AmateurRadio.com

Julian G4ILO has an interesting post about using W6CQZ’s JT65-HF software.

“One of the features of JT65-HF is that it automatically links in to the PSK Reporter network so you can see all the stations you heard on a map and, even more interestingly, all those that heard you.”

In 20 minutes on 20m at 5W he managed to be heard twice on the west coast of N America under S9 noise condx. Julian says he can understand “why the mode is so popular, even addictive”.

More info on JT65 from HFLINK. “JT65A is a weak signal digital QSO mode.
JT65A is normally used on HF and 6 meter bands.” Also not to be missed are The Complete Bozo’s Guide to HF JT65A (a work in progress) by Andy K3UK and the ‘smart person’s guide’ to the mother mode WSJT.

Interesting update on IK1ZYW Labs on project to achieve remote control of the FT817. Also a pointer to an interesting page on FT817 Accessories, the external keypad project (circuit, manual & firmware available as well as various configurations of components including reprogrammed and tested chip ATtiny2313-20PU, xtal and 4×4 keypad) and the remote display project (pages under construction).

From the external keyboard info:

“…are you tired of hunting needed functions through F+Sel+A/B/C combinations? Do you want to improve your on-the-air proficiency? You can’t help but always press more keys at a time? Or always retouch the frequency when pushing the F button? An external keypad will let you re-discover the joy of QRPing with the FT-817(ND).

The IK1ZYW Keypad for FT-817(ND) is a wired partial remote control for the little Yaesu transceiver. It was conceived during a 6-hour field session at 2700 m.a.s.l. for a VHF contest in August 2008…”

Several of my blogging compadres have written recently about using the JT65-HF software by W6CQZ so I thought I would give it another try to see if I could understand what all the fuss is about. This is not the first time I have tried the program. I tried it at the beginning of the year. In fact, it was the main reason for upgrading my shack computer because the old one could not decode the received signals quickly enough to give me time to reply to calls. But having got the new PC I found the mode rather uninvolving as contacts are made just by clicking buttons to send computer-determined reports and you can’t even tell which of the signals you can hear is the one you are replying to.

I decided to run the K3 at 5W into the dipole because the K2 was doing 30m APRS gateway duty on the magnetic loop and the two antennas are only a few feet apart. But there was no interference. I’m not sure how much power people normally use on this mode but I might try more next time. My new shack computer coped easily, decoding the received JT65A signals in a second or so despite the fact that it was simultaneously running two APRS gateways one of which was using TrueTTY and a USB sound card to decode the packet data.

I found a free spot on the waterfall, sent a CQ and two people immediately came back to me at the same time. I didn’t decode anything! I called again and this time three people replied! I sent CQ once more and this time the first two must have decided I was either deaf or an idiot which left just one signal on my frequency: OE1LIC, for my first contact of the day. My second CQ raised RZ6AUJ, Alex for another contact and that was all I had time for before dinner.

One of the features of JT65-HF is that it automatically links in to the PSK Reporter network so you can see all the stations you heard on a map and, even more interestingly, all those that heard you. I remembered this and popped up to the shack after dinner to grab a screen shot. As you can see, my 5W to an attic dipole was heard by two stations on the west coast of the USA, and I was only on the air for about 20 minutes! The small blob on the west coast is VE7IRA who was heard by me despite the appalling S9 interference I get on this band, which was reduced to about an S3 by the MFJ-1026 noise canceller using a PA0RDT mini-whip for a noise antenna.

I still find using JT65A on HF feels a bit odd but I can understand why it has become so popular, even addictive. It takes up little band space and doesn’t interfere with other band users unlike a certain R** digital mode. I said this before and didn’t end up doing it but I think I will spend a bit more time using JT65-HF to see what I can work and whether I can join the crowd of enthusiasts for this unusual digital mode.

Looking back over some older email list posts today I came across an interesting exchange of posts on the QRPp list.

In early August Arnie Coro CO2KK announced latest progress on the ‘Super Islander Version 5 QRP transceiver project’. Key design criteria include using “as much as possible parts that could be recycled from easy to find sources of electronic components” such as toroids from PC boards salvaged from failed compact flourescent globes, and other treasures from broken VCRs, TVs and fax machines.

Via the short Wikipedia bio of Arnie Coro I discovered a link to more than seven years of transcripts of his weekly radio program ‘DXers UNnlimited’ broadcast by Radio Habana Cuba. Earlier transcripts are here. He also has a blog last updated in June. They’re practical and full of useful ideas.

One transcript is reproduced on dxzone.com and is an undated description of the project detailing what appears to be the first valve version of the project – I think designed by his friend Pedro, CO7PR. It brings home in a softly stated way the challenges and barriers facing radio enthusiasts in countries which for one reason or another don’t enjoy relatively high wages to afford factory made gear, and who have to be much more resourceful in making do with what they have available to get on the air.

A rude dismissive comment on the QRPp list prompted a firm but calm response from Arnie.

“Yes amigos, it is very easy for people having access to the money and the possibility of buying factory built radios or even well designed kits with full instructions and each and every part required… even washers , to just sign a check or complete and electronic transaction that will bring to  their homes a nice piece of equipment…

But that is not the case for many of us, that do enjoy very much the amateur radio hobby, and think not only about ourselves, but also about those that may benefit from also well designed, easy to assembly and to adjust radios that can be built using locally available parts.

Try to find even the lowest cost ceramic filter for building a single sideband rig in no less than 130 countries around the world and you will meet with the fact that they are impossible to locate, and the same goes for ferrite and powdered iron toroids, IF transformers, RF power transistors, small relays , RF connectors, resistors and capacitors, not to mention quartz crystals and integrated circuits !”

SolderSmoke named Arnie ‘Homebrew Hero’ earlier this year.

Arnie Coro CO2KK

Arnie ended one of his missives to the QRPp list with this plea:

“Maybe one day the International Amateur Radio Union could sponsor a similar project to help promote amateur radio among young persons that live in poor nations where buying a factory made transceiver may be equal to the full salary of a worker during five years or more !!!”

I remember that one of the first QRP designs I ever built (back in the late 1970s) was a simple VXO controlled 6 W 20 m transceiver that appeared in QST (Dec 1978). It was later suggested as a prototype IARU transceiver as ham aid for developing nations.

Arnie’s idea appears much more economical and self reliant, drawing on the potential of recyclable components. It’s also a design thought through from a Cuban perspective rather than a first world one.

You can even hear an interview with Arnie Coro recalling the Bay of Pigs invasion in 1961. [audio]

If you read this blog and you haven’t seen it yet, you don’t have a pulse or you’ve been busier than Lindsay Lohan’s legal team this week and haven’t read any email, blogs, tweets, or forums.  This video of a tower climber ascending a 1700 foot tower has been making its way on the Intertubes:

http://www.youtube.com/v/uhtgsAXmz7U?fs=1&hl=en_US

The narrator is friendly enough and sounds more refined than many of the roughneck tower guys I’ve met and worked with, but I have to question the brains-to-balls ratio of the climber.  While it may not be required to be clipped in at all times, it’s a very good idea, especially at the transitions.  I can’t fathom why a climber wouldn’t clip a lanyard to the tower when pulling themselves on to the very top.  He even putzes around untethered when standing next to the beacon light, digging out a carabiner.  The other climber comes up next to him and clips in before he does.  It would take only one gust of wind or an unexpected move or slip up by the other climber to kill the camera equipped climber.

You can climb untethered and gain some time, but what use is an extra 10 or 15 minutes one day for losing perhaps 40 or 50 years of your life?

The South African national radio society, SARL have come up with what I think is a really inspired idea! They are promoting ‘Take your Handheld to Work Day’ on 1st October. They are asking amateurs across South Africa to take their handhelds to work on the 1st October and demonstrate amateur radio to their friends and colleagues during tea and lunch breaks.

In support of that, I’m planning to make sure that I try and connect to some South African repeaters during the day using Echolink and see if I can make a contact or two. It would be great if others did the same in support of this superb idea.

And of course, handhelds don’t just have to be VHF/UHF. Perhaps FT817s and some simple low power morse activity could feature to show the HF side of the hobby too.

You can read more about the SARL initiative here

Well done SARL. I wonder if some other societies will follow suit – I hope so!