AmateurRadio.com

The handsome man in this photo is my father, the little one me. It was 1967 and he introduced me to this little magic box full of sound called radio. I guess the bug bit me then. His passion was photography and art, not electronics, because that was his 9-to-5 job.

But he always supported me in my endeavours and taught me so much. The Weller soldering station he used for so long is sitting proudly on my desk, now being used by me. He was the best father I could have wished for.

He is with the angels now, without pain, without frustration. I am sad, but I am glad. Thanks dad, for everything.

I got my April copy of CQ and it’s no April Fool’s joke – the issue is dedicated to QRP!  How cool is that?

Included feature articles:

QRP in Paradise by Woody Hester WD9F
The “Splinter” QRPp Trans-Reciver by Bill Minikiewicz W4FSV
A QRP Superstation by R. Scot Rought KA8SMA
CQ Reviews – the MFJ-9200 QRPocket CW Transciever by Rich Moseson W2VU
Learning Curve – A QRP Primer by Rich Arland K7SZ (who I had the honor of working this past weekend in the QRP ARCI Spring QSO Party).
The regular QRP column by Cam Hartford N6GA
The regular Kit Building column by Joe Eisenberg K0NEB

Yes, we always have great QRP publications at our fingertips like QRP Quarterly and Sprat; but it’s nice when the “mainstream” publications feature QRP.  You never know, maybe we’ll soon meet some new friends who will be joining us after being introduced to QRP by the April edition of CQ.

Thanks to Rich Moseson and all the fine editors at CQ.  And a special thanks to Cam and Joe, who keep the fine articles coming all year ’round!

72 de Larry W2LJ
QRP – When you care to send the very least!

I was browsing around the Ham Radio section of e-Bay the other evening when I came across a Palstar KH-6 going for a modest price. I knew a little about them, having heard that some SOTA participants had used them for activations on 50MHz.

The auction was just ending so I popped in a last minute bid to see what would happen. To my surprise, I won!

The rig arrived yesterday. It seems to work ok and I have done the obligatory across the shack test. Transmitted audio sounded good on the FT847. I put the rig on the external collinear and perhaps not surprisingly the receiver overloaded. However, I could hear the GB3RAL beacon on 50.050.

The challenge, as I have found before is how well such a short aerial will do. However, I’m hoping for some local contacts and perhaps some more distant ones from the top of White Horse Hill or similar summits.

Thanks to K7TRY, now we know!

 Hopefully, I will be seeing this for myself in just a few short weeks!

72 de Larry W2LJ

Got this nice e-mail from John K4BAI, QRPer and contester, exemplar :

Hi Larry:

Hope you will be able to participate in our annual Georgia QSO Party on Apri1 14 and 15. All information can be found on the GQP Home Page at http://georgiaqsoparty.org. It runs 10 hours on Sat (1800Z to 0359Z Sunday) and 10 hours on Sunday (14Z to 2359Z) on 160 to 6 meters CW/Digital and SSB. Georgia with 159 counties has more counties than any other US state other than TX and the small size of most of them means that the mobiles and rovers are frequently changing counties.

Suggested frequencies are 1815 and 45 kHz up on CW and on 1865, 3810, 7190, 14250, 21300, and 28450 SSB. Also 50095 and 50135 on 6M. Digital would be near traditional digital calling frequencies. Multipliers for Mixed Mode stations are counted per mode (not per band).

Band conditions have been pretty good recently, including 20M often being open at night and 15 and 10 providing a lot of QSOs during the daylight hours.

Rapidly moving mobiles have been a hallmark of the GQP, particularly on CW.

Please join in the fun for as much time and you can and send in your log.

Awards are available for high power, low power, and QRP entries from the various states, provinces, countries and GA counties.

Thanks for your support and for passing this information on to others who might be interested.

I should be QRV from many GA counties as W4AN/M.

73, John, K4BAI.

So folks, if you have some time this weekend, let’s support our fellow Hams from the great state of Georgia.  There should be lots of activity – build up your logs and perhaps even be the QRP winner from your state!

72 de Larry W2LJ
QRP – When you care to send the very least!

1. The cable is good and ready for use.
2. The cable is open through the outer shield.
3. The cable is open through the center conductor.
4. The center conductor is shorted to the shield.
5. An intermittent condition exists that causes a short or open when the cable is flexed. 

Photo:  Simple test gear for a continuity check includes a clip lead and a multimeter with a continuity buzzer. 

1. Take one end of the disconnected coax.  Remember, we are NOT able to test continuity with the coax connected to any equipment or antennas. Touch one multimeter lead to the center pin of the PL-259 plug and the other to the outer metal part of the plug.  You should hear nothing, indicating that the cable is not shorted.  This is always the first test, because we must eliminate the possibility of shorts before we can make any assumptions about the center conductors or the shield.  
2. Next, take the clip lead and use it to short the coax at one end by connecting the center pin of one of the PL-259 connectors (it doesn’t matter which one) to the shield side of that same connector.  Take the free end of the coax and touch one multimeter probe to the center pin and the other to the metal shield of that PL-259.  You should now hear the buzzer that indicates continuity.  
3. You have now completed the basic tests, because you have determined that the cable is not shorted and by passing a current through the entire length of the center conductor and back through the shield, you have determined that both the center conductor and shield are intact.  The final test is to flex the cable and wiggle the connectors while performing both of these tests again.  If it helps, you can add two additional clip leads to connect  the multimeter probes so that you don’t have to try to hold them in contact with the PL connectors. This will help determine if the cable is intermittent.
4. If the cable fails any of the tests, feel free to test the shield to shield and center pin to center pin connections separately.  Never use a cable that is suspect, because it could cause damage to your equipment.  
5. Last but not to be missed is a final check along the length of the cable for any obvious bad spots, such as a break in the outer jacket or any suspicious bends or bumps in the cable.