Posts Tagged ‘icf-2010’
An old friend returns, and arrives with a mystery item
I’ve owned many of the classic shortwave receivers throughout the roughly 40 years that I have been a SWL. Most of these I passed on to friends and relatives, while others were sold at hamfests, and on eBay. I know that my beloved Panasonic RF-2200, is still used by my sister-in-law Alice. My late brother Paul kept it prominently displayed on the counter for years. My Sony ICF-6500 lives in Wisconsin, in the hands of a good friend that wanted to get in to shortwave listening. Others, I’m not so sure as to the whereabouts, but hopefully they are still in use (with exception given to my National HRO-60 which I know was lost in a flood).
Of all of these, the one I frequently regret selling was my Sony ICF-2010. The 2010 is still considered to be one of the best portable shortwave receivers around, and rivals many tabletops. I sold mine on eBay during what we’ll call a dark time in my life a number of years back. I purchased the 2010 new at Gilfer Shortwave in NJ, in-person. Now, as I see working examples sell for upwards of $350 on eBay, I have relegated the replacement of this radio to a status of someday, along with several other things that I want but do not need at the moment. It would be a nice addition to my collection though, considering it is a great receiver. It has a synchronous detector, separate USB/LSB modes, and 100Hz resolution, and portability.
Last week while watching new postings on eBay I saw one come up. This example was listed as for parts or not working. Upon reading the description, I noticed that the seller indicated the radio to be completely dead. Now, in the world of radio repair, completely dead is usually better than many other states of being. Especially in the case of the 2010, which is known to have battery compartment issues. Anyway, I grabbed the radio immediately for a VERY reasonable price. It arrived last night, and as I suspected, the problem was battery compartment related. The 2010 runs on 3 D-cells, and 2 AA-cells. The AA cells are listed as the computer batteries. One thing about the 2010: If you want to run it on AC power alone, you still HAVE TO have the AA-cells in place. One of the plastic supports for the AA battery contacts had broken from the housing. It is still held in place with a ribbon-
sized piece of plastic though, causing it to tilt at an angle back and forth like a loose tooth. I temporarily fixed it with a piece of compressed foam and some plastic tubing. The radio works great! Better I think than my early example from years ago. I have a couple of questions for the radio community though.First of all, what should I glue the AA-cell support back in place with? I would try crazy-glue (or any generic cyanoacrylate), but I know that it will sometimes react with some commercial plastics, making the problem even worse. I was thinking of using Gorilla Glue, but I would need to devise a clamping method. I know some of you out there have dealt with such things before. What do you use?
Second, the radio arrived with a loop antenna of some kind. I have put pictures below. It is approximately 21 inches long, made from PVC pipe with two endcaps. On one end is an F connector and on the other end, an eye-hook. I scrounged in my adapters and was able to hook it up. It definitely improved reception on a few bands. Has anyone seen one of these before? Is it a commercial product, or homebrew? What is the bandwidth? And, if no one knows, what is the best method for determining its properties? Feel free to answer in the comments.