AmateurRadio.com

Since I didn’t want the beam lying in the grass the whole winter I did temporarely mount it on a 4m pole. I have it in a fixed position to the USA now. It’s far to low to give good performance but still it equals the vertical already in that direction. Merry Christmas everyone…

Bas, PE4BAS, is a regular contributor to AmateurRadio.com and writes from Groningen, Netherlands. Contact him at [email protected].

JT65 HF with webSDR

It’s cheating I know. But considering I still had my thoughts about my 5W 40m signal being received in daylight by VP8DMH Mike in Antarctica. It came across my mind that Mike could have been testing with a webSDR located in Europe. Is that possible, as JT65 is time related and internet has a bit delay. So, I would like to test it and set up JT65 with a webSDR in the USA. At the middle of the day I reported some American JT65 calls to PSK reporter. So, you cannot always believe spots via the internet. Although received by radio, the reporting station can be everywere, propagation or not! With that in mind I mailed Mike down on Antarctica, I wished to solve the mystery. Did he use a webSDR in Europe or his own receiver?

Here our small conversation: 

 

On 23/Dec 04:15, BasLev wrote:

 

> Hello Mike,

> 

> I hope you don’t mind writing you but I have something on my

> mind that I would like to solve.  I was received by your

> station at 20-12-2011 see my

> blogpost:?http://pe4bas.blogspot.com/2011/12/40m-jt65-surprise.html

> But since you were in daylight and far from the greyline this

> would be impossible in my opinion.  You also wrote??on

> QRZ.com?your equipment would not arrive before christmas.  It

> could be received by a SW receiver of course. But it could also

> be that you were listening/decoding via a webSDR?

> 

> Can you help me out with this??

Hi Bas,

 

Thanks for the mail.  My main radio is indeed on the ship, and

won’t be with me for another week or so, but I do have my FT-817

with me, and I’ve been using that for WSPR and JT-65A in the

meantime.

 

As for propagation, strange things happen down here!  We have a

suprisingly good nighttime path to the EU on 40m, even though

it’s 24-hour daylight here at the moment.  I recently did some

tests over a few days using WSPR, which I wrote about here:

http://clarkema.org/posts/2011-12/2011-12-12-propagation-videos.html

You might be interested in the video linked at the bottom of the

4th paragraph, which shows propagation from here to Europe as

night falls.

 

I did make a couple of European JT65 QSOs on teh 20th as well as

just listening, so hopefully I’ll see you in the log at some

point.

 

73,

 

— 

Mike, VP8DMH

 

P.S. my location given the pskreporter website is out of date; my

current QTH is HB64ok.

A very fast reply and amazing that I can just e-mail to someone in Antarctica. So he did receive me on his FT-817. And he even made a few QSOs to Europe. And most interesting of all he has his own blog and actually does something usefull with the WSPR data. I was really surprised and can recommend this video. It gives a nice insight in the Antarctic propagation. Anyway, e-mail still is the best way to verify if you want to be certain a station heard your signal, especially in suspicious situations. Internet can be usefull but also very misleading and that concerns not only amateurradio !!

A small JT65 cheat..

Bas, PE4BAS, is a regular contributor to AmateurRadio.com and writes from Groningen, Netherlands. Contact him at [email protected].

When I first got started in amateur radio (many years ago), one of the engineers that I was working with at a summer job told me “Don’t get stuck on 2 Meter FM”. At the time I was a college student and felt lucky enough to have 1) found time to pass my Novice exam, including Morse Code test, 2) found time to travel 150 miles to the regional FCC office and pass my Technician exam, and 3) scraped up enough money to buy a basic 2 Meter FM mobile rig. I was in Technician ham heaven, playing around on 2 Meter FM, both simplex and repeaters. Oh, and we had this cool thing called autopatch that let you make actual phone calls from your car. I really wasn’t worried about getting “stuck on two”.

Even though my discussions with this Old Fart Experienced Radio Amateur revealed that he didn’t see 2 Meter FM as Real Ham Radio, I could see that he had a point. Two meter FM is only small part of the ham radio universe and it would be easy to just hang out there and miss out on a lot of other things. I was reminded of this recently by K3NG’s post: Things I Wish I Knew When I Was A Young Radio Artisan. I agree with most of his comments with the exception of this one:

Don’t get your start on 2 meter repeaters.

This took me back to the comments from the Experienced Radio Amateur from years ago. I get the point — starting out on 2 Meter FM and Repeaters can give you a limited view of ham radio — but I see it as the perfect platform for getting started. Here’s what is working in my area with new Techs: get them started with a dualband FM rig (usually an HT) so they have some on-the-air success. This also puts them in touch with the local ham community, where we not-so-subtlely expose them to other bands, modes and activities. They hear the other guys talking on the repeater about working DX on 10 Meters and start thinking about how to pursue that as a Tech. From there, it just expands out to all kinds of bands and modes.

Just for the record, I guess I did follow the advice of the Experienced Radio Amateur and managed to not “get stuck on two” (i.e., I’ve worked all of the bands from 80M to 10 GHz, earning WAS, WAC, DXCC and VUCC.)

73, Bob K0NR

Bob Witte, KØNR, is a regular contributor to AmateurRadio.com and writes from Colorado, USA. Contact him at [email protected].

Last weekend I thought it was about time that I made some D-STAR contacts again. Out here in the wilderness, I use my DVAP to connect to the network. As I have noted on the blog before, I often use the Win-DV software from http://www.dutch-star.eu
That software allows me to do a bit more than the DVAP-Tool software from AA4RC – just in terms of being able to set up connections on the PC rather than having to do it on the E-92.

Anyway, last weekend I started up the Win-DV software connected it to REF001C and went downstairs with my handheld. I hadn’t heard anything after a while so I did a quick check and found that I had been disconnected. No big deal, I’d probably done something silly!

Connected it and checked again. I’d been disconnected. Probably something to do with 1C so tried another reflector. Same again!

Hmmm. Now my mind was starting to wonder. I closed down Win-DV and started up DVAP-Tool. Guess what? It connected and stayed there!

I didn’t have anytime to investigate at the time, but this evening I checked out the Dutch*star site. It seems that a decision was taken by ‘DPLUS Network managers’ not to allow DVAPs or DV-Dongles to connect to the network unless they sent the hardware serial number. DVAP-Tool was doing that and Win-DV was not, hence anyone using Win-DV would get disconnected.

Why was this done? This blog has never been about radio politics and we’re not going to start now. You can form your own opinion I am sure.

However, the good news is that the latest release of Win-DV allows you to select the ‘HARDWARE’ option to send your DVAP serial number to the network.

I tested it this evening and it’s working fine. You can read more detail on the Dutch*Star site.

Tim Kirby, G4VXE, is a regular contributor to AmateurRadio.com and writes from Oxfordshire, England. Contact him at [email protected].

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

BREAKING NEWS!  Mack has rebooted and W4AX.com is back online. It is a huge blessing  and thanks again to Mack and the host of others who serve all of us! YAHOOO>>> Grinches lose! W4AX.COM is online again! Belay my last!

A few years ago, we did not know the term, Software Defined Radio but now it has become one of many new technologies that we hams are learning to adapt to our needs. As an antenna restricted condo dweller, I’ve found it most helpful for being able to listen to the bands at various times through the day.

Yesterday I learned my favorite site, W4AX.com is shut down due to abuse by non-hams and other constraints. A big thanks to Mack, W4AX and others who are the unsung heros that provide services like these and have allowed access to others over the years. The Reverse Beacon Network is another great service and we often forget the time and expense that our fellow hams have put into keeping them going.  As a blogger with multiple sites, I understand the challenges and resources it takes all too well.

I’ll miss being able to check the bands 24 x 7 on my favorite site, but perhaps it will prompt me and others to set up our own SDR site and share it with others. I salute those who like Mack paved the way for new technology to provide access to so many hams. Sorry that the burden got too heavy to keep it going, but know your work was appreciated by many. I’ll be sure to let others who are working behind the scenes know that they are appreciated too.

Blessings gang of pioneers and Happy Holidays to you all!

72,

Kelly K4UPG

Kelly McClelland, K4UPG, is a regular contributor to AmateurRadio.com and writes from Florida, USA. Contact him at [email protected].

The excitement had me fill in the wrong band a new one is coming for 14 MHZ (click for full size)

Attic dipole (click to enlarge)

One of my goals during the CQWW CW contest was to drop my power and beat my last 1000 miles per watt record. Up until this past contest
my miles per watt all time high was 8325 miles per watt!! Now you also have to remember I am not running a huge tower loaded with eye candy beams. My radio waves into ham land are done with an attic dipole in a "Z" configuration (Alpha Delta DX-EE), so it has a nice wooden roof above an insulated ceiling below. Yes it is not the latest and greatest of antennas but I'm not doing to bad with it. During the contest  I dropped the Elecraft K3's power to 500mW's to see what I could do. To my surprise ZS4TX came back to me... I made contact and exchanged contest info. After the contest I emailed ZS4TX (Bernie) and he was shocked that I was running QRPp at 500mW's. My signal according to Bernie was above average into South Africa. So my new "to beat record" is 16,737 miles per watt I more than doubled my last record!!!
 

The folded or "Z" part (click to enlarge)

Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].