Posts Tagged ‘tyt’

Review – BTech DMR-6X2

by John ‘Miklor’  K3NXU

Several Dual Band DMR handhelds have been introduced into the market in the past few months. Having owned most of them, I would have to place this one toward the very top of the list. The DMR-6X2 is both VHF and UHF, Tier II  DMR digital as well as FM analog with most features geared strictly toward ham radio use.

Important Note:  The BTech DMR-6X2 is Not made by Baofeng. (see note below).  That being said, let’s see what’s…

In the Box
Included with the radio are the:
–  Two (2)  Li-Ion Batteries   (2100 and 3100 mAh)
–  Two (2)  Belt clips
–  Hand Strap
–  37 page User Guide – English
–  Charger base & AC adapter
–  Antenna – 6.25″ (16cm)
–  Programming Cable
–  Earphone / Microphone

General Description
–   DMR / FM
–   VHF / UHF Dual Band
–   Size:  5.1 x 2.4 x 1.5″   (129 x 61 x 39mm)
–   Weight:    9.9oz   (282g)  w/ant & 2100 mAh battery
–   Weight:   10.8oz  (306g)  w/ant & 3100 mAh battery
–   136-174   400-480 MHz
–   CTCSS/DCS  DTMF/2TONE/5TONE
–   Digital Simplex Repeater
–   <1.0w / 6.0w transmit
–   4000 channel
–   250 Zones (up to 250 channels per zone)
–   10,000 contacts
–   150,000 DMR Database Contacts
–   Part 90 compliant – 2AGND-DMR6X2
–   N0GSG Contact Manager Compatible

Basic Description  (additional features)
The heart of the 6X2 is the proven Anytone D868. Under contract with Anytone, BTech had several addition features exclusively added to the 6X2.

Some of the additional features exclusive to the 6X2 include:
–  Multiple Scan Groups
–  Priority Scan
–  Change TG via Keypad (Adhoc) with Unlimited Hold Timer
–  Display Color Options
–  Digital Simplex Repeater
–  Analog Squelch Level Adjustment
–  Start Up Code Plug Compatibility
–  Display Hold

– Multiple Scan Groups in Same Channel
The 6X2 allows multiple scan lists to be entered  per channel. You are no longer limited to one scan group entry per channel. The scan groups can include and mix of DMR or analog channels.

– Priority Scan
When developing a scan list, up to 2 channels can be assigned as priority. This allows the priority channels to be interwoven in the scan list. As an example:
–  Channel 1
–  Priority Channel 1
–  Channel 2
–  Priority Channel 1
–  Channel 3
–  Priority Channel 1

– Change Group via Keypad (“Unlimited” hold timer)
This is specially nice when using a hot spot. By setting a key function to “Dial” or “Long Press 0”, and the Group Call Hold time to “Unlimited”, you can enter a Talk Group using the number pad and it will remain permanently or until the channel is changed. No longer is the hold time set in seconds or minutes.

– Display Color Options
There are two display color options available. They are White on Black background, and Black on a Powder Blue background. (shown below). They are selectable by either software or keypad menu.

– Analog Squelch Level Adjust
The analog squelch level can now be adjusted using one of the programmable keys.

– Start up Code Plug
To assist with start up, the software was written to initially accept an Anytone D868 code plug.  I’ve had a 868 since they first came out, and this was a huge time saver. Everything transferred and I was ready to play radio in minutes.
Note: Due to the extra features in the code plug, a 6X2 CP cannot be transferred back to a D868.

– Digital Simplex Repeater
Not to be confused with a standard repeater, this feature allows the DMR-6X2 to function as a Store and Forward Simplex Repeater. The 6X2 records a transmission and stores it in memory. Immediately after the incoming signal is dropped, the transmitter keys and re-transmits the recorded audio. The re-transmission can be either on the same or different frequency (not necessarily on the same band).

This feature allows the 6X2 to be used as a relay point during events such as marathons, races, etc. where a central relay method is needed and there is no local repeater.

– Display Hold
When a signal is received, the data image (name, call, location, etc) remains on the screen until the next signal is received rather than drop back to a standby screen. There is a Call End indicator at the bottom, but the data remains.

The Technical Side of the 6X2


The
Transmitter

The frequency range of the DMR-6X2 is both VHF 136-174 and UHF 400-480 MHz. Along with DMR, the radio also supports analog FM (Wideband and Narrowband)

The power levels hold pretty close to the specifications. There are four power levels with a high of 5.0W and a Turbo mode of 6.5W. I personally run mine in 5W mode. Turbo isn’t going to Make or Break the signal, but it helps the battery.

What I do like is the low power mode is less than 1W. I run a hotspot here and if the power was only 0.3W I would be happy.

My audio reports have been excellent both through a DMR hotspot and the local repeaters. There is a five level microphone gain parameter that allows you to select the microphone gain level that best suited for your voice. I use level 3 (mid-level) for a full smooth audio response. I tried level 5 and found the audio was way too hot.

Power levels are listed below and were taken using a calibrated Bird Termaline wattmeter.

Enclosure
The DMR-6X2 case has a good solid feel and weight, and fits the hand well.  It weighs in at  9.9oz   (282g) with the standard battery attached and 10.8oz (306g) with the high capacity battery. Battery removal requires a simple push of the release slide located at the top of the battery. No battery sliding or pushing is required.

I found the keypad buttons a bit larger than most with a lighted keypad layout of three across and four down. This puts the zero (0) at the bottom of the keypad where I believe it belongs. The PTT button requires only a light pressure that doesn’t tire the finger to press.


Antenna
The included dual band antenna is 6.25″ which is a fairly common size for a handheld. I found that there was a slight improvement of about 2db by using an NA-771.  The 771 is 10″ longer, so a difference would be expected, but I’ll probably stay with the stock antenna.



Receiver and Audio
The receiver sensitivity is very good on both digital and analog. I found the receive audio is amazing with wide and smooth frequency range.

The volume control range is adjustable with the software. Level 1 sets the full range of the volume control to a soft level, even at full volume. Level 8 sets the volume range to very loud at the top end. My preference is level 3 to 5 which is plenty loud, even for mobile operation.

Display
The radio has a two multi-color display options. The high contrast White on Black, and the softer is a Powder Blue with multi-color icons. The color is selectable via software or as a keypad menu option. The screen size is 1.1″ x 1.4″ with excellent resolution .

There are multiple sites where the current DMR User Database can be downloaded. There are various formats available allowing you to view name, call, location, user ID, license class, etc.

.
Software
Along with entering data in the conventional manner, the software allows you to import and export data to ‘csv’ files. Loading in a contact (TG) list, channel list, database, etc. is relatively simple.

I found being able to export to a ‘csv’ file has several advantages. I like having my channel list in sequence. With most software, you can only add new channels to the bottom of the list. Now I can sequence the list so it’s easy to view then load it back into the code plug.

Adding a new repeater can be done in minutes. I just cut and paste a copy of an existing repeater, change the frequencies, and load it back.

Note: The BTECH 6X2 can import a code plug (.rdt) from an Anytone D868UV directly. This is a great way to get your 6X2 on the air. Once loaded, however, due to the expanded parameters, the D868 is not capable of reading a 6X2 code plug.


CSV transfer Caution
Adding large amounts of data, updating and re-sequencing via CSV files is a major plus, but should always be done with Caution. For instance, Talk Group data must always be loaded before or at the same time as the Channel data. If not, improper data attachment may not occur.

Always backup your current code plug before modification.

Firmware
As additional features and future enhancements are developed, the radio can be updated to latest model. A firmware upgrades can be done with a Windows computer in about 5 minutes.

Note: The DMR-6X2 firmware is specific to this radio. It cannot be uploaded to a different model in hopes of adding new features.

Programming Cable
The DMR-6X2 comes with the necessary programming cable. The UART chip inside the radio, so the cable itself is straight through. There is no circuitry inside the cable itself. The driver will load automatically when the cable is attached.

For reference, although the cable appears to be the same as some that have the chip in the cable, those cables are not compatible.

 

The charger base requires a standard 12vdc wall wart (included). The LED on the front of the charger base is Red when charging, and Green when either fully charged or no radio in the cradle. The battery easily charges to full capacity with an overnight charge.

Battery and Charger
There are two batteries included with the 6X2, a 2100mAh and a high capacity 3100mAh. With battery save on, I can get 2 to 3 days out of the 3100mAh battery before needing a charge.

There are also USB charging cables available with output of 12V. These can also be used in place of the included Wall Wart.

Conclusion
If you think the BTECH DMR-6X2 very closely resembles a D868UV, you are correct, but as shown above, it is definitely not simply a rebadged Anytone. There are features and enhancements that set these two radios apart. I think BTECH was wise to wait for the bugs to be ironed out before introducing the 6X2 to the market.

If you’re waiting for this radio to drop in price, don’t hold your breath. Its features and performance make it well worth the price.

The obvious pros are the following:

–  True Tier II DMR
–  Same Band and Cross Band digital simplex repeater
–  Dual Band VHF/UHF operation
–  Multiple Scan Groups per Channel
–  Priority Scan
–  On the Fly Talk Group Entry
–  Built-in Voice Recorder
–  2TONE and  5TONE decoding
–  150K user database capacity
–  FCC Part 90 certified for commercial use
–  N0GSG Contact Manager Compatible

There are plenty of options geared more for hams than commercial use. It performs well and makes a nice addition to the ham shack.

Available from:    and    Amazon


For Clarification
BTech (BaofengTech) is not a division of Baofeng. They are an ODM that partners with OEM manufacturers to spec and build to their own requirements, whether from scratch (UV-5X3) or from an existing product. This 6X2 is an Anytone at heart with additional unique features found only in that model.

 

 

 

Here’s a comparison chart showing the major differences.
Click to enlarge.

Review – BTech AMP-25 series for Analog & DMR

by John ‘Miklor’
K3NXU

The  AMP-25  series  VHF / UHF Amplifiers

The recently announced BTech Digital and Analog amplifier series puts a whole new spin on mobile operation. It performs more like a mobile than it does a power amp. The D series are true TDMA Tier2 DMR amplifiers.

Note: This review was done using an Anytone D868UV on both DMR and analog.

In the Box

Included with the 40W Mobile Amp are:

–  Mounting Bracket
–  3′  Interface Control Cable (Kenwood K1 connectors)
–  3′  RF connect cable (SMA-M to SMA-F)
–  Microphone and Hanger
–  All necessary mounting hardware
–  User Guide

General Description
–  UHF or VHF Power Amplifier

–  2-6W  >  20-40W  Output

                         Modes of operation include:

             V25  U25            V25D   U25D
Analog (FM)
C4FM (Fusion)
P25  (Phase 1)
NXDN
IDAS
dPMR
MPT1327
 >  DMR Tier II (TDMA)
 >  P25  (Phase 2)
Analog (FM)
C4FM (Fusion)
P25  (Phase 1)
NXDN
IDAS
dPMR
MPT1327

A Different type of Mobile Amplifier

I found these to be much more than a typical power amplifier. Although they can function as a simple ‘In and Out’ power amp, this is about as close to a full mobile as you can get. Although the driving force was my DMR handheld sitting in my cup holder, the transmit audio was that of the included hand microphone and the receiver audio out was coming through the built in speaker driven by a four watt audio amplifier.

Transmit Power

I tested the power on two different models. The VHF V25 (non TDMA) and the U25D for UHF DMR.  The power was tested using the analog side of both into a calibrated Bird Termaline wattmeter. The maximum current drain from my 13.6V 30A power supply was just under 6A. This is low enough for the amp to be powered by the 10A accessory jack in your vehicle.

Enclosure

The basic frame measures 4.6″W x 1.3″H x 5.5″D (excluding the SO-239) and weighs in at 26oz.  I was curious to see the internal layout of the amp and to no surprise, there was a 5/8″ finned heat sink spanning the entire length and width of the case along with air vent along the back of the enclosure.

Operating Modes

These are single band amplifiers.
V25(D) = VHF 136-174MHz
U25(D) = UHF 400-480MHz.

Note: The V25D and U25D were designed to include DMR Tier II (TDMA) and P25 Phase 2 along with all other modes. Their operation varies slightly.

V25  /  U25
To operate VHF through the UHF (U25) amplifier, or UHF through the VHF (V25) amplifier, simply power off the amplifier. This will allow you to run straight through directly to the antenna without power amplification on that band.

V25D / U25D
These amplifiers will only operate within their specified VHF or UHF range. This is due to the circuit switching design of DMR Tier II and P25 Phase 2.

Hook Up

The simplest configuration is using the included RF cable to attach the radio to the amp. You could add a Spkr/Micr to the handheld, but you would still be bypassing some of the best features.

I use the two included cables. The 3′ RF cable to attach the radio to the amp, and the control cable. This allows me to use the full size hand microphone as well as connecting the four watt audio amp powering the speaker. The power included power cable is compatible with handhelds using the standard two pin Kenwood style connector, such as an MD380, D868, GD77, UV5R, F8HP, UV82, etc.

I use an Anytone D868 on DMR as well as analog with the hookup diagrammed below. Depending on your radios antenna jack, you may need to pickup an SMA-M to SMA-M adapter.

 

Convenience

All channel selection and volume adjustments are done using the handheld. No duplicate programming or code plugs are necessary. Whatever is in my handheld is what I operate in the mobile

Operating my handheld in the low power position, I still get 22W out on UHF and my handheld’s battery life remains excellent, but high power gives me a solid 39W.

Conclusion

I was glad to see someone finally develop what is a full featured mobile amplifier capable of  DMR as well as all other modes including C4FM and D-Star that is small enough to mount in the car, boat, and on top of your computer. This amplifier is Part 90 certified and definitely worth considering.

Available from Amazon:    V25     V25D     U25     U25D
and     

VHF /UHF
Digital / Analog
Mobile Power Amplifiers

 


Subscribe FREE to AmateurRadio.com's
Amateur Radio Newsletter

 
We never share your e-mail address.


Do you like to write?
Interesting project to share?
Helpful tips and ideas for other hams?

Submit an article and we will review it for publication on AmateurRadio.com!

Have a ham radio product or service?
Consider advertising on our site.

Are you a reporter covering ham radio?
Find ham radio experts for your story.

How to Set Up a Ham Radio Blog
Get started in less than 15 minutes!


  • Matt W1MST, Managing Editor




Sign up for our free
Amateur Radio Newsletter

Enter your e-mail address: