AmateurRadio.com

Whilst operating the GB4LBC special event station on Sunday we had a very urgent knock on the door. The station manager burst through and announced that the crew were launching for real. We stopped the session immediately and got well out the way.

The crew managed to get the boat into the water in what seemed to be seconds and before long they were out of sight and off to help a struggling fishing boat. It made the sos radio week just that little bit more realistic and hopefully it was just as one off.

Let’s hope that next weekend is not as busy for them but just as busy for us. Our 250 or do contacts, mainly on Sunday, were very much appreciated and thanks to everyone who took the time to answer our calls.

Alex Hill, G7KSE, is a regular contributor to AmateurRadio.com and writes from Cumbria, UK. Contact him at [email protected].

I have heard it said that everyone learns differently.  That is most likely true; but I am living proof that even one single person can learn things in different ways – namely the easy way and the hard way.

The weather today in NJ has been really cold.  When I woke up this morning, it was 15F (-9C) outside.  As I returned home from work tonight, it was 16F (-8C).  It’s a very clear night with the Moon and Jupiter shining brightly in the sky. I will not be surprised if we get down into the single digits tonight.

Why do I bring this up?  Because of a lesson learned the hard way.

When I was a kid, I spent my summers at the grocery store that my Dad and my uncle owned.  It was a small, family owned “Mom and Pop” kind of place.  The entire width of our store probably wouldn’t amount to more than three aisles in a supermarket of today.

We sold groceries and meats.  My Dad and my uncles were butchers as well as grocers.  From the age of 7 and up, I worked most of my summer vacation time at our store, stocking shelves.  When I got to be a teenager, I wanted to graduate from shelf stocking to butchering.  My Dad was reluctant and was never thrilled with the idea; but I bugged him until he taught me.  My last several summers of working at the store involved stocking shelves; but I also got to cut cold cuts, make chopped meat, bone out cuts of beef, pork and veal for kielbasa stuffing, among other things.  But perhaps the toughest job of all was when chickens came in.  We were a dealer for Perdue chickens – fresh chickens that were packed in ice – never frozen.  When the whole chickens came in, I was given the delightful job of removing the livers and necks.  They came packed in wax paper inside the chickens, exactly the same way that giblets and necks come delivered inside your Thanksgiving turkey.  But imagine if you will, removing the livers and necks from many dozens of ice cold chickens, all in one sitting. After a while, I couldn’t even feel my hands as they were numbed by the ice cold chicken flesh.  And of course, it had to be done this way, because you couldn’t let the chickens warm up.

My point?  I had to learn the hard way, what my Dad tried to tell me.  Stick your hands in cold meat for a long enough time and you’re going to develop arthritis in your hands.  By the time my Dad retired, his hands were pretty disfigured.  He never removed his wedding band, but even if had wanted to, his knuckles were so permanently swollen and his fingers were so crooked, that it would have been an impossibility.  And now, when it get this cold, MY hands feel like two giant toothaches, even with Thinsulate gloves on.  I didn’t butcher meat for anywhere near as long as he did; but those 5 – 7 summers were enough. Now I will suffer with “mildly” arthritic hands for the rest of my life – a lesson learned the hard way.

But, I’m not hopeless!  I can learn things the easy way, too.  And I was reminded of that when I read Jim W1PID’s post on AmateurRadio.com this afternoon – “Around The World for Morning Tea” and I was transported back to my youth.  It was stories similar to this that reinforced my desire to become an Amateur Radio operator as a kid.

Travelling the world from a room (in my case, my bedroom) had an appeal that did not fade with time.  A seed was planted that grew to fruition in my very early 20s, when I earned my Novice ticket back in 1978.

I am very glad for that Novice ticket, because it turned out to be learning “the easy way” (relatively speaking).  My intention from “the get-go” was to get on the HF bands.  The Technician class existed back then, too; but held no appeal to me.  For me, Amateur Radio meant getting on the air with the possibility of communicating anywhere around the world.  Whether what actually occurred was communicating down the street or around the state didn’t matter, as long as that possibility also included talking to far away places on the globe remained.  The Novice ticket filled the bill, and thanks to good Elmers who taught me, I was able to procure my license with the least amount of frustration.

I am very grateful for the Novice sub bands that existed at the time.  There were very small slices of 80, 40, 15 and 10 Meters where we were allowed to prowl.  Of course, it was CW only but that and the frequency limitations were our only limitations!  There was plenty of DX to be had and I got my share.

I worked Hams of just about every license class that visited our Novice sections in those days. But of course the majority of other stations worked were other Novices.  We “grew up” together, we learned together, we made the same mistakes together, we honed our skills together.  For most of us, upgrading was our reason for being. And, most importantly, when we upgraded and discovered that VHF/UHF wasn’t the end all and be all of Amateur Radio, we had our HF skills to fall back on.  We were literally eased in to the operating habits and skills required by the higher class licencees.

I often wonder how the loss of that introductory Novice class has affected Amateur Radio in the United States.  I suppose I could research trends and numbers that have occurred since.  But in my heart, I think the impact has not beneficial.  Thankfully, we have a lot of good Elmers out there who are willing to pass on what they have learned, whether by teaching classes, or producing learning materials and software, it is still possible to learn how to be a Ham “the easy way” – not stumbling around by yourself in the dark.

But I still wonder if having the Novice ticket and the Novice sub bands (or something like it) might be an effective tool to avoid the problem of new Hams who find themselves in that “VHF/UHF rut”, and get tired and disenchanted, only to never bother to further explore the varied possibilities of this wonderful hobby.

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

I wrote this short article for our club newsletter in hopes it will encourage some members to upgrade from technician class.

It is a strange privilege we have… this ham radio hobby. This morning while having a quick cup of tea, I travel around the world in under 10 minutes visiting briefly with Israel, Italy, Slovenia and Aruba.

I am transported from my radio room upstairs to places far away. Outside there is fresh snow and it’s 10F. It’s definitely not snowing in Aruba. I stop for a quick visit with Carl, P49V. He’s 2100 miles to my south… at 75F the flowers are blooming. It’s a great place to begin my journey.

I have chatted with Carl before… once in 2010, and again in 2011. We don’t linger for long… just to say a quick hello and exchange signal reports.

I turn the dial and I’m in Israel! 5500 miles away between Egypt and Iraq. Who would imagine. Udi says “Hello,” and wishes me well on my journey.

This strange breakfast navigation is made possible by some modest radio equipment and a simple wire hung from the trees outside. I am using Morse on the 15 meter band. Pure magic to many, rather a common occurrence (though magic none-the-less) for those more practiced in the radio arts.

Between sips of tea I turn north and west to central Italy. It’s somewhat closer to home at 4500 miles. Vanni, I5ECW and I have visited before a few years ago. He sends, “Ciao, Ciao,” and I am on my way to Slovenia to visit with Dan.

Dan, S59N lives south of Austria in central Slovenia. He sits in his shack using mostly homemade equipment. We have chatted nearly 20 times since 2004.

I say “Good Afternoon” to Dan (he’s in a different time zone) and reach again for my tea cup. Barely ten minutes have passed since I turned on the radio set, but already I’ve traveled to the far reaches of the world. I’m ready for some oatmeal.

Jim Cluett, W1PID, is a regular contributor to AmateurRadio.com and writes from New Hampshire, USA. Contact him at [email protected].

As we go from Spring back to Winter.  Yesterday we had a high temperature in the low 50s. Today’s high was in the low 30s. There’s a chance for a light dusting of snow tonight. High temperatures for the next three or four days are not supposed to even make the freezing mark.

I started the big shack clean up this weekend and got maybe a third of the way done – well, maybe a little less.  Step one is tossing out all the junk that’s useless and has no value. Step two will involve reorganizing what I keep. Step three will be to take care of whatever odds and ends are needed.

As expected, I have found a few items that I had looked for in the past, but was never able to find. “Oh, so THAT’S where that was!” I said that a couple times.

Hopefully, if I get a little bit done each night, I should be able to finish this next weekend. Going forward, I really have to avoid the hoarder mindset where I think that I will use every scrap that I save. If it’s not of really useful value, from here on out, it gets tossed.

I had a modicum of success on last night’s Run For The Bacon. The bands were pretty dead. Not sure if that was due to bad propagation, or if everyone was tuckered out from the NFC playoffs. I managed 7 QSOs – two on 40 Meters and five on 80 Meters. As usual, that puts me solidly in the middle of the pack.

Oh, I took a closer look at that “no-name” antenna switch that I had been using, and now I know why the Butternut performed so badly when it was connected to it. It turns out the SO239 connector was not soldered well and only “partial” contact was being made. I guess there is some mighty fine junk out there that is not MFJ!

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

Looks like the folks at American Radio Supply are giving away a Baofeng UV-5R. They’re a sponsor of our site and I’m happy to see them offering this kind of opportunity. If you’re in the market for a new HT, skip on over and check out this little radio! Looks like the contest ends January 31, 2013 at midnight (Eastern time) and is open to licensed U.S. hams.

Do you own a Baofeng UV-5R? Have you used one? If so, what do you think of it?  How does it compare to some of the other inexpensive HTs on the market?

Matt Thomas, W1MST, is the managing editor of AmateurRadio.com. Contact him at [email protected].

This morning we woke up to a covering of a couple of centimetres of snow. It’s fairly wet snow: The temperature is just above freezing so it is already beginning to thaw. This is about as much snow as we usually get here, but the less time it hangs around the better. When it’s cold the smow doesn’t melt and eventually gets compacted into ice which, especially as we are on a hill, is a real nuisance.

I am often asked whether snow on the roof affects the performance of attic antennas. My answer is: Not so as I’ve noticed. The SWR of my attic antennas remains exactly the same (in fact it changes more on hot days when the attic temperature reaches 40 degrees plus, due to expansion.)

My magnetic loop on 30m did not need any re-tuning this morning and the first APRS packet sent was received by a German digipeater. My 2m APRS gateway is also functioning normally. I’ve put the K3 and multiband dipole on beacon monitoring duty and the beacons are coming through just as I would expect. In other words, all is normal.

Perhaps if there was a metre or more of snow I might notice a difference. But I think the amount of frozen water the RF has to pass through on the roof is negligible compared to the clouds it must traverse on its way to and from the ionosphere.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

KX3 on the new Nifty stand viewed at same angle as below pic

Last week I ordered a stand for my KX3 radio I had seen it on the Nifty ham radio site. I was there looking at their new KX3 radio guide. I have one of their guides for each of my radios and they are great. If you want to find a "how to" with your radio instead of searching through your manual these Nifty manuals have it all set out at your finger tips. So back to the KX3 stand.....I was surprised to see they were

KX3 on it's own legs

 offering a stand for the KX3. I have found here in the shack that when the radio is supported by it's own legs for me it sits on a funny angle still. The Nifty stand uprights the radio to a very easy to operate position......for me anyway. I have read some postings about this stand with some saying they didn't notice any real difference between the rigs legs and the new stand from Nifty.
  Also a week or so ago my KXPD3 keyer and KXBC3 NiMH battery charger came in. I have not yet had the time to install the KXBC3 charger. I have mounted the Key and it worked great right great out of the box. The key does come with other springs to change
the tension of the key. Up to this point I have not changed the key spring tension it works fine as it is.
My Begali key that I have was (I thought) giving me problems with extra dit's and dah's at times. It became very frustrating and even after adjusting the key as well as cleaning the contacts I would still have the same

New KX3 key

 problem. The Elecraft key was great and no extra code was being sent at all........it did not take me long to figure it out and for you CW buff's out there you may know what I mean when I say.......The Eleraft key was "loose", that is the best way I can describe it and the Begali is more "tight" The contact spacing on the KXPD3 is wider and in the past I would had seen this as sloppy spacing. BUT..it seems this works best for me and my joy with the code has come back. I then took my Begali key and opened up the contact spacing, now it too works fine for me. For some reason it never occured to me to open up the contact spacing on the key. I thought the tighter the contact spacing the better the keying ability....don't ask me where I got that idea!!
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].