AmateurRadio.com

I don’t think this company still exists.

At one time you could buy Mizuho single band SSB handhelds for many bands up to 2m including many HF bands.  I owned the 2m 200mW pep version (MX2) and managed to work some decent SSB DX with mine mostly with a 1/2wave whip on the rig. The main issue was the poor battery life, so I tended to use an external 9.6V battery.

My rig was used in the main with a homebrew 2m-10m transverter and I worked all over the world on 10m with just the tiny Mizuho rig on the desk.

If I remember right I covered the CW and main SSB parts of 10m by having a couple of crystals in the transverter. Somewhere I still have the transverter, although it has not been used for years.

See https://sites.google.com/site/g3xbmqrp3/vuhf/mx2 .

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.

The other evening I had an opportunity to get on the air it has just been to long and I was very excited about spinning the dial around the HF band! I ran the coax out to my MFJ 1788 on the balcony and fired up the K3. I jumped on 20m were not to much was happening but on 30m there was some Dutch DX that was calling CQ so I thought I would give them a go. Prior to calling my SWR on the loop antenna was tuned to 1.2:1 BUT when I started to call the Dutch station my SWR readout on the K3 magically became 99.9:1!!! It was like the coax had been removed from the antenna and was sitting on the ground. It was late so I wanted to look into this at a later time, this evening was the later time so I hooked the antenna up and gave 20m a go and the SWR once again on the K3 was showing 99.9:1. It was time to trouble shoot, was it the coax, MFJ 1788 antenna, the K3 or my LDG antenna switch? The first thing I wanted to do was to remove the antenna as the problem.

Without LDG antenna switch

I removed the coax from the antenna and in it's place put a 50 ohm dummy load. In a way I was relieved to see the 99.9:1 SWR thus removing the MFJ 1788 from the problem. Next I bypassed the LDG antenna switch and low and behold the SWR now was 1.1:1 and me saying thank god it was not my K3! So it would seem the LDG  antenna switch is the problem so I took the switch cover off and looked around. I cleaned the SO-239 connectors, check the internal connections and all seemed to be great. The only problem spot to me could be the switching relays with internal contact troubles? After exercising the relays the trouble in the LDG antenna switch seemed to be ok. If the trouble comes back this is a 4 position switch and I only use 2 positions I could swap out relays and look at ordering all new relays. At this point all seems to be working well but stay tuned to see if relay swapping and ordering is in the near future.

Relay in the LDG antenna switch

Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

courtesy: https://openclipart.org

When I was in my 30's (30+ years ago), my very good friend Tommy (VE7BLF), reported to me a serious of LDEs that he had heard on 160m CW. At first I was skeptical as the claimed LDE was heard 30 minutes after his CQ.

Tommy happened upon the LDE when tuning around the band one December evening. He heard a weak, warbly ... "CQ CQ CQ de VE7BLF VE7BLF K". A chill went up his spine as he had actually called CQ about 30 minutes earlier, and was answered by a K7. Sure enough, the phantom LDE soon came back to the K7 while Tommy listened to himself send the report, name and his QTH information on the next transmission! Listening to his own signals, 30 minutes later, really shook my friend up as he had no idea what to make of the incident.

Over the next few weeks, Tommy heard several LDEs, some with separations as much as 3 or 4 days and during this time made several recordings of the events. He made a copy of the recordings for me to listen to and the sound of the signal really did send shivers up my back. It was tormented, warbly, with a bit of flutter and very weak. It sounded as though the signal had been ripped apart on a trip to hell and back, adding further to the mystery.

The LDEs stopped as quickly as they had begun and were never heard again but in the meantime, Tommy and I speculated on what might be the cause. Were they genuine LDEs? ... they certainly sounded as if they had been on a very long trip ... or was the explanation something far less sinister? We never did solve the mystery but I had suggested that one likely explanation might be a faulty (or normally operating) VCR, somewhere in the neighborhood. Someone that happened to record at around the same time that Tommy was operating and playing the program back when Tommy happened to be listening. It seemed a far-shot and one that we never tested, preferring to think of it as another one of the mysteries of radio. Unfortunately Tommy became an SK several years ago, never knowing the cause of his mystery signals.

During a recent discussion with Tony (VE7CNF) and Mark (VA7MM) about the newly imagined plasma tubes, the subject of their possible link to LDEs also emerged. I related the above story and Toby immediately went to work with his old VCR! In his own words:

Yes, old VHS recorders could cause long delay echoes. When Steve mentioned it, I had to try it. I attached a photo and some recordings.

I hooked up my old VHS recorder with BNC video and audio cables in and out. I pulled out the video cables a bit to disconnect the shields, so RF could leak into and out of the video ports. My IC7410 was connected to a dummy load and split, through a T connector, to a whip antenna on top of the VHS.Transmit power was 100W to the dummy load.

I transmitted while recording video. When I played it back I could hear the CW signal pretty much on frequency. I tried this at 1820 kHz and the signal had a lot of frequency flutter. At 3510 kHz the playback signal was stable enough for SSB.

So, RF leaking into and out of the video cables of a nearby VHS recorder could explain LDE's where the delay is hours or days.

Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

Some years ago I was professionally involved in the design of this innovative transceiver. I am sure I mentioned this on the blog not too long ago.

Some people managed to find rare examples on the secondhand market and converted them to 70cms use. They are hard to find as not that many were made.

See https://sites.google.com/site/g3xbmqrp3/vuhf/pf8 .

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.

I have just returned from our traditional June caravanning holiday in the Lake District, last year I was buoyed with enthusiasm to have a go at some more portable operation after operating for the first time from the camp site during the 2m UKAC Contest with some encouraging results.

Indeed during the last twelve months I have done some more portable operating, but while VHF/UHF have been rewarding HF portable has been a mixed bag with at best satisfactory results, but then the same can be said of operating HF from home.

This year I planned to again operate in the 2m UKAC Contest but rather than working from the comfort of the caravan I was going to work from some higher ground near the camp site. Unfortunately the weather was awful with very strong winds gusting upward of 50mph and driving rain, even working from the caravan was a no go.

So rather than enjoying this view with a microphone in hand...


... this was the how I spent the evening and as you can see Eddie was equally impressed.

 

When the wind and rain subsided toward the end of the week we did have some nice weather so I decided to try some HF. I had taken just the M0CVO Magitenna end-fed wire and using a 9m fibreglass pole I tried operating with it as a vertical and as a sloper both with and without counterpoises and despite receiving some very big S9+ signals on a number of bands seemed to be incapable of making myself heard, I did make a number of contacts but many reported weak signals and stood little chance of working many of the special event station pile-ups.

It wasn't helped that on the first day the radiating element connector broke, which necessitated cutting it off and stripping back the wire. I suppose in retrospect I should have been expected it as there is no strain relief on this wire, unlike the loops on the other antennas in the M0CVO range, I rectified this with a few cable ties.


I was running the Yaesu FT857-D from a leisure battery and around 30W as I didn't wish to interfere with the TV reception as I knew most caravans would be using wide-band antenna amplifiers because of the poor coverage. Indeed the one time I did wind the power up to 100W one caravan mains breaker tripped out, it may have been coincidence but I didn't wish to put it to the test.

Despite the lack of performance it was great just sitting under the majestic Skiddaw and surrounding hills while I spent a few enjoyable hours operating. I even discovered one of my neighbours was also licensed, nice to meet you Joe (G4LIA)



It was frustrating from a contact point of view and I willingly accept I could be a bad workman so don't wish to blame my tools but I think some serious rethinking on a portable HF antenna is needed. I am away to Scotland next month for a week on the Isle of Skye and a week on Islay, this time in rented cottages and am hoping to make a QSO with the South Kesteven ARS on the club night.

Anyway that all has to wait as the launch of Eggsplorer-1 HAB and the GB2EGG Special Event Station are rapidly approaching.
Andrew Garratt, MØNRD, is a regular contributor to AmateurRadio.com and writes from East Midlands, England. Contact him at [email protected].

Steve G1KQH (font, or is it fount (?) of all knowledge) sent me this link of the homebrew 7MHz SSB transceiver by VK3YE:

New Homebrew 7MHz QRP rig from VK3YE

https://www.youtube.com/watch?v=JMSL5KH42m4&feature=em-subs_digest

Roger Lapthorn, G3XBM, is a regular contributor to AmateurRadio.com and writes from Cambridge, England.

UPDATE ON BILL PASTERNAK WA6ITF: Don Wilbanks AE5DW and I had a conference call with Bill Sunday evening (6/7/15). The good news is: Bill is not in the ICU; the bad news is he is in serious condition after being diagnosed with--as he termed it--”a broken back.” I take this to mean he has fractured at least one vertebrae. He is being treated for the pain associated with such an injury, and thus is not able to write (type), nor can he read for very long. He said it is also impossible for him to receive very many phone calls, so they must be kept to a minimum. Bill stated that for the immediate days ahead, his focus needs to be on the healing process, and improving his health, so that’s where his focus will be. He asked us to pass along his appreciation for all of the thoughts and prayers that have been sent out on his behalf. He also asserted that the Young Ham of the Year Award for 2015 will be awarded this year, with the recipient to be announced very soon. The YHOTY award ceremony takes place at the Huntsville (Alabama) Hamfest in mid-August.