AmateurRadio.com

AmateurLogic.TV Episode 71 is now available for download.

It’s ALTV’s 9th Anniversary. We give away the IC-7100 complete mobile outfit.
Tommy talks about Dynamic DNS and when to use it.
Peter prepares for his balloon flight.
George presents his CheapoDuino scaled down Arduino Uno clone.
Plus what we’ve been up to…

1:05:47

Download
YouTube

George Thomas, W5JDX, is co-host of AmateurLogic.TV, an original amateur radio video program hosted by George Thomas (W5JDX), Tommy Martin (N5ZNO), Peter Berrett (VK3PB), and Emile Diodene (KE5QKR). Contact him at [email protected].

This week, from October 13th to the 19th, the North American QRP CW Club (NAQCC) is celebrating the 10th Anniversary of its founding.  There will be N#A stations on the air - N1A, N2A, N3A - all the way through N0A.


Yours truly will be on the air as N2A as follows:


October 16th - from 0000 to 0200 UTC on 7.040 MHz  (Wednesday evening EDT)
October 17th - from 0000 to 0200 UTC on 7.040 MHz  (Thursday evening EDT)
October 18th - from 0000 to 0300 UTC on 3.560 MHz  (Friday evening EDT)

Coincidentally, I will be taking a vacation day from work this Friday, October 17th - so after some chores, I will probably get on during the day to try and work some of the higher bands.

As you can see from the table, I was on 20 Meters last night. It was dead - deader than a door nail! So towards the end of my shift, I checked with the Reverse Beacon Network to make sure that there were no N2A stations on 80 Meters and I shifted over there. It was better. Not much, but I did manage to make a few QSOs.

For all the information about the NAQCC's Anniversary celebration, you can go to http://www.naqcc.info/main_n3a.html.  All the QSL information is there. To see a list of activity that's already been planned, go to http://www.naqcc.info/spot_schedule.php.  Keep in mind, this is activity that has been pre-scheduled to this point. More will be added as operator's personal time permits. I know that I probably won't be able to add my additional Friday or Saturday daytime operating time until relatively close to when it's actually going to happen. In addition, I'm not sure that I will operate from home or perhaps the local park. So check the schedule often as it will most likely be amended - a lot!

As I mentioned before, another good tool to check for NAQCC Anniversary activity is to simply go over to the Reverse Beacon Network and simply plug in the N#A call for any, or perhaps the particular district your interested in QSOing with. For example, just enter N2A where it says "search spot by callsign" under the map. That will tell you where WA2NYY, WK2T, K2YGM or myself happen to be at any particular moment.

Oh, and if you try to work me as N2A, please be patient! I am trying to make these QSOs just a tad more than "TNX UR 599, 73 DE N2A". Not ragchews, per se, but definitely more than get-it-done-with-quick. 

UPDATE: Thanks to the following, who kept me company during lunch and got in a QSO with N2A (me) in the process - Steve AB0XE, Andy KD4UKW, Anthony KK4VAU,  Van N4ERM - all on 20 Meters - 14.060 MHz. Oh, and Van ..... not sure what you were using as far as rigs go, but your signal almost made my earbuds pop out - 599 +++!  Great signal from North Carolina!

72 de Larry W2LJ
QRP - When you care to send the very least!
Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

What could be the QRP rig of the year, many of us are still awaiting for the release of the LNR-5 from the makers of the Par EndFedz antenna.



 

Since I passed on the news of this radio to G3XBM's blog umpteen weeks ago when I first spotted it on the LNR precision Facebook pages, the only thing I can report at the moment is the LNR website has been upgraded with general information, plus a short form spec, and highlighted Ordering Information Soon. 




http://www.lnrprecision.com/transceivers/ld-5/



https://www.facebook.com/pages/LnR-Precision-Inc/229134337165152?sk=timeline&ref=page_internal


With Christmas on the way we eagerly await an announcement of price, I guess they are just doing the final tuning before release?
Steve, G1KQH, is a regular contributor to AmateurRadio.com and writes from England. Contact him at [email protected].

At the conclusion of tonight's SPARC Technician License course, we will have reached the halfway point.  Four sessions down with four to go and then the exams on the night of November 18th.  There is soooo much to cover and so many questions to answer.  Each session is supposed to end at 9:00 PM but except for one, they have all gone over.

In between classes, our students are supposedly doing their reading and we advised them to really begin with the online tests, if they haven't already.  They know enough by now, that they should be able to at least get a 50%. I have also been e-mailing video links to them, giving them You Tube videos to watch that hopefully might augment the material we covered in class the previous week.

All this makes me wonder how useful are those HamCram classes that you read about.  I've been a VE at a couple and they seem successful enough.  I am told that the way it is supposed to work is that the students study the license manual and do all the reading on their own for 8 weeks prior to the cram session. Then the all day (or two day) cram session winds up being a "super review" session where the material is gone over, reinforced, and any questions or unclear concepts are made crystal.

I'm not sure that would have worked for me back in the day when I became a Novice. I liked the fact that there was a licensed Ham that I could go to each week to have as a resource to answer the questions I had  - and there were plenty. Plus the fact we had to learn Morse, we needed that weekly encouragement with that, also.

Even though our students are sharp, they still have questions. We clear them up the best we can, so they can move on to the next batch of material without unsettled concepts lurking around in the back of their minds. I'd hate to think of how I'd spend a day (or two) answering 8 weeks worth of unanswered questions!

I suppose if you're a real disciplined, self-starter type that doesn't need the occasional nudge, then a HamCram might work well for you.  I am happy with our format, though. I like the idea of getting to know our students over the 8 week period and helping them feel like they're being welcomed into the Amateur Radio community.  I am hoping that these students will become way more than that, that they will become my friends who I will get to know even better, and share laughs and Amateur Radio adventures with in the years to come.

72 de Larry W2LJ
QRP - When you care to send the very least!
Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

Courtesy: http://www.picgifs.com

With the return of cooler weather and a few overnight rainy periods, the brown summer-lawn has suddenly turned green and is growing far too fast once again. I find this time of the year, as well as early spring, the best time to plant any new radials that I like to continuously add to my vertical antenna systems. My large inverted 'L' for 2200/630m as well as my half-slopers for 160, 80 and 40m, all have a common base, which lets all of the antennas benefit from the radials laying just beneath the lawn.


The procedure I follow is fairly easy but does take time and I usually just add four or five each year. Although I haven't kept an accurate count, I know the system now has fifty or more radials varying from 30' to 70',  fanning out in various directions from the base of my main tower.


The terminated end of the radial is first pinned-down using a U nail or a longer 3 1/2" galvanized finishing nail that has been bent over in the vise, with the height of the grass determining which one I use. Shorter grass lets you get away with the smaller U nails, which can be found in most building supply stores.


Once pinned, the grass is parted using a stick, knife or awl, to produce a shallow gap for the radial to sit in. I try and do a 3-foot section at a time before placing the wire into the opened-up area. Another way that is effective, especially if the grass is short and the soil dry, is to run the blade of a knife through the grass to actually slice a shallow slit which the wire can be pushed into. This allows the wire to be almost completely buried immediately. Both methods require pinning, with the nails, every few feet.

Once pinned in place, the grass can be quickly ruffled back into place, covering the radial. When done in the fall or in the spring, the grass will very quickly completely overgrow and incorporate the radial into the lawn, never to be seen again.


An interesting product that I have recently learned of may also be of interest - "Ground Staple Pins" by RossRadio. Details may be viewed at their website.

Courtesy: http://www.rossradio.net

It really is very little work for the immediate payback realized by lowering system ground losses and increasing your antenna efficiency and overall ERP, especially on LF.

With the winter DX season just around the corner and the pleasant fall weather, it couldn't be a better time to plant a new crop of radials in the backyard!


Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

Ten-Tec Factory Relocation Update

Internet access is working, working on phones, carts, shelves, desks, etc. We are far from having enough set up to do any real work at the new location yet, but, the move is occurring, boxes are getting moved, and unpacked. Phones will transition from one service provider to another so that will be a mess for a short spell when the porting occurs, but by end of October, we “should” be business as usual, no, not “as usual”, better. We are still making rigs and will continue to do throughout the move, so, Eagles will still leave the nest throughout the rest of this month, so will Argonaut VIs and so will OMNI-VIIs.

Thanks, and 73,
John Henry, KI4JPL
TEN-TEC Engineering, a Division of RFConcepts LLC

It appears that the special transceiver pricing continues to hold. That Eagle package at $1499 is an amazing price.

Filed under: Ham Radio Tagged: tentec

Jeff Davis, KE9V, is a regular contributor to AmateurRadio.com and writes from Indiana, USA.

As an experiment this afternoon and evening I am using the (short baseline) earth-electrode antenna. I am being copied by G0LRD (25km) and G3ZJO (79km) so far. It is now 1620z. Initial results suggest G0LRD is getting me very slightly better on the earth electrodes, whereas G3ZJO is getting me slightly weaker. This is comparing the earth-electrode “antenna” with the HF /VHF antennas with strapped feeders tuned against mains earth. In the latter case I resonate the antenna with a 110mm diameter coil with many taps.

One end of the earth-electrode is tied to mains earth. The “far” earth is a 1m long earth rod driven into the soil. The connection to the far electrode is 32 x 0.16mm PVC covered wire running along the fence at a height of about 2m. This wire dog-legs and is about 15m long. The spacing between the “far” electrode and mains ground in the shack is about 12m max. At the old QTH the baseline was more like 20m.

I think the earth-electrode antenna acts a bit like a loop so best results tend to be in the line of the loop. It also means there is not a huge difference between the two systems. You could say they are both equally bad, but the earth-electrode system needs no matching coil. I have optimised the resistive match using a 3C90 toroid (step up) between the transverter and earth-electrode antenna. At the old QTH it looked close to 50 ohms so the toroid was not needed.

When fitter, I’d like to try an earth-electrode system with a much bigger baseline.

There is no doubt that my 472kHz antennas can be much improved. The question is, “how seriously do I want to try?”

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.