Kenwood filter fault fix

As the owner of a Kenwood TM-D710 I was interested to see that Anastasios, SV8YM, has developed a mod to fix the problem of the failing IF filters which causes these radios to go deaf after a couple of years. As explained in admirable detail in his original article describing the problem, it is caused by electromigration due to the fact that Kenwood omitted DC blocking capacitors on the input and output of the ceramic filters. This issue affects the TS2000 as well.

As you can see from Anastasios’ excellent photographs, the mod involves cutting some tiny circuit board tracks, bridging between pairs of them with wire, then soldering 0.1uF SMD capacitors between the bridge and the filter input. The TM-D710 has two receivers, each with two filters (one for wide FM and one for narrow FM) each of which has both an input and an output that needs to be treated. So that is 16 tracks that need to be cut and 8 tiny capacitors inserted. I’m afraid working with these tiny components is beyond me, which is a shame as it is now, while my Kenwood is still only a few months old, that it needs to be treated.

Thanks to SV8YM for sharing the details of the modification.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

Leave a Comment

Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter
News, Opinion, Giveaways & More!

E-mail 
Join over 7,000 subscribers!
We never share your e-mail address.



Also available via RSS feed, Twitter, and Facebook.


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.



Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!

Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: