: http://blog.g4ilo.com/ Letting us all know his thoughts and modifications. He tried everything from bargain street kits, Baofeng's to Elecraft, and software writing. He enjoyed his hobby and blogging, which was always written to a very high professional standard.
I am going to miss his regular updates on his blog, because I really enjoyed reading what he had written, and couldn't wait for the next item he was going to write about.
My thoughts and condolances must go to his wife Olga and family.
RIP Juilan Moss G4ILO
I have just read on G4ILO's One foot in the Grave Blog, that Julian lost his long battle with his illness yesterday: http://onefootingrave.blogspot.co.uk/
Julian was an inspirational writer, anything new he spotted, purchased, or built, he brought to the forefront of his Amateur radio blog: http://blog.g4ilo.com/ Letting us all know his thoughts and modifications. He tried everything from bargain street kits, Baofeng's to Elecraft, and software writing. He enjoyed his hobby and blogging, which was always written to a very high professional standard.
I am going to miss his regular updates on his blog, because I really enjoyed reading what he had written, and couldn't wait for the next item he was going to write about.
My thoughts and condolances must go to his wife Olga and family.
RIP Juilan Moss G4ILO
Calibration time
If your in the right place at the right time a useful bargain can be found..
I had been looking at a way of checking calibration of my DMMs on DC, and this useful board will do that for £4. Using an AD584K Precision reference chip, that will output 4 high stab Volts by the flick of a switch:
10.0 V +/- 10 mV
7.5V +/- 8 mV
5.0V +/- 6 mV
2.5V +/- 3.5mV
Figures quoted are for 15V feeding the input of the board
I have seen these on the Internet at various sources, but my link proved to be the cheapest I could find: http://www.banggood.com/AD548-High-Precision-Voltage-Reference-Module-4-Channel-Calibration-p-932160.html
There is also a full spec sheet on the device at the above link.
I will come back to this when I have boxed it up and terminated it for better protection..
I had been looking at a way of checking calibration of my DMMs on DC, and this useful board will do that for £4. Using an AD584K Precision reference chip, that will output 4 high stab Volts by the flick of a switch:
10.0 V +/- 10 mV
7.5V +/- 8 mV
5.0V +/- 6 mV
2.5V +/- 3.5mV
Figures quoted are for 15V feeding the input of the board
I have seen these on the Internet at various sources, but my link proved to be the cheapest I could find: http://www.banggood.com/AD548-High-Precision-Voltage-Reference-Module-4-Channel-Calibration-p-932160.html
There is also a full spec sheet on the device at the above link.
I will come back to this when I have boxed it up and terminated it for better protection..
Which is your favourite Baofeng (Pofung)?
We all call them Baofeng the original name, but now they are called Pofung. Who really cares about the name? They are a budget priced HT capable of 2m/70cm and other freqs, they have lots going for them.
Take the survey to the right of the Blog and lets see which one of the 5 you like.
We have the pocket sized UV-3R which includes all models MK1/2. and Plus..
The full sized UV-5R, again includes all models RA, RC, RE etc.
UV-B5 and UV-B6
The rugged UV-82
The budget priced BF-888s 16 CH UHF model.
UV-3R UV-5R UV-5B/B6 UV82 BF-888s
I will let the survey run for a month, perhaps in the comments you will let us know what you like and don't like about them?
Of course if you don't own a Baofeng yet, take a trip down to Hans PD0AC Blog, and do a search for a model which takes your fancy, he has written full reports on most of them:
http://hamgear.wordpress.com/
I know which one is my favourite which is yours?
Take the survey to the right of the Blog and lets see which one of the 5 you like.
We have the pocket sized UV-3R which includes all models MK1/2. and Plus..
The full sized UV-5R, again includes all models RA, RC, RE etc.
UV-B5 and UV-B6
The rugged UV-82
The budget priced BF-888s 16 CH UHF model.
UV-3R UV-5R UV-5B/B6 UV82 BF-888s
I will let the survey run for a month, perhaps in the comments you will let us know what you like and don't like about them?
Of course if you don't own a Baofeng yet, take a trip down to Hans PD0AC Blog, and do a search for a model which takes your fancy, he has written full reports on most of them:
http://hamgear.wordpress.com/
I know which one is my favourite which is yours?
The hits keep on coming!
You do wonder when you start publishing your finds, and thoughts, via a blog if folk will read them?
Well a look at the stats reveal they do:
Well a look at the stats reveal they do:
| |||||||||||||||||||||
| Thanks for reading I will write some more soon. | |||||||||||||||||||||
PSDR from Michael Colton
A new open source Portable HF SDR Transceiver is evolving from Mike Colton (KE7HIA), a self taught designer. Named the PSDR. It is full coverage (up to 30MHz) Transceiver, plus 144MHz. Using an ARM 168MHz processor, colour display, and an innovative interface.
For full details check out Mike's project here: http://hackaday.io/project/1538-PortableSDR
For full details check out Mike's project here: http://hackaday.io/project/1538-PortableSDR













