AmateurRadio.com

View when flying from Vancouver, BC to Seattle, WA

I have spent this week in Seattle, WA on business. Did not have much time for radio but I have been using the DVAP dongle and been linking into the repeater back in Ottawa either directly or via REF016B.

The DVAP works well whilst travelling.  I even used it to link through to talk to the students at the Carleton University Amateur Radio Club.  I could then chat to them as they were working on building a PSK31 interface for the FT817. I have also chatted with the locals, some of whom commented that I sound like I am local.  I will continue packing the DVAP with the IC-91AD in future.  By the way, there was no trouble taking the HT in my hand luggage on the plane, no questions at Ottawa or going through customs US Customs at Vancouver.  (For those not familiar flying from Canada to the US it is not unusual to pass through US immigration/customs in a Canadian airport so you land as a ‘domestic’ flight in the US).

Today I had a little time to visit a hardware store called Hardwicks that was close to the hotel.  This reminded me of the old ironmongers store that was in the village I grew-up in, in Lancashire, UK.  however, Hardwicks was about 5 times bigger.  Great to wander around and look at the range of tools and hardware.

I also visited a RadioShack store (in Canada now called the Source) and was pleased to see some drawers with components in.  At least you can still get a voltage regulator on the high street!

Travelling back today.

Welcome to Handiham World!

Photo: Larry Huggins, KA0LSG, Handiham volunteer. Hap Holly, KC9RP, is in the background since our Handiham booth and the RAIN Report booth were neighbors.

Photo: Volunteer John Pedley, N0IPO, hangs the banner at the back of the booth because he is the tallest of our crew and can reach the hooks.

Photo: Larry, KA0LSG, John, N0BFJ, and Ken, KB3LLA, on booth duty.

Welcome to Handiham World!

Photo: Larry Huggins, KA0LSG, Handiham volunteer. Hap Holly, KC9RP, is in the background since our Handiham booth and the RAIN Report booth were neighbors.

Photo: Volunteer John Pedley, N0IPO, hangs the banner at the back of the booth because he is the tallest of our crew and can reach the hooks.

Photo: Larry, KA0LSG, John, N0BFJ, and Ken, KB3LLA, on booth duty.

Bob Heil, K9EID, is a very busy guy (especially today as he gets ready to debut his new show on Leo Laporte’s TWiT network called HAM Nation), but I had the opportunity to catch up with him to find out more about his plans:

Bob, when Leo Laporte, “The Tech Guy,” offered you the opportunity to host a show about ham radio on his amazing TWiT Network, what was your first reaction?

I was very thrilled and extremely honored to have Leo recognize the importance of the ham radio community.

Talk some about the equipment you’ll be using to record the show. Will you be broadcasting live?

The show will be done live from my station lab where I develop all of our amateur radio as well as professional series products. I use a P.C. based computer fed with an Alesis Mix 8 USB mixer. Using one of our PR 40 into the mixer, it gives me great flexibility with tailoring the audio right where we need it. For camera, I am using what most of the TWIT hosts are using, the new Logitech C 910 HD camera. Very small but extremely high quality for the size and cost.

You’re going to have a massive technically-oriented audience that may not have much familiarity with Amateur Radio. What are some of the goals you’re hoping to achieve with the show?

It is amazing how many hams are in that TWiT audience. It was one of the leading factors that led Leo to invite our industry onto his network. As Leo, I will let the chat room guide us to the subjects they want to know more about but I already have guests lined up to do all types of technical things – kit building, antennas, types of transceivers, digital communications, D Star, emergency communications, Field Day activities, etc. . . any ideas? Please pass them on. We, the amateur radio community now has a platform on Tuesday night where we can share with the world.

What are some of your personal interests as a ham? What equipment do you run in your shack?

If it were not for my interest in ham radio back in the mid 50’s as a high school teenager, I would never have been able to accomplish anything close to what has happened. The basis of everything I do was learned from great mentors I met on the air. I spent 17 years as a technician exploring SERIOUS VHF work. Since 1976 when I upgraded, I have been all over the map but I STILL revert to much of my original gear that I have had over the years including my 1956 Harvey wells, 1958 CE 20A, 1962 HT 37. I love all of the vintage gear and you can find me on AM several nights a week. Because my station is my lab for my company, I have many late model transceivers to keep up with the technology and what needs to be done to make then sound good.

Tune in Tuesday nights, starting tonight, 6pm Pacific/9pm Eastern at http://live.twit.tv.  You’ll also be able to watch the show via the embedded video below.  Good luck, Bob!

Recent comments on some of the amateur radio web forums have attempted to posit the point that someone is not a “REAL HAM” unless he or she meets certain arbitrary criteria.  Those include such requirements as passing a code test to get licensed, using equipment with tubes in it, or being able to build a transceiver from scratch, using only a pie tin, a set of shoe laces, and a handful of grab-bag parts from a swap meet.

With apologizes to a certain comedian who has made a gazillion dollars with his “You might be a redneck if…” shtick, here goes my feeble attempt at a similar definition of a “REAL HAM:”

• If you have a ham band antenna on all four fenders of your car, the roof, in the trunk lip, and another one clamped to the trailer hitch with an alligator clip and duct tape…you might be a “REAL HAM!”

• If your wife…sorry, “XYL”…asks you to help bring in the groceries while you are chasing a rare one and you yell back, “QRX!  QRX!”…you might be a “REAL HAM!”

• If you can recite the numbers of every driver, modulator, and final amplifier tube in every Heathkit, Drake or Collins transmitter or amplifier ever made, and name the best idling grid current for 90% of them…you might be a “REAL HAM!”

• If when you were a teenager, you tore open the cases of your little brother’s “Flash Gordon” walkie-talkies just to see if you could modify them to work on 10 meters or used the pans from your sister’s Easy-Bake oven to breadboard a code-practice oscillator…you might be a “REAL HAM!”

• If you have ever tried to ker-chunk the repeater while riding in a funeral procession…you might be a “REAL HAM!”

• If your kids…sorry, “harmonics”…know your call sign, your grid square, and your 10-10 number, but not your middle name…you might be a “REAL HAM!”

• If you have at least a half-dozen different sets of hilarious (at least to you and the guys on your 75-meter roundtable) phonetics for your call letters…you might be a “REAL HAM!”

• If you have more countries confirmed than you have dollars in your 401-K and more bucks invested in your tower, rotor and tri-bander than you have in your retirement annuity…you might be a “REAL HAM!”

• If you have ever taken an HT to church or a scanner to the courthouse while on jury duty…you might be a “REAL HAM!”

• If you painted the walls of the new playroom downstairs in the colors of the resistor color code…you might be a “REAL HAM!”

• If you ever chopped up your wife’s…sorry, XYL’s…patio furniture to build a Yagi for 15…you might be a “REAL HAM!”

• If you have ever attempted to use a gutter downspout, the hubcap from a ’93 Buick, your dog’s food dish, your neighbor’s rose trellis, the vent hose from a clothes dryer, a wicket from your mom’s croquet set, or a one-quart metal Thermos bottle (with or without coffee) as an antenna…you might be a “REAL HAM!”

• If you read the ARRL “Repeater Directory” or the latest catalog from one of the big “candy stores” while taking your daily “constitutional” …you might be a “REAL HAM!”

• If you know the formulae for Ohm’s Law and Kirchoff’s Law and can read a Smith Chart from 100 feet but have no idea who Paris Hilton is…you might be a “REAL HAM!”

• If you typically go to hamfests wearing your “Hams do it with frequency” tee-shirt, a “KNOW CODE” belt buckle, at least two HTs clipped to your belt and an earpiece for each in each ear, a pith helmet with a 440 ground plane sticking out the top, and a blinking-LED button with your callsign on it…you might be a “REAL HAM!”

• If you know the prefixes for every DXCC entity as well as their beam headings but you don’t know your oldest kid’s…sorry, “first harmonic’s”…birthday…you might be a “REAL HAM!”

• If you ever flagged down a local utility bucket truck and tried to bribe the guy to hang some ropes and pulleys in the trees in the backyard…you might be a “REAL HAM!”

• If you ever tried to convince your fiancé that Dayton, Ohio, has replaced Niagara Falls as the Honeymoon Capitol of the World and that the first part of May is absolutely the best time for a wedding…you might be a “REAL HAM!”

• Of course, if you MET your fiancé in the flea market at Dayton when she tried to jaw you down on the price of a Hallicrafters HT-37 with a bad power transformer…you might be a “REAL HAM!”

Finally, if you call beers “807s,” money “green stamps,” your house your “home QTH,” your car your “moe-byle,” your base station your “shack,” the FCC “the friendly candy company,” anything a salesman tells you “Bravo Sierra,” the big brouhaha at the last club meeting “a Charlie Foxtrot,” your wife your “XYL,” and your kids “harmonics” …you might be a “REAL HAM!”

Ain’t it fun?

This is an unbuilt kit for an Off-Air Frequency Standard from Spectrum Communications. It is a crystal calibrator phase locked to BBC Radio 4 on 198kHz with an output of 2V peak to peak at 10MHz.

I got this with the intention of using it to frequency lock my Elecraft K3 using the KREF3 module. Regular readers may remember that last year I purchased a surplus Efratom LPRO-101 rubidium frequency standard to calibrate my radios. But a rubidium frequency standard has a finite life which will be used up very quickly if it is turned on all day to use as a real-time frequency reference. My intention is that the off-air frequency standard will run all day and keep my K3 as accurate as I need it to be.

I ordered the full kit from Spectrum. I was disappointed to find that what looked like a die cast box in the picture is actually a plastic box with a grey metallic finish. If I had realized it was not a die cast box I would probably have opted for the cheaper PCB kit and ordered one of the nice extruded aluminium alloy Hammond cases for the project. I hope it will be RF-proof enough to work in my shack environment where up to 100W may be used into indoor antennas.

The other disappointment was the rather home made looking PCB which does not have a silk screened component overlay. There is a printed layout in the instruction sheet but relating the component positions to the holes on the PCB is easier said than done. My initial thought was that I am not going to be able to build this. What I will have to do is draw the component overlay on to the PCB itself prior to construction. But it isn’t easy with my diminishing eyesight and need to use different strength lenses which makes switching between things at different distances a real trial. Having a silk screened PCB would just have made things a bit easier. I think my days of kit building are definitely numbered.

This is an unbuilt kit for an Off-Air Frequency Standard from Spectrum Communications. It is a crystal calibrator phase locked to BBC Radio 4 on 198kHz with an output of 2V peak to peak at 10MHz.

I got this with the intention of using it to frequency lock my Elecraft K3 using the KREF3 module. Regular readers may remember that last year I purchased a surplus Efratom LPRO-101 rubidium frequency standard to calibrate my radios. But a rubidium frequency standard has a finite life which will be used up very quickly if it is turned on all day to use as a real-time frequency reference. My intention is that the off-air frequency standard will run all day and keep my K3 as accurate as I need it to be.

I ordered the full kit from Spectrum. I was disappointed to find that what looked like a die cast box in the picture is actually a plastic box with a grey metallic finish. If I had realized it was not a die cast box I would probably have opted for the cheaper PCB kit and ordered one of the nice extruded aluminium alloy Hammond cases for the project. I hope it will be RF-proof enough to work in my shack environment where up to 100W may be used into indoor antennas.

The other disappointment was the rather home made looking PCB which does not have a silk screened component overlay. There is a printed layout in the instruction sheet but relating the component positions to the holes on the PCB is easier said than done. My initial thought was that I am not going to be able to build this. What I will have to do is draw the component overlay on to the PCB itself prior to construction. But it isn’t easy with my diminishing eyesight and need to use different strength lenses which makes switching between things at different distances a real trial. Having a silk screened PCB would just have made things a bit easier. I think my days of kit building are definitely numbered.