AmateurRadio.com

I posted the other day about the Novice sub bands and how a lot of us got our feet wet there and paid our dues there.  There is a really great Website about the history of the Novice license. You can find it at the Novice Historical Society.

The Novice Class license was issued for a period of almost 50 years, from 1951 until 2000. There are a lot of good stories and photographs in there, and I’m sure if you entered the ranks as a Novice, you will enjoy what you see there. It will bring back a lot of memories, perhaps summed up the best by the following line (not sure right now which Ham said it):

“We didn’t know any better and we were having the time of our lives!”

A lot of names and calls of some prominent QRPers show up in the list there.

If you didn’t become a Ham as a Novice, you should go take a look see and read some really good stories to get a feel of what it was like.

On the other hand, if you WERE a Novice and you haven’t posted your Novice story – please consider doing so!  The stories make for great reading and this truly was an era of Amateur Radio which will never be duplicated.  It deserves to be preserved for posterity.

Oh, and while I’m talking about nostalgia, I got a link through K6MM’s Website – television commercials from the 1950s and 1960s.  Take a look and see how many you can remember – I was able to recall quite a few!

72 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

I was going through my QST this week an had notice an add for a new antenna by SteppIR. In the past I would had just passed by the add but this antenna in the picture had an eye catching look to it. It's called the CrankIR vertical and can be used from 2m to 40m or another unit that goes from 2m to 20m (an 80m unit is in the works) The antenna is great for portable ops, field day, emergency and neighborhood restricted antenna areas...and the list goes on!! For me this antenna can easily fit into a nap-sack and carried out into

Mounted on bench

 the great outdoors, placed in the truck of my Scion IQ and hauled to a park and setup at a picnic bench were I have done many a mini contest from.
So lets look at the nitty gritty of the antenna first off it's made by SteppIR who has a GREAT reputation and has been the choice of many DXpeditions. The 20m version extends to 9 feet and when folded up is only 26 inches. The 40m version is 18 feet and reduces to 30 inches. As far as I am concerned both sizes are very manageable for transporting. I am not gong to high light evey detail as there is a link on this post to the SteppIR CrankIR page with limited info but more to come!!  This antenna is due to make its purchase date in the spring of this year. I did send an email to SteppIR with some questions about the antenna and Bart was very prompt to get back to me.

My Questions were........
1. I did not notice any radials are there any? (I asked this because for portable ops sometime radials can become a pain especially if you are in a park where the public is.)
Bart's answer was.....
The antenna will be designed to work with a single, elevated, tuned radial (included) 
 The crank is for extending or retracting the element around the frame of the antenna. It does not raise/lower the antenna or support tube.

The 40 to 2m retracted

  THERE HAS BEEN SOME COMMUNICATION BETWEEN MYSELF AND STEPPIR SINCE THE POST.....IT WOULD SEEM I MISUNDERSTOOD  AN EMAIL. THE CABLE YOU SEE IN THE PICTURE DOES RAISE AND LOWER THE ANTENNA ELEMENT TO THE DESIRED BAND TO WHICH YOU WANT TO OPERATE IT'S NOT A COUNTER POISE. (MY MISTAKE) BART TOLD ME THERE IS A COUNTERPOISE THAT WILL (THIS IS THE PLAN) EXTEND AND RETRACT FROM THE BASE WITH ANTENNA AS YOU GO FROM BAND TO BAND.
Mike Weir, VE9KK, is a regular contributor to AmateurRadio.com and writes from New Brunswick, Canada. Contact him at [email protected].

The Hamshop.cz Open Keyer is a cute little keyer kit that is Arduino based and runs my open source keyer software.  It features a menu button, three memory buttons, a speed control, a PS2 keyboard connector, and a USB port.  The unit can be powered either through the USB connector or an internal 3 AAA battery pack.  A 1/8″ (3.5 mm) stereo jack is provided to connect your paddle and two phono connectors are for keying your transmitter key and PTT lines.

The brains inside the box is an Atmel ATMega chip running the Arduino bootloader, along with a USB chip.  Essentially it’s an Arduino and the normal Arduino development IDE can talk to it and program it.  As mentioned before it’s intended to run my open source keyer code, but it can be used with any Arduino code including your own keyer implementation. If you don’t need a PTT line for your transmitter, you can easily modify the source code to use the PTT port and a second transmitter keying port.

Most of the circuit is surface mount technology (SMT).  I hadn’t soldered SMT components for several years.  Last year I got my first set of reading glasses, and I found myself cursing the little parts, which in my more youthful years I’d have no problem working with.  This is no fault of Hamshop, just me whining about my age.  Luckily Hamshop pre-installs the ATMega and USB chips, so the most difficult components are taken care of for you.  The enclosure is a very simple but effective extruded aluminum two-piece clamshell or channel with two end pieces for the front and back.  Vinyl decals are provided for the front and back, and an instruction decal is provided for the top.  (Although my callsign is on the front of the unit, note that I did not design the hardware or kit.)

The unit performs well, though I accidentally left it on battery power for a few days and totally drained the batteries.  This prompted me to add a sleep mode feature to my code which is in beta testing and should solve this problem.  One minor issue with the Open Keyer kit is the front speed knob.  On my unit it does not fit well, with not enough of the potentiometer shaft exposed for the knob to grab on to. Ondra, OK1CDJ, at Hamshop tells me that they’re adjusting the alignment of the potentiometer in the next revision to address this problem.

I won’t review the actual keyer software as the documentation for this is here, and naturally I’m a bit biased about it, but it does about anything a CW aficionado would want to do.  All in all the Hamshop Open Keyer is a nice little kit that can be assembled in an evening or two, and is reasonably priced.

(Full disclosure / disclaimer: I do not have a financial interest in Hamshop, and I can’t provide support for this keyer hardware.  Support for the open source code is available on the Radio Artisan discussion group.)

Anthony, K3NG, is a regular contributor to AmateurRadio.com.

Greetings AmateurRadio.com readers!  I have not written in quite awhile, so I feel the need to catch up a bit.  I’ve had so much going on lately that I just had to prioritize what time I have left at the end of the day.  I hope to be posting again on a more regular basis.

First of all, I want to mention that KD2CHE and I tied the knot back in October, on a cliff overlooking Lake Tahoe, on a beautiful (and warm thankfully) day in Incline Village, NV.  We were quite literally a stones throw from California.  The rest of our trip out west was great, including visits to two Silicon Valley surplus shops: Weird Stuff Warehouse, and Halted Supply Company (HSC), as well as HRO in Sunnyvale.  We even had a special tour of LucasFilms/Arts/ILG courtesy of some great friends with connections.  On the plane, on the way back, while leafing through a copy of Monitoring Times I purchased at HRO, I noticed that in an article about Ham Radio Kit Building, Kirk Kleinschmidt mentioned my Amateur Radio Kit Roundup as the source for info on kit building.  While it was a nice surprise, it also got me thinking that I needed to make the guide more accessible.  I will still post the changes here, but as a link to the guide’s new URL: RadioKitGuide.com.  For now it’s just a link to the page at my blog, but will evolve into a full wiki-style site in the near future.

My trusty HTX-10 has been busy these couple of months, logging calls to Alaska, Namibia, Croatia, New Mexico, Colorado, and California to name a few.  Mostly from the Crab Meadow Beach here on Long Island, but the Alaska contact was mobile!   A new addition to the collection is an Atlas 210X HF rig.  This was a holiday present from my better half.  After a couple of months of just listening, I finally put up a 35 foot random wire, and picked up an MFJ 941-D VersaTuner so that I could try and transmit.  It’s very close quarters where we live, so I’m limited in antenna choices, and have to worry about disturbing the neighbors (well, any more than they are already disturbed/disturbing).  I found out earlier in the week, that the setup seems to be very functional on 20 meters, and have talked to Mexico, and Florida so far.  I’m hoping for some good 10 and 15 conditions this weekend so that I can try it out up there.  I’m going to add a counterpoise to the setup and see if it helps me tune up on 40.  80 is out of the question for now, as I seem to obliterate my TV speakers and KD2CHE’s computer monitor when I even try to tune up.  My 5-cent 2 meter dipole has also been working well.  I’ll cover that in a later post.

Transmitter hunting has been pretty good, with the XYL and I usually finding the transmitter quickly, and rarely last.  What’s interesting about that is we are the only team in our hunting club that operates without a doppler.  I also will write a future post on our technique, which in our last hunt, guided us to the bunny way ahead of our technologically superior friends.  Unfortunately, as we arrived at the site, I assumed that we might have been wrong, due to the fact that there were no other cars from the hunters present.  Next time I won’t put my assumptions before my instincts.  In the end, KD2CHE was the one that actually found the box, by using her eyes, while a bunch of us wandered around the woods with our equipment.

That’s all for now.  Maybe I’ll catch one of you on HF this weekend.  73’s !

–Neil, W2NDG

 

 

Neil Goldstein, W2NDG, is a regular contributor to AmateurRadio.com and writes from New York, USA. Contact him at [email protected].

Instead of chasing 80 Meter Foxes, I decided to make an effort in the NAQCC 160 Meter Sprint that was held tonight.  Boy, am I glad I did!

Up until now, I really haven’t had anything that loaded up well on 160 Meters.  When I had my G5RV, it would load on 160 Meters; but barely and you could sure tell the radio wasn’t happy about it.

The 88′ EDZ is about the same. It will load up on 160 Meters; but the autotuner in the K3 takes a painfully long time to achieve a match. And then, if you decide to change frequency – even just a hair, the autotuner begs to be re-tuned.

The W3EDP, however?  I hit the autotune button and within what seems to be about a second and a half, I get a tiny little “BRRRRP” and a 1.1:1 match.  And I can tune around quite a bit without the radio complaining.  I know it’s not the ideal solution for 160 Meters; but it has allowed me to make more 160 Meter contacts in one night than I have in all my 34 years of operating combined.  Seriously, before tonight, I think my total QSO count on 160 Meters was maybe 3 …. 4 – maybe 5 at most?

I made 17 contacts tonight, my best DX being North Carolina, Illinois, Indiana and Ontario.  Not bad for 5 Watts to a compromise antenna, eh? OK, so the W3EDP won’t earn me WAS or DXCC on 160 Meters, but at least now I have another band I can go to when other bands seem dead.

And my good friend Charles W2SH sent me an e-mail the other day, informing me about a book soon to come out from the ARRL on 160 Meter antennas, specifically for those of us who are real estate challenged.  That is a must buy for me once the NJ Hamfest season starts back up again in March.

73 de Larry W2LJ
QRP – When you care to send the very least!

Larry Makoski, W2LJ, is a regular contributor to AmateurRadio.com and writes from New Jersey, USA. Contact him at [email protected].

I just started up Google Chrome and my eye was caught by the minimize, maximize and close buttons in the title bar, which are bright red.

They stick out like a sore thumb. I can’t believe I wouldn’t have noticed it before. Is it just me, or my computer? If the buttons have changed colour, why? My eye is constantly drawn to these bright red buttons. It is a real eyesore.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].

The runaway success of the Elecraft KX3 has resulted in a sharp increase in the number of users of KComm. Even those who use a full-featured logging program in the shack find the simplicity of KComm and the compactness of its user interface (which was designed to fit a netbook) better suited to portable operating.

I received an email from a KComm user in Vienna, Wolfgang OE1MWW who wrote that he found the option to “Use PSK modem” (which uses AE4JY’s PSK Core DLL to operate PSK31 using the sound card) was disabled on his laptop running Windows XP SP3 though it was enabled on his desktop running Windows 7 64-bit. Wolfgang eventually found that replacing the file PSKCore.dll that was installed by KComm with one dowloaded from AE4JY’s website cured the problem.

I am surprised and a bit mystified as to why this occurred. My shack PC also runs Windows XP SP3 (I prefer to stay as far from the bleeding edge as possible) and it uses the same version of PSKCore.dll as is installed with KComm.

KComm’s version is much smaller so I’m hazarding a guess (since I can no longer remember) that it may have been compressed using UPX, an executable file compressor. I used to have a bit of a mania for compressing executable files so I could claim how small they were compared to certain other ham radio bloatware, but in these days of 100GB hard drives it’s probably rather fatuous. Possibly the compression caused an issue with some security software?

Whatever the reason, I’m grateful to Wolfgang for discovering a solution. I have added a note to KComm’s Troubleshooting page and updated the installer package to include AE4JY’s copy of the PSKCore.dll so hopefully new users will not encounter this problem.

Julian Moss, G4ILO, is a regular contributor to AmateurRadio.com and writes from Cumbria, England. Contact him at [email protected].