So here I am again. Still young in the amateur radio field. I made that microphone switch and that worked wonderfully. So I decided I’d try my hand at a beam antenna.

I’m not sure what spurred my desire for a 6 meter beam, other than size, maybe. I think my first bits of material didn’t amount to enough to make a 10 meter beam, so a 6 meter would have to suffice.

The start of this project involved deciding where to get my materials. I researched all over the internet and didn’t like the cost of either a complete 6 meter beam, nor the cost of materials to make one. I mulled over materials I may have laying around and found an old deep fringe television antenna, long forgotten in the weed near the fence in the back yard.

Read the rest of this post

Greg Walters, KK4TIX, is a special contributor to AmateurRadio.com and writes from Kentucky, USA.

Amateur Radio Weekly is curated by Cale Mooth K4HCK. Sign up free to receive ham radio's most relevant news, projects, technology and events by e-mail each week at http://www.hamweekly.com.

51km Path courtesy: https://www.google.ca/maps

Toby, VE7CNF, successfully inaugurated his lightwave station earlier this week, on Monday night, completing a nice two-way CW contact between West Vancouver (CN89) and Mayne Island (CN88). The distance spanned was approximately 51km (32 miles), crossing atop the western edges of Vancouver and then across the Strait of Georgia, the body of water separating mainland BC from Vancouver Island.


The details of Toby's homebrew lightwave equipment are described on his web site here and are similar to the station at this end ... also described in earlier blogs. This was the same path covered in my two previous lightwave QSO's with Markus, VE7CA, described here.

Monday evening's weather was clear and calm but at this time of the year, true darkness is a long time coming. With a full-moon just a few nights away, the sky never did get very dark it seemed. I set up my end of the path late in the afternoon, just in front of the house.


            VE7CNF/7 end showing the busy-looking site in operation.



Accompanying Toby to the mountain lookout location were VA7MM, his YL VA7MAY and Markus, VE7CA who initially scouted out and found this nice site for our original lightwave contacts. Thanks to Markus who snapped a picture of the diehard lightwave crew!

VA7MM, VA7MAY and VE7CNF

One thing that I noticed on Monday night was the very loud QRM coming from the sodium vapor lighting used on the ski hills just above Toby's location. The resolution of my Fresnel lens was just not sharp enough to be able to isolate Toby clearly without also being saturated with the lighting noise ... from my end, the ski-hill lighting appeared just above his deep-red LED.

Although Toby's signal was very strong, the lighting hum was strong enough to cause some receiver front-end desensing and slightly modulate Toby's CW signal with a touch of AC ripple. I did not notice this hum when working VE7CA at the same location a couple of years ago. It's possible that there was no snow on the ski-hill at the time and the lights were not turned on.


Moving the receiver just a few degrees to the west made a huge difference, as the hummy background noise level returned to the quiet hush of a dark sky.

Toby's recording of my signal is much cleaner as there are no bright lights when looking towards Mayne Island. It is really interesting to hear the rapid fading, almost a flutter, on my CW signal, as the light passes through various levels of ever-changing haze above the water.


Midway through our one hour QSO, Toby reported that my signal had dropped measurably as had his signal on my end. Although I could see no obvious clouds in the path, I did notice a red glow out in the Strait that had not been there earlier. When I turned off my transmitter, the glow disappeared, indicating that there was indeed some low level haze that had crept up on us, and enough to cause some signal absorption on the path. Thankfully signal levels returned to normal, and actually were a bit stronger, about fifteen minutes later, when the haze thinned and the skies had grown a little darker.

Towards the end of our QSO, I had the chance to test out my #2 receiver. It was built so that I could do some NLOS cloudbounce testing here on the island, without having to separate my main system's transmitter/receiver pairing. At the time, there were no lenses available from the overseas manufacturer, so my quest for a suitable lens led me to a local 'bargain style' hardware importer (Princess Auto), who had a good supply of $5 lenses. The lens seemed to function well in my local tests but it had never been put side-by-side with the higher quality lens in my main transceiver. As it turned out, the $5 lens worked very well, easily detecting the 51km signal although it didn't sound quite as loud since the receiver I built for it was intended to interface with my laptop and lacked the additional audio amp I had built for the main system.

A final interesting observation was made, when on a whim, I placed a large cardboard shield over the bottom quarter of the transceiver's receiver lens. The signal strength didn't appear to change at all. I gradually blocked more and more of the lens but astonishingly, was still able to copy Toby's CW with all but a 1" strip of the lens completely covered! This would tend to indicate that we would be able to communicate with a very much smaller Fresnel or optical glass lens, such as a 4" or even a 2" inch magnifier. As I commented to Toby on CW, the possibilities for experimentation are endless.

All-in-all it was a very successful evening and the mountain-top gang seemed to enjoy the outing as much as I did, and ... the QSL is in the mail.


Hopefully there are other VE7's in or around Vancouver that might be interested in throwing a signal over this way some night ... I'll leave the light on for ya!
Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

Morse Trainer for Ham Radio

I'm always on the lookout for useful tools to help increase my copy speed and enjoyment of CW/Morse Code.  Training applications for beginners that teach letters and letter groups are great to get started but after you're making QSOs and copying at useful speeds those apps get a little stale. 

I recently wrote about using the "Morse News" RSS reader application for PCs. What I liked about Morse News was that it would send the text of news articles as CW.  I found it useful as a natural language trainer but I didn't like being tied to my PC during training.  

I wanted a similar application for my smart phone.

Just the mobile ticket to CW training

I'm not sure how I missed the "Morse Trainer for Ham Radio" app up to now but I've been using it for a couple of weeks now and really find it useful.

Morse Trainer in QSO Text Mode

Training Modes

ebook mode

https://play.google.com/store/apps/details?id=com.wolphi.morsetrainer

I have no affiliation with the maker of this application.  I just wanted to share.



That's all for now

So lower your power and raise your expectations

73/72
Richard, AA4OO
Richard Carpenter, AA4OO, is a regular contributor to AmateurRadio.com and writes from North Carolina, USA. Contact him at [email protected].

This coming weekend will see another CLE challenge, this time in the LF band from 190 - 239.9 kHz.

'CLE's' are 'Co-ordinated Listening Events', and NDB DXers around the world focus their listening time on one small slice of the NDB spectrum.

One nice catch to try for is 'LU' on 214 kHz shown on the left. The 'LU' NDB is in a breathtaking location, high on a mountain meadow at the foot of the North Cascade mountain range. In spite of the towering mountain peaks to the east and to the south, 'LU' is well heard, being reported as far east as Massachusetts and as far west as Hawaii.
The antenna is a 100' top-loaded vertical with, presumably, an extensive ground system as this is a very large site. The transmitter is a 500 watt Nautel. 'LU' is about 20 miles north-east of the Abbotsford Int'l Airport, Vancouver's alternate.

From CLE coordinator Brian Keyte (G3SIA), comes the following reminder:

Our 206th Co-ordinated Listening Event is next weekend.

Do join in if you can. First-time CLE logs will also be very welcome.

Days: Fri. 22 - Mon. 25 April, Midday-Midday, your local time
Frequencies: NDBs from 190 - 239.9 kHz
PLUS: Normal NDBs on 'half-way' frequencies nnn.5 kHz
(from 190.5 - 999.5 kHz)

Both halves are for everyone to try.

Away from Europe many of the frequencies below 240 kHz are busy with
NDBs. In Europe there are very few there, but some DX ones might be heard from North America and maybe from a few other places.

The normal NDBs (not DGPS) which have carriers on the 'half-way'
frequencies (e.g. 284.5 DY, 333.5 VOG, 370.5 LB, 390.5 ITR, 433.5 HEN)
are scattered across Europe but there are very few of them elsewhere.
'Hot spots' are ENG and ITA.
These half-frequencies give comfortable QRM-free listening and probably
some good catches as a result.
America has only one or two (e.g. 381.5 SJX) but East and West coasters
might hear some DX ones.

We last used these 'rules' for CLE190 in January 2015.

Please send your CLE log to the List in a plain text email if possible
(not in an attachment) with 'CLE206' at the start of its title.
Show on each log line:

# The date (e.g. 2016-04-22, etc., or just 22) and UTC.
(the date changes at 00:00 UTC)
# kHz (the nominal published frequency, if known)
# The Call Ident.

Show those main items FIRST - other optional details such as Location
and Distance go LATER in the same line.
If you send interim logs, please also send a 'Final' (complete) log.

As always, tell us your own location and brief details of the equipment
that you were using during the weekend.

Good listening - enjoy the CLE
----------------------------------------------------------
From: Brian Keyte G3SIA ndbcle'at'gmail.com
Location: Surrey, SE England (CLE co-ordinator)
----------------------------------------------------------

(If you wish you could use any one remote receiver for your loggings,
stating the location and owner - with their permission if required.
A remote listener may NOT also use another receiver, local or remote,
to make further loggings for the same CLE).
  
73 

Brian

These listening events serve several purposes. They:

• determine, worldwide, which beacons are actually in service and on-the-air so the online database can be kept up-to-date

• determine, worldwide, which beacons are out-of-service or have gone silent since the last CLE covering this range

• will indicate the state of propagation conditions at the various participant locations

• will give you an indication of how well your LF/MF receiving system is working

• give participants a fun yet challenging activity to keep their listening skills honed

Final details can be found at the NDB List website, and worldwide results, for every participant, will be posted there a few days after the event. If you are a member of the ndblist Group, results will also be e-mailed and posted there.

The very active Yahoo ndblist Group is a great place to learn more about the 'Art of NDB DXing' or to meet other listeners in your region. There is a lot of good information available there and new members are always very welcome.

If you are contemplating getting started on 630m, listening for NDBs  is an excellent way to test out your receive capabilities as there are several NDBs located near this part of the spectrum.

You need not be an ndblist member to participate in the CLEs and all reports, no matter how small, are of much value to the organizers. 'First-time' logs are always VERY welcome!

Reports may be sent to the ndblist or e-mailed to either myself or CLE co- ordinator, Brian Keyte (G3SIA), whose address appears above.

Please ... give the CLE a try ... then let us know what NDB's can be heard from your location! Your report can then be added to the worldwide database to help keep it up-to-date.


Steve McDonald, VE7SL, is a regular contributor to AmateurRadio.com and writes from British Columbia, Canada. Contact him at [email protected].

I finally got a chance today to play on the radio – my first time on the air since the SKCC WES!  Much to my enjoyment 20 meters was actually playing nice for me!

I went over the local park near my office and got set up – it is a absolutely beautiful spring day here in Kansas.

Setup in my Honda Pilot – J-37 key to KX3 coax out to 31′ Jackite pole with vertical wire from a 9:1 UNUN  – works great!

After tuning around a bit and not hearing anything, I decided everyone must be listening and nobody seemed to be calling CQ – so today I decided to only call CQ!

And the contacts began almost immediately….

AI4UL (6327) – Bob gave me a call from North Carolina with a nice 559 signal – he gave me a 569 report.

VA5CW (4326S) – Bill gave me a call from Saskatchewan Canada – and he was very loud – 599!  He was running 100 watts into a yagi, so I am sure that helped.  He dropped his power to 5 watts and I could still copy him very well.  We had a nice chat, and a nice two way QRP QSO!

KF7WJY (14522T) – Tim returned my call from Nevada, but we both had very weak signals 339 both ways.  It was a slug, but we managed to finish up the QSO.  Thanks Tim!

K2PAY (4304S) – Jerry was very weak when he first returned my call from Long Island, NY – 339 here in Kansas.  He gave me a 459.  QSB got the best of his signal when he was telling me his power, so I don’t know if he was QRP or not – I think he said 50 watts, but not sure. (update: a PM on the SKCC sked page Jerry said he was at 50 watts)

KG7VTO (14714) – Bob called me with a 559 from Pendleton, OR.  After reading his QRZ page, and looking at his SKCC number, I figured out he is a pretty new ham.  He just got his ticket fall of 2015 and joined SKCC in December 2015.  Bob had a nice fist and it was a pleasure to work a newer ham – glad you were bit by the CW bug Bob!

W4RMM (2471T) – last QSO of the day goes to Bill from Alabama!  He was pretty weak here in Kansas with a 339, and he gave me a 449.  We kept it short because I had to get back to work.

Thanks to all that answered me – you provided me a truly enjoyable lunch time portable operation!

What a fun day on the radio!  I picked up several new SKCC numbers towards my Centurion Quest, and just had a fun time with the J-37 key.

The map of the Reverse Beacon Network from my calling CQ today – pretty impressive!

Burke Jones, NØHYD, is a regular contributor to AmateurRadio.com and writes from Kansas, USA. Contact him at [email protected].

I finally got a chance today to play on the radio – my first time on the air since the SKCC WES!  Much to my enjoyment 20 meters was actually playing nice for me!

I went over the local park near my office and got set up – it is a absolutely beautiful spring day here in Kansas.

Setup in my Honda Pilot – J-37 key to KX3 coax out to 31′ Jackite pole with vertical wire from a 9:1 UNUN  – works great!

After tuning around a bit and not hearing anything, I decided everyone must be listening and nobody seemed to be calling CQ – so today I decided to only call CQ!

And the contacts began almost immediately….

AI4UL (6327) – Bob gave me a call from North Carolina with a nice 559 signal – he gave me a 569 report.

VA5CW (4326S) – Bill gave me a call from Saskatchewan Canada – and he was very loud – 599!  He was running 100 watts into a yagi, so I am sure that helped.  He dropped his power to 5 watts and I could still copy him very well.  We had a nice chat, and a nice two way QRP QSO!

KF7WJY (14522T) – Tim returned my call from Nevada, but we both had very weak signals 339 both ways.  It was a slug, but we managed to finish up the QSO.  Thanks Tim!

K2PAY (4304S) – Jerry was very weak when he first returned my call from Long Island, NY – 339 here in Kansas.  He gave me a 459.  QSB got the best of his signal when he was telling me his power, so I don’t know if he was QRP or not – I think he said 50 watts, but not sure. (update: a PM on the SKCC sked page Jerry said he was at 50 watts)

KG7VTO (14714) – Bob called me with a 559 from Pendleton, OR.  After reading his QRZ page, and looking at his SKCC number, I figured out he is a pretty new ham.  He just got his ticket fall of 2015 and joined SKCC in December 2015.  Bob had a nice fist and it was a pleasure to work a newer ham – glad you were bit by the CW bug Bob!

W4RMM (2471T) – last QSO of the day goes to Bill from Alabama!  He was pretty weak here in Kansas with a 339, and he gave me a 449.  We kept it short because I had to get back to work.

Thanks to all that answered me – you provided me a truly enjoyable lunch time portable operation!

What a fun day on the radio!  I picked up several new SKCC numbers towards my Centurion Quest, and just had a fun time with the J-37 key.

The map of the Reverse Beacon Network from my calling CQ today – pretty impressive!

Burke Jones, NØHYD, is a regular contributor to AmateurRadio.com and writes from Kansas, USA. Contact him at [email protected].