AmateurRadio.com

There’s been a bit of radio silence over the last 2 weeks. mainly because I’ve not been at home. We spent Christmas and new year up in Scotland and then I started a new job last week away was away from home for 3 days. Hence the quiet conditions. I prefer not to broadcast that I’m away until after the event, just in case.

I did have a couple of hours listening in for the Christmas cumulative but only worked a couple of stations that were very close. Apart from that Santa dig bring me a new antenna for 6m, which was interesting on the way home (My journey down was spent hoping that the cardboard tube would stay in tact, despite torrential rain). This has prompted me to have a rethink about my shack and what kit is going where, what I need and what I can sell on. Plenty to think about.

I hope Santa was good to you and here’s wishing everyone an active new year.

Alex Hill, G7KSE, is a regular contributor to AmateurRadio.com and writes from Cumbria, UK. Contact him at [email protected].

I happened upon this posting from Hans PD0AC about the Baofeng UV-B5 handheld transceiver. Hans has written a number of useful reviews on the El Cheapo Radios from China, so when he wrote “The Baofeng UV-B5 is close to perfect”, it caught my attention. I have a couple of the other radios from China that I blogged about here and … Continue reading …
Bob Witte, KØNR, is a regular contributor to AmateurRadio.com and writes from Colorado, USA. Contact him at [email protected].

Happy Three Kings or Epiphany – and to our Orthodox brothers and sisters, Merry Christmas!

Now that the Christmas season is approaching its end (next weekend for Roman Catholics), it’s not too early to start to think about the inaugural outdoor QRP event for 2013 ……..

Freeze Your Buns (or Butt, if you prefer) Off – which should be held the first Saturday of February – the 2nd, which is also Groundhog Day.  So you can freeze your body parts off operating in the Arizona ScQRPions QRP sprint, while simultaneously keeping an eye peeled for groundhogs!

There hasn’t been any official notice of any rule changes for 2013; so if you’d like a refresher on the rules that were used last year, click here.

Last year I made 11 contacts using my PFR3A and the Buddistick on top of the car, and the temperature when I started was 45F (7C).  Accuweather is predicting colder than normal temperatures for the second half of January and all of February.  That would be good for a better multipler; but not so great, comfort wise.

Let’s hope that it’s not like THIS, that day! Or worse yet …. like it was the day before!

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

Yesterday I thought I would set up my Cross Country Wireless SDR-4+ receiver to use for IBP beacon monitoring using Faros. The purpose of this was mainly to reduce the wear and tear on my Elecraft K3 which otherise would have to be on 24 hours a day.

I established that Simon Brown’s SDR-Radio software supported external program control by emulating a Kenwood transceiver. I therefore needed to see if SDR-Radio could be controlled using Omni-Rig, the control mechanism used by Faros.

SDR-Radio supports CAT control using a virtual serial port.

I created a linked pair of virtual serial ports, COM8 and COM9, using VSPE, a virtual serial port emulator. Using the serial ports option of SDR-Radio, I assigned the control port to COM8. Then I used a serial port emulator connected to COM9 (I use RealTerm) to verify that SDR-Radio ‘spoke’ Kenwood. It did. In fact it emulated the Kenwood protocol well enough to fool KComm into thinking it was talking to an Elecraft K2. So far so good.

Now to see if Omni-Rig could control SDR-Radio. Omni-Rig uses “rig files” to define the command set of different radios and it includes one for generic Kenwood. Unfortunately it did not work with SDR-Radio: the receiver indicator of Faros turned red to indicate a fault.

I downloaded the rig file documentation and debug tools from Omni-Rig’s site and tried hacking the Kenwood rig file to get it to work with Omni-Rig by trial and error. But no luck. Whatever I did, the program reported an error with the inscrutable message: “RIG1 Status commands already in queue”.

Error messages reported by Omni-Rig

So it looks as if I’ve hit a brick wall. Clearly there is something in SDR-Radio’s emulation of the Kenwood protocol that Omni-Rig doesn’t like. If anyone else would like to have a go solving this problem, be my guest.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

Over all it was a very good year as I and my family had good health (I did have a cancer scare but things turned out to be ok).

1.The year started out with me earning my way toward the  ARRL Diamond DXCC award, I wanted to do it QRP style and well I came up short with only 83 DXCCs for the year. BUT having said that I am very very happy with the results of 83 contacts and I am sure I can snag the others this year for a DXCC award in the QRP category.

2. A new radio arrived as well the Elecraft KX3 and that sure is some radio and I  have not yet been able to give it a real good workout.

3. I started out 2012 wanting to increase my CW coping speed for contests and the best way for me to do that was to get on the keyboard.  My keyboard skill is find expect for the numbers and where they were without looking. I have now accomplished that goal as well. I had used various CW programs to help me out with the speed and getting the numbers and keyboarding are now in harmony.

3. I wanted to clean up the shack of unused ham gear no sense it sitting there taking up space....that was done (my beloved KX1 included). I was very surprised at the amount of money that came in from stuff that I was not using......now I am looking at my K2 along with the external Elecraft tuner and amp (100 watt) and thinking of putting in up on the auction block. I have the Elecraft K3, KX3 and ordered another K2 to build and sell over the winter months when ham radio is slow.


4. I was able to work my first split contact which to me was pretty cool.

5. I starting posting videos on Youtube up to this point I have a total of 8 videos, 22 followers and 5,638 views to date. It was rough going at first trying to figure out how to upload, edit the video and getting my Iphone to do a half decent job of recording as that is all I have as of yet.

6. During the summer months I was able to pack up and use my Elecraft K2 for some short QRP CW contests. It was nice to get out in a local park and operate the rig.

7. I descovered the art of QRPp operations and was able to top my miles per watt award

8. My kit building was strong and included Qrpometer, Hendrick attenuator, KX3 (kinda a kit), starting a new Elecraft k2, Smart charger, adding a gell cell to my  K2 as well as some mod's to the Elecraft K3.

9. For some strange reason it was the first year I have not gone to  any ham radio flea markets.....not sure why that is?  Wait a minute I can think of one reason....lots of junk!!












Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].