AmateurRadio.com

Although I built the W1GHZ 903-MHz transverter and 756-MHz LO boards last winter, I didn’t have time or inclination to test them until this week.  These were purchased as a part of the first (October 2009) group buy orchestrated by W8ISS.  Instead of the INA-10386 MMIC recommended by W1GHZ, the W8ISS kits featured a Sirenza SGA-3586Z MMIC as the LNA, as suggested by the 4s_microwave group.  A better part (with NF < 2 dB), recommended to me by W9SZ, is the the SGA-4586Z, which I used on my 903 board and will use on my 1296 board.  This requires the bias resistor (R3, 51 ohms, on the 1296 board) to be changed to 100 ohms.

Since there is a lot of foliage between me and the W3APL beacon, I took the liberty of carting the transverter and IF rig to the beacon site (sorry no photos) on my lunch break yesterday.  Sure enough, it worked like a charm with the beacon pounding in on 147.0615 MHz.  The nominal beacon frequency is 903.055 MHz, so I don’t know if the difference is in my LO or the not-GPS-locked beacon drifting around.  At any rate, I’m pleased enough to continue the project…

The 1296RSU transverter and 1152-MHz LO boards are on the left in the photo above.  They have not yet been populated, but that’s an evening’s work.

The winds of economic change are starting to have an effect on our online business. Because of that I am spending a lot more time on the computer trying to maintain our search engine positions and think of new revenue streams, with the consequence that I have less time or enthusiasm for blogging and other radio-related activities.

The only noteworthy item of radio news at G4ILO has been the acquisition of an SCS Tracker / DSP TNC for HF APRS packet. It is shown in the picture sitting atop my K2. When I find the time, I will write a review of this TNC for my main (non-blog) website. For the time being, all I will say is that I did a side by side comparison with the best of the PC sound card decoders and it was very quickly apparent that the SCS TNC decoded many stations the sound card software didn’t. Considering what it cost, I’d have been very disappointed if it hadn’t.

I should share with you that after my blog post about the Marconi Memorial CW contest last weekend, I had an e-mail from a friend who will remain nameless, who said ‘Nice to see you doing some real radio for a change’. I replied that it was nice to keep the ‘Wireless Preservation Society’ in business…

So this weekend I thought it would be nice to play around with some digital modes on HF. I didn’t know, but apparently it was the WAE RTTY contest taking place. I tuned across the digi bands and there was RTTY everywhere. Somehow, I didn’t fancy doing that, though I decoded a few for fun, using MMTTY. I’d read some things about the PSK Reporter network in the week, so I thought it might be fun to play some PSK. I set up Digital Master (DM780)’s Superbrowser, so I could sit my receiver on 14.070 and the Superbrowser would decode the streams of all the different QSOs going on. Quite interesting – but didn’t grab me as far as transmitting was concerned!

I decided I was more interested in playing with WSPR again. I had the software on my laptop from the last time I used it at the end of last year. I quickly set it going on 7.038MHz (this was mid afternoon) and was soon logging other WSPR users across the country, across Europe and as far away as UA3ARC (KO85). I couldn’t get it to transmit though. When it was time to transmit, the speaker emitted a click and that was it.

I couldn’t understand what was up – and frankly gave up for a while and just ran it on receive, as that was interesting enough anyway. But of course, curiosity got the better of me (must be the cats’ influence) and I tinkered around a bit, without success. I googled around and found that someone had similar issues solved by a reinstall of WSPR.

I removed the program directory, deleted all the files and reinstalled WSPR 2.11. It worked! I could hear tones on transmit! No idea why this had happened, but glad to be QRV again.

By the time all this had happened, 7MHz was starting to be swamped by the WAE contest stations, so a mere watt or so of WSPR wasn’t going to go far was it? To my surprise, my 1W signal was heard by a number of German stations as well as in northern Italy. Later on, I set the transmitter going for a period or two and was heard in Serbia at around 2000km.

With the contest out the way, I might try and run the 1W WSPR signal in the evenings this week and see how I get on. It ought to go a reasonable way…

As I have bemoaned in the past, good QSL card designs are hard to come by.  This is my attempt to remedy that situation.  The front has my callsign, with a QR code linking the interested recipient to this web site.  The reverse is postcard-friendly with space for six QSOs, corresponding to 1.8/3.5/7/14/21/28 or 50/144/222/432/903/1296 MHz.  The address space can be used for a personal note if the card is mailed in an envelope.  The card is also QTH-unaware.  This means that I’ll have to write or sticker my way along, but I won’t be limited by my moves and travels.  The font is Gil Sans everywhere.  The cards were laid out using Adobe Illustrator CS4 and printed on 100-lb matte cover stock by Carlisle Printing, who printed my last cards as well.

One final note:  one week after SS CW, I am already up to 43/50 states for my CW WAS from Maryland using LoTW.   I’m not sure how many of these QSLs will actually make it into circulation at this rate.  Be sure to work me so you can have your own copy of this rare collector’s item!

Last weekend I spent about 13 hours or so participating in the ARRL CW Sweepstakes contest. The last time I participated in this contest was in 2008, and although I started out slowly, I managed to finish with a final score just a bit higher than the 2008 effort. In 2008, I had 333 QSOs in about 15 1/2 hours with 79 out of the 80 possible multipliers, missing only NT (Northwest Territories in Canada) for a score of 52,614 points. This year, in 13 hours, I had 376 QSOs missing 3 multipliers (Nebraska, which I heard, but couldn’t work, South Bay, which I heard once, and didn’t work, and Newfoundland/Labrador, which I never heard), giving me a total of 57,904 points. Considering that I had fewer multipliers and a higher score in a shorter amount of time, I was pretty happy.

I didn’t try to “run” stations at all for the first day of the contest, there was just too much competition, but later on when things quieted down I was able to get run frequencies on 40m and 80m from time to time and really enjoyed working the stations calling. I did have a couple of things happen while running on 80m that I thought were noteworthy. First, in the middle of my run I got called by W1AW, the Hiram Percy Maxim Memorial station located at ARRL Headquarters. Although I’ve had contact with W1AW many times (they are not very far from here so are very easy to work on the lower bands), and have even operated from that station myself, it’s always fun to make contact with them, and even more special when they call me (rather than the other way around). The other thing that happened was that a bit later I was running on another 80m frequency at the bottom of the band (3.505mhz) and a station called and asked if I would QSY (change frequencies) because a DX station (5R8Z, I believe) was about to come on the air and that was the frequency that he’d announced he’d be moving to. I moved right away, because even though legally, since I was there first I could stay, it was in the “ham spirit” to move so that others could contact that DX station. (Frankly, I would have been very happy to make that contact myself, but I never heard him.) In any case, it was the right thing to do, and I was happy to do it.

My apologies for the hideously long load times for this blog.  I’ve been informed that the number of RSS feeds on the right is making the page take a long time to load.  I’ve been trying to build something similar to the blogroll you get at Blogger, but unfortunately WordPress.com doesn’t offer a blogroll widget that sorts by last post date and shows the title of the last post.  It’s either a full blown RSS feed for each blog you want to keep up with or a list of static links.  So, most of the RSS feeds are deactivated for now until I can figure out another solution.

I consider blogrolls an important part of amateur radio blogademia.  If you have me in your blogroll, thank you.  I hope to get your blog back in mine soon….

(If anyone reading this has better WordPress fu than me, please give me some pointers!)

73

Goody

Last week’s map of what I’d heard from the mobile seemed to cause a little interest (thank you!), so I thought I’d keep a mental note of what I heard over the week and put a map together. It gives an idea of what conditions have been like, which I hope you find of interest

View Heard this week 12/11/10 in a larger map

A couple of ‘spots’ that I didn’t hear last week. GB3LW in Central London came through on 433.150 (same as GB3DI near Didcot) a couple of times, with good signals. GB3SN on 145.725 was weak but audible this morning and GB3WR was consistent through the week, but a little louder than usual this morning.

Something as yet unidentified is coming through weakly on 145.750. I will keep an eye on this one and see what it turns out to be.

Most active repeater in the morning when I’m listening seems to be the GB3FN Farnham box with a good number on their commuter net. Rob, G4XUT and I do our best on GB3TD!