AmateurRadio.com

Posted by Todd., W7TAO on the KX3 e-mail reflector.  Todd, like Steve WG0AT is also quite the portable ops devotee. He also has pack goats that he brings along on his adventures; but not this time.

The sheer beauty of this SOTA site is magnificent.  I think you will agree

72 de Larry W2LJ
QRP – When you care to send the very least!

Having got an AlexLoop WalkHam antenna I needed some way of holding it up whilst it was in use. After considering ideas like a guyed mast made from plastic pipe I decided the best solution would be a photographic tripod, if only I could devise a way of mounting the antenna on it.

After scouring eBay for a suitable tripod I came across this one from British firm Strand Europe. Unfortunately this won’t be much help if you’re not in Britain as the seller will only post to the United Kingdom.

The tripod is short enough when collapsed to fit inside the WalkHam carrying case – the stumbling block for most of the ones I looked at which were just a bit too long. What’s more, the panning handle can be secured in the vertical position and fits inside the WalkHam’s mounting pole like it was made for it! So no modifications are needed and you can still use the tripod for photography if you want.

The same day that the tripod arrived I received an email from Alex giving details of his own tripod recommendation. He wrote:

“The perfect tripod is the VIVITAR VIV-VPT-1250. It is a 50” unit and the lightest and most inexpensive VIVITAR unit that can be found for less than U$ 10.00. The secret is take off the camera head with a Phillips screwdriver and leave the aluminum tube on the top. It must be  marked with a pencil at 4 inches (12 cms): that is the maximum extension that can be used to introduce something to avoid any pressure on the antenna elements. Without the camera head the tripod can be collapsed and carried inside the antenna bag.”

I couldn’t find the Vivitar for as little as $10 in the UK so I’m content with my purchase. My only reservation is that the tripod is much lighter than the antenna (a good point for the person carrying it of course) and might be inclined to blow over if used in much of a breeze. I’ll find out when I manage to try it! I can’t say whether Alex’s recommended model would be any better in that respect.

Despite my interest in boat-anchors I do find myself peeking ‘over the wall’ from time to time and taking a look at new and emerging technologies. After several demonstrations from friends I had become convinced of the incredible potential of software defined radios and even found thinking about owning one … one day.

Software (Linux) : After poor results with the software running on MS Windows I moved across to Linux and got it working well there. I can’t point you to a single howto for this because I used several different guides and tried a few things before it started working. The most helpful, and probably all you really need, are the build-gnuradio script which gets hardware support and gnu-radio running and the “Getting Started With RTL-SDR” page by Tom Nardi which covers installing Gqrx. All the software used is in development and requires familiarity with the command line to install and use at the moment.

I participated in the QRP-ARCI Summer Homebrew Sprint for only a very little this afternoon.  But thankfully, quality is not defined by quantity, so the QSOs, while few in number were great in fun.

I began by operating on 20 Meters.  The Buddistick was set up with two 11 inch arms, the coil and the super long whip atop the Jeep on the magmount.  With my coil tapped in the normal 20 Meter spot that I am accustomed to, the Autek analyser displayed an SWR of 1.4:1.  I hit the ATU button anyway, for a very short “Brrrrp” and got a 1:1 match.

While on 20 Meters, as I was calling “CQ QRP” for a bit, and much to my surprise I was answered by Fred G4HOM out of Birmingham, England.  He was much louder than the stateside stations that I was working; so I immediately thought “tower and beam”. Nope!  Fred was using his K2 at 10 Watts to a simple wire – propagation, being what it was, favored a QSO between Lake George and Birmingham.  Signal reports were good both ways.

Shortly thereafter, I switched to 40 Meters by undoing the tap from the coil to take advantage of the entire Buddistick coil, and I added two more 11 inch arms.  After a bit of a scare that I won’t go into here (due to my own stupidity), the KX3 had matched the Buddistick to 1.4:1 on 40 Meters. I had several QSOs down around 7.030 MHz, including one with my very good friend Bob, W3BBO.  This was our first QSO while I have been at Lake George.  He had a good 579 signal and gave me a good report as well.

The Buddistick on the magmount, using the vehicle as a ground plane is great combination.  Thanks to W3BBO for getting me to try that.  It works so well that I may just forego using the EFHW wires unless I am on the hiking trail later this week.

Oh, I don’t remember if I mentioned this; but I decided to leave the Lead Acid battery home.  I am going strictly with the Lithium Ion this week.  It held up very well this afternoon.  I never dropped from 5 Watts output throughout the couple of hours of operating time this afternoon, including a few prolonged “CQ QRP” sessions.  I think “The Little Blue Guy” will be quite adequate for my needs.

72 de Larry W2LJ
QRP – When you care to send the very least!

It took a little while but I finally got the video for the Katy Amateur Radio Society summer field day together. I didn’t shoot as much video or as many photographs this year as I actually spent time a fair amount of time operating for a change!

Hopefully it will still be an entertaining, if short, reminder of those two days in June.

Katy Amateur Radio Society – Summer Field Day 2012 from Owen Morgan on Vimeo.

Posted with Blogsy

Well, this afternoon and tonight. It starts at 4:00 PM Eastern and lasts until 8:00 PM. And this will be the first big test of the KX3 in the portable environment.

We are up here at the Lake (George); and what a difference location makes. When we got here, I called my friend who is staying at our house and is dog sitting for us. He told me that back in South Plainfield, it was 102F (39C). Up here at the lake, it was a beautiful 78F (26C).

So the plan for today will be to operate from right near the cabin. I think I will go with the Buddistick attached to the magmount using the Jeep as the ground plane. That arrangement has worked well in the past. I will probably stick to 20 and 40 Meters; but may also give 15 Meters a try. According to the latest solar-terrestrial chart, 15 Meters should be in good condition today.

I brought the Autek antenna analyzer along to help quicken the process of setting up the Buddisitck. Thinking about it, I probably could have left it home. Using the Buddistick on the magmount is actually quite easy to set up. All I really have to do is set up the “standard” configuration, set the tap on the coil for loudest receive noise and let the KX3’s auto tuner handle the rest. The analyzer comes in real handy when setting the BStick up in the field and for dealing with finding the best length for the counterpoise wire.

So hopefully, i will hear some of you on the bands later today. Please give a listen for ol’ W2LJ.

72 de Larry W2LJ
QRP – When you care to send the very least!

Amateur Radio operators from around Colorado will be climbing many of Colorado’s 14,000-foot mountains to set up amateur radio stations in an effort to communicate with other radio amateurs across the state and around the world. The prime operating hours on August 5th are from approximately 9 AM to noon local time (1500 to 1800 UTC), but activity may occur at other times during the day.

New this year: Summits On the Air (SOTA)  activity, which adds 1700 additional potential summits! If you aren’t up to climbing a 14er, there are many other summits to choose from (with a wide range of difficulty). See the W0 SOTA web page for details.

Radio operators that plan to activate a summit should register their name and intended peak at the ham14er Yahoo! group.  To subscribe to the event mailing list, visit the yahoo groups site at . Also, be sure to check out the event information at 14er.org

Frequencies used during the event
Activity can occur on any amateur band including HF and VHF. The 2M FM band plan uses a “calling frequency and move up” approach. The 2M FM calling frequency is 147.42 MHz.  At the beginning of the event, operators should try calling on 147.42 MHz. As activity increases on that frequency, operators should move up the frequency using the standard channel spacing used in Colorado (15 kHz). Don’t just hang out on 147.42 MHz…move up! The next standard simplex frequency up from 147.42 MHz is 147.435 MHz, followed by 147.45, 147.465, 147.480, 147.495, 147.51, 147.525, 147.54, 147.555, 147.57 MHz.

Don’t just hang out on 147.42 MHz…move up and share the band.

Warning: Climbing mountains is inherently a dangerous activity.
Do not attempt this without proper training, equipment and preparation.

Sponsored by The Colorado 14er Event Task Force